1-Octanol

Last updated
Octanol
1-Octanol.svg
1-Octanol-3D-vdW.png
Names
Preferred IUPAC name
Octan-1-ol
Other names
1-Octanol; n-Octanol; Capryl alcohol; Octyl alcohol
Identifiers
3D model (JSmol)
1697461
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.561 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 203-917-6
82528
KEGG
PubChem CID
UNII
  • InChI=1S/C8H18O/c1-2-3-4-5-6-7-8-9/h9H,2-8H2,1H3 X mark.svgN
    Key: KBPLFHHGFOOTCA-UHFFFAOYSA-N X mark.svgN
  • InChI=1/C8H18O/c1-2-3-4-5-6-7-8-9/h9H,2-8H2,1H3
    Key: KBPLFHHGFOOTCA-UHFFFAOYAH
  • CCCCCCCCO
Properties
C8H18O
Molar mass 130.231 g·mol−1
AppearanceColorless liquid [1]
Odor Aromatic [1]
Density 0.83 g/cm3 (20 °C) [1]
Melting point −16 °C (3 °F; 257 K) [1]
Boiling point 195 °C (383 °F; 468 K) [1]
0.3 g/L (20 °C) [1]
Viscosity 7.36 cP [2]
Hazards
GHS labelling:
GHS-pictogram-exclam.svg
Warning
H319
P264, P280, P305+P351+P338, P337+P313
NFPA 704 (fire diamond)
NFPA 704.svgHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
2
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

1-Octanol, also known as octan-1-ol, is the organic compound with the molecular formula CH3(CH2)7OH. It is a fatty alcohol. Many other isomers are also known generically as octanols. 1-Octanol is manufactured for the synthesis of esters for use in perfumes and flavorings. It has a pungent odor. Esters of octanol, such as octyl acetate, occur as components of essential oils. [3] It is used to evaluate the lipophilicity of pharmaceutical products.

Contents

Preparation

Octanol is mainly produced industrially by the oligomerization of ethylene using triethylaluminium followed by oxidation of the alkylaluminium products. This route is known as the Ziegler alcohol synthesis. [3] An idealized synthesis is shown:

Al(C2H5)3 + 9 C2H4 → Al(C8H17)3
Al(C8H17)3 + 3 O + 3 H2O → 3 HOC8H17 + Al(OH)3

The process generates a range of alcohols, which can be separated by distillation.

The Kuraray process defines an alternative route to 1-octanol, but using C4 + C4 building strategy. 1,3-Butadiene is dimerized concomitant with the addition of one molecule of water. This conversion is catalyzed by palladium complexes. The resulting doubly unsaturated alcohol is then hydrogenated. [4]

Water/octanol partitioning

Octanol and water are immiscible. The distribution of a compound between water and octanol is used to calculate the partition coefficient, P, of that molecule (often expressed as its logarithm to the base 10, log P). Water/octanol partitioning is a relatively good approximation of the partitioning between the cytosol and lipid membranes of living systems. [5]

Many dermal absorption models consider the stratum corneum/ water partition coefficient to be well approximated by a function of the water/octanol partition coefficient of the form: [6]

Where a and b are constants, is the stratum corneum/water partition coefficient, and is the water/octanol partition coefficient. The values of a and b vary between papers, but Cleek & Bunge [7] have reported the values a = 0, b = 0.74.

Properties and uses

With a flash point of 81 °C, 1-octanol is not seriously flammable, though its autoignition temperature is as low as 245 °C. 1-Octanol is mainly consumed as a precursor to perfumes. [3] It has been examined for controlling essential tremor and other types of involuntary neurological tremors because evidence indicates it can relieve tremor symptoms at lower doses than are required to obtain a similar level of symptomatic relief from consumption of ethanol, thereby reducing the risk alcohol intoxication at therapeutic dosages. [8]

1-Octanol hydrogen bonds to Lewis bases. It is a Lewis acid in the ECW model and its acid parameters are EA = 0.85 and C A = 0.87. [9]

See also

Related Research Articles

<span class="mw-page-title-main">Alcohol (chemistry)</span> Organic compound with at least one hydroxyl (–OH) group

In chemistry, an alcohol is a type of organic compound that carries at least one hydroxyl functional group bound to a saturated carbon atom. Alcohols range from the simple, like methanol and ethanol, to complex, like sucrose and cholesterol. The presence of an OH group strongly modifies the properties of hydrocarbons, conferring hydrophilic (water-loving) properties. The OH group provides a site at which many reactions can occur.

<span class="mw-page-title-main">Solubility</span> Capacity of a substance to dissolve in a solvent in a homogeneous way

In chemistry, solubility is the ability of a substance, the solute, to form a solution with another substance, the solvent. Insolubility is the opposite property, the inability of the solute to form such a solution.

<span class="mw-page-title-main">Acetophenone</span> Chemical compound

Acetophenone is the organic compound with the formula C6H5C(O)CH3. It is the simplest aromatic ketone. This colorless, viscous liquid is a precursor to useful resins and fragrances.

<span class="mw-page-title-main">Epidermis</span> Outermost of the three layers that make up the skin

The epidermis is the outermost of the three layers that comprise the skin, the inner layers being the dermis and hypodermis. The epidermis layer provides a barrier to infection from environmental pathogens and regulates the amount of water released from the body into the atmosphere through transepidermal water loss.

In the physical sciences, a partition coefficient (P) or distribution coefficient (D) is the ratio of concentrations of a compound in a mixture of two immiscible solvents at equilibrium. This ratio is therefore a comparison of the solubilities of the solute in these two liquids. The partition coefficient generally refers to the concentration ratio of un-ionized species of compound, whereas the distribution coefficient refers to the concentration ratio of all species of the compound.

<span class="mw-page-title-main">Lipinski's rule of five</span> Rule of thumb to predict if a chemical compound is likely to be an orally active drug

Lipinski's rule of five, also known as Pfizer's rule of five or simply the rule of five (RO5), is a rule of thumb to evaluate druglikeness or determine if a chemical compound with a certain pharmacological or biological activity has chemical properties and physical properties that would likely make it an orally active drug in humans. The rule was formulated by Christopher A. Lipinski in 1997, based on the observation that most orally administered drugs are relatively small and moderately lipophilic molecules.

<span class="mw-page-title-main">Topical medication</span> Medication applied to body surfaces

A topical medication is a medication that is applied to a particular place on or in the body. Most often topical medication means application to body surfaces such as the skin or mucous membranes to treat ailments via a large range of classes including creams, foams, gels, lotions, and ointments. Many topical medications are epicutaneous, meaning that they are applied directly to the skin. Topical medications may also be inhalational, such as asthma medications, or applied to the surface of tissues other than the skin, such as eye drops applied to the conjunctiva, or ear drops placed in the ear, or medications applied to the surface of a tooth. The word topical derives from Greek τοπικόςtopikos, "of a place".

<span class="mw-page-title-main">Tetraethylammonium</span> Polyatomic ion (N(C₂H₅)₄, charge +1)

Tetraethylammonium (TEA) is a quaternary ammonium cation with the chemical formula [Et4N]+, consisting of four ethyl groups attached to a central nitrogen atom. It is a counterion used in the research laboratory to prepare lipophilic salts of inorganic anions. It is used similarly to tetrabutylammonium, the difference being that its salts are less lipophilic, more easily crystallized and more toxic.

In organic chemistry, ethoxylation is a chemical reaction in which ethylene oxide adds to a substrate. It is the most widely practiced alkoxylation, which involves the addition of epoxides to substrates.

Dimethylformamide is an organic compound with the formula (CH3)2N−C(=O)H. Commonly abbreviated as DMF, this colourless liquid is miscible with water and the majority of organic liquids. DMF is a common solvent for chemical reactions. Dimethylformamide is odorless, but technical-grade or degraded samples often have a fishy smell due to impurity of dimethylamine. Dimethylamine degradation impurities can be removed by sparging samples with an inert gas such as argon or by sonicating the samples under reduced pressure. As its name indicates, it is structurally related to formamide, having two methyl groups in the place of the two hydrogens. DMF is a polar (hydrophilic) aprotic solvent with a high boiling point. It facilitates reactions that follow polar mechanisms, such as SN2 reactions.

Skin absorption is a route by which substances can enter the body through the skin. Along with inhalation, ingestion and injection, dermal absorption is a route of exposure for toxic substances and route of administration for medication. Absorption of substances through the skin depends on a number of factors, the most important of which are concentration, duration of contact, solubility of medication, and physical condition of the skin and part of the body exposed.

<span class="mw-page-title-main">PEG 400</span> Chemical compound

PEG 400 is a low-molecular-weight grade of polyethylene glycol. It is a clear, colorless, viscous liquid. Due in part to its low toxicity, PEG 400 is widely used in a variety of pharmaceutical formulations.

<span class="mw-page-title-main">Transdermal</span>

Transdermal is a route of administration wherein active ingredients are delivered across the skin for systemic distribution. Examples include transdermal patches used for medicine delivery. The drug is administered in the form of a patch or ointment that delivers the drug into the circulation for systemic effect.

Druglikeness is a qualitative concept used in drug design for how "druglike" a substance is with respect to factors like bioavailability. It is estimated from the molecular structure before the substance is even synthesized and tested. A druglike molecule has properties such as:

In aquatic toxicology, bioconcentration is the accumulation of a water-borne chemical substance in an organism exposed to the water.

This page provides supplementary data and solvent coefficients for linear free-energy relationships.

<span class="mw-page-title-main">2-Octanol</span> Chemical compound

2-Octanol is an organic compound with the chemical formula CH3CH(OH)(CH2)5CH3. It is a colorless oily liquid that is poorly soluble in water but soluble in most organic solvents. 2-Octanol is classified fatty alcohol. A secondary alcohol, it is chiral.

The n-octanol-water partition coefficient,Kow is a partition coefficient for the two-phase system consisting of n-octanol and water. Kow is also frequently referred to by the symbol P, especially in the English literature. It is also called n-octanol-water partition ratio.

<span class="mw-page-title-main">Topical cream formulation</span>

Topical cream formulation is an emulsion semisolid dosage form that is used for skin external application. Most of the topical cream formulations contain more than 20 per cent of water and volatiles and/or less than 50 per cent of hydrocarbons, waxes, or polyethylene glycols as the vehicle for external skin application. In a topical cream formulation, ingredients are dissolved or dispersed in either a water-in-oil (W/O) emulsion or an oil-in-water (O/W) emulsion. The topical cream formulation has a higher content of oily substance than gel, but a lower content of oily ingredient than ointment. Therefore, the viscosity of topical cream formulation lies between gel and ointment. The pharmacological effect of the topical cream formulation is confined to the skin surface or within the skin. Topical cream formulation penetrates through the skin by transcellular route, intercellular route, or trans-appendageal route. Topical cream formulation is used for a wide range of diseases and conditions, including atopic dermatitis (eczema), psoriasis, skin infection, acne, and wart. Excipients found in a topical cream formulation include thickeners, emulsifying agents, preservatives, antioxidants, and buffer agents. Steps required to manufacture a topical cream formulation include excipient dissolution, phase mixing, introduction of active substances, and homogenization of the product mixture.

Topical drug delivery (TDD) is a route of drug administration that allows the topical formulation to be delivered across the skin upon application, hence producing a localized effect to treat skin disorders like eczema. The formulation of topical drugs can be classified into corticosteroids, antibiotics, antiseptics, and anti-fungal. The mechanism of topical delivery includes the diffusion and metabolism of drugs in the skin. Historically, topical route was the first route of medication used to deliver drugs in humans in ancient Egyptian and Babylonian in 3000 BCE. In these ancient cities, topical medications like ointments and potions were used on the skin. The delivery of topical drugs needs to pass through multiple skin layers and undergo pharmacokinetics, hence factor like dermal diseases minimize the bioavailability of the topical drugs. The wide use of topical drugs leads to the advancement in topical drug delivery. These advancements are used to enhance the delivery of topical medications to the skin by using chemical and physical agents. For chemical agents, carriers like liposomes and nanotechnologies are used to enhance the absorption of topical drugs. On the other hand, physical agents, like micro-needles is other approach for enhancement ofabsorption. Besides using carriers, other factors such as pH, lipophilicity, and drug molecule size govern the effectiveness of topical formulation.

References

  1. 1 2 3 4 5 6 Record in the GESTIS Substance Database of the Institute for Occupational Safety and Health
  2. Bhattacharjee, A.; Roy, M. N. (2010-11-17). "Density, Viscosity, and Speed of Sound of (1-Octanol + 2-Methoxyethanol),(1-Octanol + N,N-Dimethylacetamide), and (1-Octanol + Acetophenone) at Temperatures of (298.15, 308.15, and 318.15) K". Journal of Chemical & Engineering Data. 55 (12): 5914–5920. doi:10.1021/je100170v.
  3. 1 2 3 Falbe, Jürgen; Bahrmann, Helmut; Lipps, Wolfgang; Mayer, Dieter; Frey, Guido D. (2013). "Alcohols, Aliphatic". Ullmann's Encyclopedia of Industrial Chemistry. American Cancer Society. doi:10.1002/14356007.a01_279.pub2. ISBN   978-3527306732.
  4. J. Grub; E. Löser (2012). "Butadiene". Ullmann's Encyclopedia of Industrial Chemistry . Weinheim: Wiley-VCH. doi:10.1002/14356007.a04_431.pub2. ISBN   978-3527306732.
  5. Schwarzenbach, Rene P.; Gschwend, Philip M.; Imboden, Dieter M. (2003). Environmental organic chemistry. John Wiley. ISBN   0-471-35053-2.
  6. McCarley KD, Bunge AL (2001). "Pharmacokinetic Models of Dermal Absorption". Journal of Pharmaceutical Sciences. 90 (11): 1699–1719. doi:10.1002/jps.1120. PMID   11745728.
  7. Cleek RL, Bunge AL (1993). "A new method for estimating dermal absorption from chemical exposure. 1. General approach". Pharmaceutical Research. 10 (4): 497–506. doi:10.1023/A:1018981515480. PMID   8483831. S2CID   24534572.
  8. Bushara K.; et al. (2004). "Pilot trial of 1-octanol in essential tremor". Neurology. 62 (1): 122–124. doi:10.1212/01.wnl.0000101722.95137.19. PMID   14718713. S2CID   9015641.
  9. Vogel, Glenn C.; Drago, Russell S. (1996). "The ECW Model". Journal of Chemical Education. 73 (8): 701. Bibcode:1996JChEd..73..701V. doi:10.1021/ed073p701. ISSN   0021-9584.