LUMIO (space mission)

Last updated
LUMIO
NamesLunar Meteoroid Impact Observer
Mission type Lunar exploration
Mission duration12 months (planned)
Spacecraft properties
SpacecraftLUMIO
Spacecraft type12U CubeSat
Bus CubeSat
Manufacturer Argotec
Launch mass28 kg
Start of mission
Launch date2026 (planned)
Moon orbiter
Orbits Halo orbit
LUMIO mission logo.jpg
Lumio mission logo.  

LUnar Meteoroid Impact Observer (LUMIO) is a proposed lunar exploration mission expected to launch in early 2026. [1] [2] [3] The main goal of the mission is to detect, quantify, and characterize the impacts of near-Earth meteoroids on the lunar far side. [2] The spacecraft consists of a 12-U CubeSat that will operate in a halo orbit around the L2 Lagrange point of the Earth-Moon system. [4] The mission is currently being developed by an international consortium which includes Politecnico di Milano, Argotec, Leonardo, IMT, [5] Nautilus [6] and S&T Norway. [7] [8]

Contents

The main scientific payload of LUMIO is a custom-designed optical camera, called LUMIO-Cam, which will observe the lunar surface in umbra to detect the flashes caused by asteroid impacts. Scientific data from the mission will be integrated with observations from the Earth to elaborate the first complete and accurate model of meteoroids flux in the lunar environment. [2] [3]

Background

Near-Earth meteoroids are fragments of asteroids and comets with sizes ranging from micrometers to meters. [9] These objects impact the Earth and Moon on a daily basis. It is estimated that ~33 tons [3] of these fragments get attracted into Earth's atmosphere every day. However, due to the extreme heat of the atmospheric entry, only a few manage to reach the surface. Since the Moon has no atmosphere, lunar impacts are much more frequent and constitute a constant threat to human and robotic operations on the surface. [10]

When a meteoroid impacts the ground, most of its kinetic energy is suddenly converted into heat which partially vaporizes the impacting mass and scatters secondary debris all around the site. [3] If an impact occurs where the surface is in umbra, it appears as bright flash, which can be detected by optical telescopes on the Earth. The intensity of the flashes can be measured to determine the kinetic energy of the meteoroid. [11]

However, observations from Earth must be performed at nighttime and are often disturbed by atmospheric events. Moreover, only those impacts that occur on the observable face of the Moon can be detected. [2]

On the contrary, LUMIO will have a constant and unobstructed view on the lunar far side from its orbit around the L2 Earth-Moon Lagrangian point. [4] Since the observation periods (i.e., when the surface is in shadow) are opposite with respect to Earth, LUMIO will considerably increase the monitored portion of the Moon's surface. The measurements coming from the spacecraft, coupled with those from Earth, will provide a more detailed statistics about the probability and distribution of meteoroids impacts on the Moon. [12]

Spacecraft

LUMIO will be a 12-U Cubesat with dimensions of 30x20x20 cm, having a maximum wet mass of 28 kg. [2] The platform will be manufactured by Argotec, [1] an Italian aerospace engineering company based in Turin. Argotec has previous experiences in deep-space CubeSats, having designed LICIACube, the companion of NASA's DART spacecraft, [13] and Argomoon, one of the secondary payloads of the Artemis-1 mission. [14]

The spacecraft will be equipped with a propulsion system in order to perform the space maneuvers needed to reach the final orbit and small station-keeping corrections. [1] [15]

Extendable solar arrays produced by IMT will provide enough power during all the phases of the mission. [1] IMT will also manufacture the X-band transponder needed for establishing communications to the Earth and performing navigation routines. [1]

Mission profile

Orbit

The L2 Lagrangian point is specific zone of equilibrium in the combined gravitational field of the Earth-Moon system. At the L2 point, the gravitational attractions of the two celestial objects are combined. Due to this, it exists a particular family of three-dimensional trajectories, called halo orbits, which a satellite can exploit to remain in the vicinity of the Moon without orbiting it. [4]

The LUMIO spacecraft will fly on one of these trajectories, having the possibility of constantly observing the lunar far-side from a distance ranging between 36,000 and 86,000 km. [2]

Mission phases

Phases of the LUMIO mission. LUMIO mission phases.png
Phases of the LUMIO mission.

The LUMIO mission will be divided into four phases: [4]

  1. Parking phase. The spacecraft is launched as a secondary payload and gets released into selenocentric orbit by the carrier. During the 14 days of this phase the CubeSat will begin commissioning.
  2. Transfer phase. LUMIO performs a stable manifold injection maneuver (SMIM) and begins the transfer towards the L2 point. This phase has a duration of 14 days.
  3. Operative phase. The spacecraft executes the halo injection maneuver (HIM) and is inserted into the operational orbit. During this 1-year phase, LUMIO will perform all its scientific tasks and relay the data back to Earth. Multiple station-keeping maneuvers will take place to keep the satellite in the nominal trajectory.
  4. End of life. At the end of the operative phase, LUMIO will perform a final maneuver for the safe disposal of the spacecraft.

Scientific payload

The LUMIO-Cam is the main scientific instrument of the LUMIO mission. It will be designed and manufactured by Leonardo, in their facilities of Campi Bisenzio (Florence). The camera will have a resolution of 1024 x 1024 pixels [11] and will be able to acquire images in both the visual and near-infrared spectrums. [2] The refresh rate will be of 15 frames per second in order to detect flashes with duration as fast as 30 ms. [11]

The camera will have a focal length of 127 mm, obtaining a Field-Of-View of 6.0º. This angular size is just enough to perform full disk observations of the Moon, which has an apparent size of 5.6° at the closest point of the trajectory. [11]

When more than 50% of the Moon's surface is illuminated, the glare deriving from the albedo is too intense for observing the flashes on the unlit portion. Due to this, the surface monitoring will be possible only 50% of the time, in 15-days time windows. [11] The spacecraft will perform station-keeping maneuvers and secondary scientific activities while waiting for the next monitoring window.

The amount of data generated by the payload during the scientific phases is close to 5 TB/day. [2] Since this value is too large to be transferred back to Earth, the images will be preliminarly processed on board. Only the images with detected impact flashes will be sent to the ground-stations, effectively reducing the required data transfer to approximately 1 MB/day. [2]

The three phases of the image processing for full disk navigation: image acquisition (1), edge detection (2), ellipse fitting (3). Full disk navigation image processing with moon.png
The three phases of the image processing for full disk navigation: image acquisition (1), edge detection (2), ellipse fitting (3).

The secondary objective of the LUMIO mission is to demonstrate the possibility of performing navigation routines in complete autonomy, without communicating with ground stations. [2] [16] The images from the LUMIO-Cam will be processed by optical navigation algorithms to provide an estimate of the position of the satellite with respect to the Moon. The technique that will be used is called full-disk navigation and It is expected to achieve an operational accuracy of less than 100 km. [16]

With this technique each picture is processed to find the edges of the moon. Then, an ellipse is fitted to reconstruct the location of full lunar limb in the image. The fitted ellipse is the bi-dimensional projection of the three-dimensional Moon ellipsoid onto the image plane. Since the characteristics of the camera and the dimensions of the Moon ellipsoid are known, the ellipse points can be used as a state measurements in a Kalman filter. [16]

See also

Related Research Articles

<i>Lunar Prospector</i> Third mission of the Discovery program; polar orbital reconnaissance of the Moon

Lunar Prospector was the third mission selected by NASA for full development and construction as part of the Discovery Program. At a cost of $62.8 million, the 19-month mission was designed for a low polar orbit investigation of the Moon, including mapping of surface composition including Lunar hydrogen deposits, measurements of magnetic and gravity fields, and study of lunar outgassing events. The mission ended July 31, 1999, when the orbiter was deliberately crashed into a crater near the lunar south pole, after the presence of hydrogen was successfully detected.

<span class="mw-page-title-main">Far side of the Moon</span> Hemisphere of the Moon that always faces away from Earth

The far side of the Moon is the lunar hemisphere that always faces away from Earth, opposite to the near side, because of synchronous rotation in the Moon's orbit. Compared to the near side, the far side's terrain is rugged, with a multitude of impact craters and relatively few flat and dark lunar maria ("seas"), giving it an appearance closer to other barren places in the Solar System such as Mercury and Callisto. It has one of the largest craters in the Solar System, the South Pole–Aitken basin. The hemisphere has sometimes been called the "dark side of the Moon", where "dark" means "unknown" instead of "lacking sunlight" – each side of the Moon experiences two weeks of sunlight while the opposite side experiences two weeks of night.

<span class="mw-page-title-main">Lunar orbit</span> Orbit of an object around the Moon

In astronomy, lunar orbit is the orbit of an object around the Moon.

<span class="mw-page-title-main">Lissajous orbit</span> Quasi-periodic orbital trajectory

In orbital mechanics, a Lissajous orbit, named after Jules Antoine Lissajous, is a quasi-periodic orbital trajectory that an object can follow around a Lagrangian point of a three-body system with minimal propulsion. Lyapunov orbits around a Lagrangian point are curved paths that lie entirely in the plane of the two primary bodies. In contrast, Lissajous orbits include components in this plane and perpendicular to it, and follow a Lissajous curve. Halo orbits also include components perpendicular to the plane, but they are periodic, while Lissajous orbits are usually not.

<span class="mw-page-title-main">Lunar Reconnaissance Orbiter</span> NASA robotic spacecraft orbiting the Moon

The Lunar Reconnaissance Orbiter (LRO) is a NASA robotic spacecraft currently orbiting the Moon in an eccentric polar mapping orbit. Data collected by LRO have been described as essential for planning NASA's future human and robotic missions to the Moon. Its detailed mapping program is identifying safe landing sites, locating potential resources on the Moon, characterizing the radiation environment, and demonstrating new technologies.

<span class="mw-page-title-main">Chandrayaan-2</span> Ongoing Indian lunar orbiter mission

Chandrayaan-2, is the second lunar exploration mission developed by the Indian Space Research Organisation (ISRO), after Chandrayaan-1. It consists of a lunar orbiter, and formerly included the Vikram lander and the Pragyan rover, all of which were developed in India. The main scientific objective is to map and study the variations in lunar surface composition, as well as the location and abundance of lunar water.

The Asteroid Impact and Deflection Assessment (AIDA) missions are a proposed pair of space probes which will study and demonstrate the kinetic effects of crashing an impactor spacecraft into an asteroid moon. The mission is intended to test and validate impact models of whether a spacecraft could successfully deflect an asteroid on a collision course with Earth.

<span class="mw-page-title-main">Near-Earth Asteroid Scout</span> Solar sail spacecraft

The Near-Earth Asteroid Scout was a mission by NASA to develop a controllable low-cost CubeSat solar sail spacecraft capable of encountering near-Earth asteroids (NEA). NEA Scout was one of ten CubeSats launched into a heliocentric orbit on Artemis 1, the maiden flight of the Space Launch System, on 16 November 2022.

<span class="mw-page-title-main">Lunar Flashlight</span> Lunar orbiter by NASA

Lunar Flashlight was a low-cost CubeSat lunar orbiter mission to explore, locate, and estimate size and composition of water ice deposits on the Moon for future exploitation by robots or humans.

<span class="mw-page-title-main">BioSentinel</span> US experimental astrobiology research satellite

BioSentinel is a lowcost CubeSat spacecraft on a astrobiology mission that will use budding yeast to detect, measure, and compare the impact of deep space radiation on DNA repair over long time beyond low Earth orbit.

<span class="mw-page-title-main">Lunar IceCube</span> Nanosatellite launched in 2022

Lunar IceCube is a NASA nanosatellite orbiter mission that was intended to prospect, locate, and estimate amount and composition of water ice deposits on the Moon for future exploitation. It was launched as a secondary payload mission on Artemis 1, the first flight of the Space Launch System (SLS), on 16 November 2022. As of February 2023 it's unknown whether NASA team has contact with satellite or not.

<span class="mw-page-title-main">LunIR</span> Spacecraft

LunIR is a nanosatellite spacecraft launched to the Moon collecting surface spectroscopy and thermography. It was launched as a secondary payload on the Artemis 1 mission on 16 November 2022.

<span class="mw-page-title-main">Lunar Polar Hydrogen Mapper</span> US Moon-orbiting ice-finding satellite

Lunar Polar Hydrogen Mapper, or LunaH-Map, was one of the 10 CubeSats launched with Artemis 1 on 16 November 2022. Along with Lunar IceCube and LunIR, LunaH-Map will help investigate the possible presence of water-ice on the Moon. Arizona State University began development of LunaH-Map after being awarded a contract by NASA in early 2015. The development team consists of about 20 professionals and students led by Craig Hardgrove, the principal investigator. The mission is a part of NASA's SIMPLEx program.

<i>ArgoMoon</i> Nanosatellite

ArgoMoon is a CubeSat that was launched into a heliocentric orbit on Artemis 1, the maiden flight of the Space Launch System, on 16 November 2022 at 06:47:44 UTC. The objective of the ArgoMoon spacecraft is to take detailed images of the Interim Cryogenic Propulsion Stage following Orion separation, an operation that will demonstrate the ability of a cubesat to conduct precise proximity maneuvers in deep space. ASI has not confirmed nor denied whether this took place, but several images of the Earth and the Moon were taken.

Cislunar Explorers is a pair of spacecraft that will show the viability of water electrolysis propulsion and interplanetary optical navigation to orbit the Moon. Both spacecraft will launch mated together as two L-shaped 3U CubeSats, which fit together as a 6U CubeSat of about 10 cm × 20 cm × 30 cm.

<span class="mw-page-title-main">Earth Escape Explorer</span> US experimental communications satellite

Earth Escape Explorer (CU-E3) is a nanosatellite of the 6U CubeSat format that will demonstrate long-distance communications while in heliocentric orbit.

<span class="mw-page-title-main">EQUULEUS</span> Japanese nanosatellite

EQUULEUS is a nanosatellite of the 6U CubeSat format that will measure the distribution of plasma that surrounds the Earth (plasmasphere) to help scientists understand the radiation environment in that region. It will also demonstrate low-thrust trajectory control techniques, such as multiple lunar flybys, within the Earth-Moon region using water steam as propellant. The spacecraft was designed and developed jointly by the Japan Aerospace Exploration Agency (JAXA) and the University of Tokyo.

<span class="mw-page-title-main">OMOTENASHI</span> Small spacecraft and semi-hard lander of the 6U CubeSat format

OMOTENASHI was a small spacecraft and semi-hard lander of the 6U CubeSat format intended to demonstrate low-cost technology to land and explore the lunar surface. The CubeSat was to take measurements of the radiation environment near the Moon as well as on the lunar surface. Omotenashi is a Japanese word for "welcome" or "Hospitality".

<span class="mw-page-title-main">BOLAS (spacecraft)</span>

Bi-sat Observations of the Lunar Atmosphere above Swirls (BOLAS) is a spacecraft mission concept that would orbit the Moon at very low altitude in order to study the lunar surface. The concept, currently under study by NASA, involves two small identical CubeSat satellites connected vertically above the lunar surface by a 25 km long tether. The mission goal would be to understand the hydrogen cycle on the Moon, dust weathering, and the formation of lunar swirls.

<span class="mw-page-title-main">Queqiao relay satellite</span> Chinese satellite

Queqiao relay satellite (Chinese: 鹊桥号中继卫星; pinyin: Quèqiáo hào zhōngjì wèixīng; lit. 'Magpie Bridge relay satellite'), also known as the Chang'e 4 Relay, is a communications relay and radio astronomy satellite for the Chang'e 4 lunar farside mission. As part of the Chinese Lunar Exploration Program, the China National Space Administration (CNSA) launched the Queqiao relay satellite on 20 May 2018 to a halo orbit around the Earth–Moon L2 Lagrangian point Queqiao is the first ever communication relay and radio astronomy satellite at this location.

References

  1. 1 2 3 4 5 "LUMIO". ASI (in Italian). Retrieved 2023-07-06.
  2. 1 2 3 4 5 6 7 8 9 10 Topputo, F.; Merisio, G.; Franzese, V.; Giordano, C.; Massari, M.; Pilato, G.; Labate, D.; Cervone, A.; Speretta, S.; Menicucci, A.; Turan, E.; Bertels, E.; Vennekens, J.; Walker, R.; Koschny, D. (2023-01-01). "Meteoroids detection with the LUMIO lunar CubeSat". Icarus. 389: 115213. doi:10.1016/j.icarus.2022.115213. ISSN   0019-1035. S2CID   251828587.
  3. 1 2 3 4 "LUMIO (Lunar Meteoroid Impact Observer)". www.eoportal.org. Retrieved 2023-07-06.
  4. 1 2 3 4 Cipriano, Ana M.; Dei Tos, Diogene A.; Topputo, Francesco (2018). "Orbit Design for LUMIO: The Lunar Meteoroid Impacts Observer". Frontiers in Astronomy and Space Sciences. 5. doi: 10.3389/fspas.2018.00029 . ISSN   2296-987X.
  5. ↑ "IMT srl" . Retrieved 2023-07-11.
  6. ↑ "Nautilus" . Retrieved 2023-07-11.
  7. ↑ "S[&]T Norway" . Retrieved 2023-07-11.
  8. ↑ "Opening Details". Politecnico di Milano. Retrieved 2023-07-06.
  9. ↑ Cervone, A.; Topputo, F.; Speretta, S.; Menicucci, A.; Turan, E.; Di Lizia, P.; Massari, M.; Franzese, V.; Giordano, C.; Merisio, G.; Labate, D.; Pilato, G.; Costa, E.; Bertels, E.; Thorvaldsen, A. (2022-06-01). "LUMIO: A CubeSat for observing and characterizing micro-meteoroid impacts on the Lunar far side". Acta Astronautica. 195: 309–317. doi:10.1016/j.actaastro.2022.03.032. hdl: 11311/1207340 . ISSN   0094-5765. S2CID   247755451.
  10. ↑ Mohon, Lee (2017-03-06). "About Lunar Impact Monitoring". NASA. Retrieved 2023-07-06.
  11. 1 2 3 4 5 Topputo, Francesco; Merisio, G.; Giordano, G.; Franzese, V.; Cervone, A.; Speretta, S.; Menicucci, A.; Bertels, E.; Thorvaldsen, A (2021). "Current Status of LUMIO Mission: Characterizing Lunar Meteoroid Impacts with a CubeSat". 72nd International Astronautical Conference.
  12. ↑ Merisio, Gianmario; Topputo, Francesco (2023-01-01). "Present-day model of lunar meteoroids and their impact flashes for LUMIO mission". Icarus. 389: 115180. doi:10.1016/j.icarus.2022.115180. ISSN   0019-1035. S2CID   251114167.
  13. ↑ "LICIACube". ASI (in Italian). Retrieved 2023-07-06.
  14. ↑ Croci, Fulvia (2022-03-18). "Missione Artemis: Argomoon il fotoreporter lunare made in Italy scalda i motori sulla rampa di lancio per i test finali". ASI (in Italian). Retrieved 2023-07-06.
  15. ↑ Cervone, A.; Speretta, S.; Menicucci, A.; Bertels, E.; Topputo, Francesco; Merisio, G. (2021). "Selection of the Propulsion System for the LUMIO Mission: an Intricate Trade-Off Between Cost, Reliability and Performance". 72nd International Astronautical Conference.
  16. 1 2 3 Franzese, Vittorio; Di Lizia, Pierluigi; Topputo, Francesco (2018-01-08). Autonomous Optical Navigation for LUMIO Mission. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2018-1977. ISBN   978-1-62410-533-3.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.