The Merensky Reef is a layer of igneous rock in the Bushveld Igneous Complex (BIC) in the North West, Limpopo, Gauteng and Mpumalanga provinces of South Africa which together with an underlying layer, the Upper Group 2 Reef (UG2), contains most of the world's known reserves of platinum group metals (PGMs) or platinum group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium and osmium. The Reef is 46 cm thick and bounded by thin chromite seams or stringers. [1] The composition consists predominantly of cumulate rocks, including leuconorite, anorthosite, chromitite, and melanorite. [2]
The UG2 Reef, the composition of which is relatively consistent throughout the BIC, is rich in chromite. However, the UG2 Reef lacks the Merensky's gold, copper and nickel by-products, though its reserves may be almost twice those of the Merensky Reef. Overall, the Merensky Reef is observed to be a lower layer composed of anorthosite or norite with a thin layer of chromitite over top. [3] In addition, there is commonly a layer overlying both composed of feldspathic pyroxenite. [3] Chromitite layers occur commonly in large mafic layered intrusions. A current theory suggests chromitites form as a result of introduction and mixing of chemically primitive magma with a more evolved magma, which results in supersaturation of chromite in the mixture and the formation of a nearly monomineralic layer on the magma chamber floor. [2] The leading theory regarding the formation of the Merensky reef is that of crystals originating from a main magma source accumulated and cooled as the magma rose resulting in crystallization. [4] Yet the nature of crystallization is complex.
The Merensky Reef is composed of five different layers. [5] The first layer is mottled anorthosite which is pyroxene oikocrysts and is described as dark colored bands. [5] The mottled anorthosite is composed of traces of quartz, titanite and apatite minerals. [5] The second layer is Merensky chromitites which are highly irregular grains of basal chromitite. The third layer is similar to the second layer with Merensky chromitites, however the basal chromitite is compact and smaller in size. [5] The fourth layer is Merensky pegmatite and is composed of coarse-grained silicate with an approximate thickness of 2.6 cm thick. In the fourth layer, chromite is sparse and sulfides are present. [5] The fifth layer is Merensky melanorite and is a fine-grained chalcopyrite, quartz and feldspar rich matrix. [5]
The Merensky Reef has a high concentration of chromitites. However, the chromitites differ from one another in their levels of iridium, ruthenium, rhodium and platinum present. [5] There is reported trace element enrichment shown by arsenic, cadmium, tin and tellurium. [5] The Merensky Reef is similar to the Platreef because of the presence of primitive mantle, layered intrusions and levels of nickel and copper. [5] The Merensky-type reef has been separated into two categories, the orthomagmatic and the hydromagmatic. [6] The orthomagmatic group is composed of platinum group element mineralization. [6] The hydromagmatic group is composed of platinum group element mineralization to volatile-rich fluids separating from a solid cumulate pile. [6]
There are several theories that suggest how the crystallization on the Merensky Reef occurred. The first accepted hypothesis of the Merensky Reef suggests the chromite crystallization originated from hybrid melts and significant lateral mixing of new and resident magma. [6] In detail, the first hypothesis suggests the high of PGE concentrations were a result from the sulfide and silicate melt. [6] The sulfide melt plays an important role in this hypothesis because the sulfide melt is dense and the settling of the melt through the magma column to the floor of the chamber allowed such mixing to occur. [6] One theory suggests the chromite crystallization originated from hybrid melts and lateral mixing. [7] Another theory that suggests the crystallization originated from chromite and sulfide droplets. [8] However, there is also another theory that the crystallization originated from emplaced magma merging with roof-rock melts. [9] In the theory of roof-rock melts, there was contamination between the new magma and silica-rich resident melt. [9] The contamination resulted in chromite and PGM crystallization because the chromite grains attracted the PGM crystals. [9] After crystallization, the crystals were carried in the collapsing margins and formed the layers of chromitite and PGE. [9]
The Bushveld Complex chromitites were first reported by Hall and Humphrey in 1908. [7] The initial recovery of platinum in South Africa took place on several of the large East Rand gold mines and the first separate platinum mine was a short lived venture near Naboomspruit that worked very patchy quartz reefs. The discovery of the Bushveld Igneous Complex deposits was made in 1924 by a Lydenburg district farmer, A F Lombaard. [2] [10] It was recorded to be approximately 80 kilometers in length. [2] [10] This was an alluvial deposit but its importance was recognized by Hans Merensky whose prospecting work discovered the primary source in the Bushveld Igneous Complex and traced it for several hundred kilometres by 1930. [4] Extensive mining of the Reef didn't take place until an upsurge in the demand for platinum group metals used in exhaust pollution control in the 1950s, made exploitation economically feasible. Extraction of metals from the UG2 chromitite could only take place in the 1970s with major advances in metallurgy. [4] The first mine concentrated on the extraction of chrome-rich UG2 platinum on the reef and was named the Lonmin mine. [11]
Gabbro is a phaneritic (coarse-grained), mafic intrusive igneous rock formed from the slow cooling of magnesium-rich and iron-rich magma into a holocrystalline mass deep beneath the Earth's surface. Slow-cooling, coarse-grained gabbro is chemically equivalent to rapid-cooling, fine-grained basalt. Much of the Earth's oceanic crust is made of gabbro, formed at mid-ocean ridges. Gabbro is also found as plutons associated with continental volcanism. Due to its variant nature, the term gabbro may be applied loosely to a wide range of intrusive rocks, many of which are merely "gabbroic". By rough analogy, gabbro is to basalt as granite is to rhyolite.
Ore is natural rock or sediment that contains one or more valuable minerals concentrated above background levels, typically containing metals, that can be mined, treated and sold at a profit. The grade of ore refers to the concentration of the desired material it contains. The value of the metals or minerals a rock contains must be weighed against the cost of extraction to determine whether it is of sufficiently high grade to be worth mining, and is therefore considered an ore. A complex ore is one containing more than one valuable mineral.
Dunite, also known as olivinite, is an intrusive igneous rock of ultramafic composition and with phaneritic (coarse-grained) texture. The mineral assemblage is greater than 90% olivine, with minor amounts of other minerals such as pyroxene, chromite, magnetite, and pyrope. Dunite is the olivine-rich endmember of the peridotite group of mantle-derived rocks.
Anorthosite is a phaneritic, intrusive igneous rock characterized by its composition: mostly plagioclase feldspar (90–100%), with a minimal mafic component (0–10%). Pyroxene, ilmenite, magnetite, and olivine are the mafic minerals most commonly present.
The platinum-group metals are six noble, precious metallic elements clustered together in the periodic table. These elements are all transition metals in the d-block.
Chromite is a crystalline mineral composed primarily of iron(II) oxide and chromium(III) oxide compounds. It can be represented by the chemical formula of FeCr2O4. It is an oxide mineral belonging to the spinel group. The element magnesium can substitute for iron in variable amounts as it forms a solid solution with magnesiochromite (MgCr2O4). A substitution of the element aluminium can also occur, leading to hercynite (FeAl2O4). Chromite today is mined particularly to make stainless steel through the production of ferrochrome (FeCr), which is an iron-chromium alloy.
Peridotite ( PERR-ih-doh-tyte, pə-RID-ə-) is a dense, coarse-grained igneous rock consisting mostly of the silicate minerals olivine and pyroxene. Peridotite is ultramafic, as the rock contains less than 45% silica. It is high in magnesium (Mg2+), reflecting the high proportions of magnesium-rich olivine, with appreciable iron. Peridotite is derived from Earth's mantle, either as solid blocks and fragments, or as crystals accumulated from magmas that formed in the mantle. The compositions of peridotites from these layered igneous complexes vary widely, reflecting the relative proportions of pyroxenes, chromite, plagioclase, and amphibole.
The Bushveld Igneous Complex (BIC) is the largest layered igneous intrusion within the Earth's crust. It has been tilted and eroded forming the outcrops around what appears to be the edge of a great geological basin: the Transvaal Basin. It is approximately 2 billion years old and is divided into four different limbs: the northern, southern, eastern, and western limbs. The Bushveld Complex comprises the Rustenburg Layered suite, the Lebowa Granites and the Rooiberg Felsics, that are overlain by the Karoo sediments. The site was first discovered around 1897 by Gustaaf Molengraaff.
The Great Dyke is a linear geological feature that trends nearly north-south through the centre of Zimbabwe passing just to the west of the capital, Harare. It consists of a band of short, narrow ridges and hills spanning for approximately 550 kilometres (340 mi). The hills become taller as the range goes north, and reach up to 460 metres (1,510 ft) above the Mvurwi Range. The range is host to vast ore deposits, including gold, silver, chromium, platinum, nickel and asbestos.
A layered intrusion is a large sill-like body of igneous rock which exhibits vertical layering or differences in composition and texture. These intrusions can be many kilometres in area covering from around 100 km2 (39 sq mi) to over 50,000 km2 (19,000 sq mi) and several hundred metres to over one kilometre (3,300 ft) in thickness. While most layered intrusions are Archean to Proterozoic in age, they may be any age such as the Cenozoic Skaergaard intrusion of east Greenland or the Rum layered intrusion in Scotland. Although most are ultramafic to mafic in composition, the Ilimaussaq intrusive complex of Greenland is an alkalic intrusion.
Cumulate rocks are igneous rocks formed by the accumulation of crystals from a magma either by settling or floating. Cumulate rocks are named according to their texture; cumulate texture is diagnostic of the conditions of formation of this group of igneous rocks. Cumulates can be deposited on top of other older cumulates of different composition and colour, typically giving the cumulate rock a layered or banded appearance.
The Windimurra Igneous Complex is a giant ultramafic-mafic intrusion emplaced within the Yilgarn craton of Western Australia. It is located approximately 100 kilometres south east of the town of Mount Magnet.
Troctolite is a mafic intrusive rock type. It consists essentially of major but variable amounts of olivine and calcic plagioclase along with minor pyroxene. It is an olivine-rich anorthosite, or a pyroxene-depleted relative of gabbro. However, unlike gabbro, no troctolite corresponds in composition to a partial melt of peridotite. Thus, troctolite is necessarily a cumulate of crystals that have fractionated from melt.
Fractional crystallization, or crystal fractionation, is one of the most important geochemical and physical processes operating within crust and mantle of a rocky planetary body, such as the Earth. It is important in the formation of igneous rocks because it is one of the main processes of magmatic differentiation. Fractional crystallization is also important in the formation of sedimentary evaporite rocks.
In geology, an igneous intrusion is a body of intrusive igneous rock that forms by crystallization of magma slowly cooling below the surface of the Earth. Intrusions have a wide variety of forms and compositions, illustrated by examples like the Palisades Sill of New York and New Jersey; the Henry Mountains of Utah; the Bushveld Igneous Complex of South Africa; Shiprock in New Mexico; the Ardnamurchan intrusion in Scotland; and the Sierra Nevada Batholith of California.
Chromitite is an igneous cumulate rock composed mostly of the mineral chromite. It is found in layered intrusions such as the Bushveld Igneous Complex in South Africa, the Stillwater igneous complex in Montana and the Ring of Fire discovery in Ontario.
Creighton Mine is an underground nickel, copper, and platinum-group elements (PGE) mine. It is presently owned and operated by Vale Limited in the city of Greater Sudbury, Ontario, Canada. Open pit mining began in 1901, and underground mining began in 1906. The mine is situated in the Sudbury Igneous Complex (SIC) in its South Range geologic unit. The mine is the source of many excavation-related seismic events, such as earthquakes and rock burst events. It is home to SNOLAB, and is currently the deepest nickel mine in Canada. Expansion projects to deepen the Creighton Mine are currently underway.
The Stillwater igneous complex is a large layered mafic intrusion (LMI) located in southern Montana in Stillwater, Sweet Grass and Park Counties. The complex is exposed across 30 miles (48 km) of the north flank of the Beartooth Mountain Range. The complex has extensive reserves of chromium ore and has a history of being mined for chromium. More recent mining activity has produced palladium and other platinum group elements.
Braggite is a sulfide mineral of platinum, palladium and nickel with chemical formula: S. It is a dense, steel grey, opaque mineral which crystallizes in the tetragonal crystal system. It is the central member in the platinum group end-members cooperite and vysotskite.
Potholes are frequently encountered during mining operations in the Bushveld Igneous Complex in South Africa. Two orebodies, the Upper Group 2 (UG2) and the Merensky Reef, host about 70% of the world's platinum group metals (PGM), and pose major extraction problems for the mining industry in their faults, dykes, joints, domes, iron-rich ultramafic pegmatoids, rolls and dunite pipes. The greatest mining problems, though, are presented by potholes.