Passing lane

Last updated • 7 min readFrom Wikipedia, The Free Encyclopedia
A car passes a slower moving truck, using a passing lane on the A2 motorway in Slovenia Prehitevanje.jpg
A car passes a slower moving truck, using a passing lane on the A2 motorway in Slovenia

A passing lane (North American English), overtaking lane (English outside North America) is a lane on a multi-lane highway or motorway closest to the median of the road (the central reservation) used for passing vehicles in other lanes. (North American usage also calls the higher-speed lane nearest the median the "inside lane" but in the United Kingdom this is the "outside lane".) Countries with right-hand traffic put the passing lane on the left; those with left-hand traffic put the passing lane on the right. Motorways typically have passing lanes along their entire length, but other roads might only have passing lanes for certain segments, depending on design specifications typically related to available space, funding, and traffic levels. A 2+1 road alternates the passing lane between directions every few kilometers/miles.

Contents

The passing lane is commonly referred to as the fast lane, and the lane closest to the shoulder the slow lane. Some jurisdictions, particularly on limited-access roads, ban passing-lane driving while not overtaking another vehicle; others merely require slower cars to yield to quicker traffic by shifting to slower lanes, or have no limitations.

On roads with only one lane in a given direction, overtaking is accomplished by briefly pulling into oncoming traffic. This is often prohibited by "no passing" signs and road markings on lengths of road where a hill or a curving road limit sight distances, and some jurisdictions ban this entirely. So-called suicide lanes provide a shared third center lane for passing in both directions, with the expectation that drivers will check for oncoming traffic before entering.

In modern traffic planning, passing lanes on freeways are usually designed for through/express traffic, while the lanes furthest from the median of the road have entry/exit ramps. However due to routing constraints, some freeways may have ramps exiting from the passing lane; these are known as "left exits" in North America.

Misuse and common practice in the United States

An SUV prepares to pass a slower moving car, using a passing lane in rural Utah Passing vehicle I-15 rural Utah July 2011.jpg
An SUV prepares to pass a slower moving car, using a passing lane in rural Utah

Common practice and most law on United States highways is that the left lane is reserved for passing and faster moving traffic, and that traffic using the left lane must yield to traffic wishing to overtake.

The United States Uniform Vehicle Code states:

Upon all roadways any vehicle proceeding at less than the normal speed of traffic at the time and place and under the conditions then existing shall be driven in the right-hand lane then available for traffic ...

It is also illegal in many states in the US to use the "far left" or passing lane on a major highway as a traveling lane (as opposed to passing), or to fail to yield to faster moving traffic that is attempting to overtake in that lane. For example, Colorado's "Left Lane Law" states:

A person shall not drive a motor vehicle in the passing lane of a highway if the speed-limit is sixty-five miles per hour or more unless such person is passing other motor-vehicles that are in a non-passing lane... [1]

In some states, such as Maine, [2] Massachusetts, [3] Missouri, [4] Montana, [5] New Jersey, [6] and Washington, [7] the center lanes on highways with three or more lanes in each direction are also passing lanes. In those states, no matter how many lanes there are on the highway, drivers must not leave the right-hand lane unless they are overtaking slower vehicles, making a left turn or exit, or obeying a move over law.

In California does not explicitly prohibit cruising in the left lane. However, prohbits passing to the right and similar to the states below, slow traffic must stay right.

In other states, such as Massachusetts, [8] New Jersey, [9] Illinois, [10] Pennsylvania, [11] and others, [12] it is illegal to fail to yield to traffic that seeks to overtake in the left lane, or to create any other "obstruction" in the passing lane that hinders the flow of traffic. As a result, heavy trucks are often prohibited from using the passing lane.

The left lane is commonly referred to as the "fast lane", but that is not an accurate description of the lane's purpose. The left lane is the designated passing lane; however, vehicles in the left lane must obey the posted speed limits. A common problem arising from misuse of the left lane is speeding and tailgating. These actions create road rage and increase overall danger.

A driver hoping to pass a slow motorist in the "fast lane" can be stuck in an awkward situation. One strategy is to signal a lane change toward the center median. Another is to flash headlights. A third, which is dangerous and illegal, is to drive very close to the "fast lane" driver's bumper (this is known as tailgating).

Most commonly, motorists will attempt to overtake the outer car on the inner lane either to continue at a fast pace or to pass a car that is going too slowly in the passing lane. On high-capacity multilane freeways (three or more lanes per direction), many motorists often pass on the inner lane, largely in response to misuse of the "passing lane" by slower traffic.[ citation needed ]

In some areas, such as the U.S. states of Colorado and Kentucky, vehicles in the left lane are required to yield to faster traffic only if the speed limit is above 65 miles per hour. In other areas, like Alaska, there is no law requiring slower traffic to move over for faster traffic. [12]

A map of the United States showing the lane discipline laws of each state. Highway Lane Discipline Laws by State.png
A map of the United States showing the lane discipline laws of each state.

Signage

A sign indicating that all vehicles shall be driven only in the right-hand lane unless overtaking slower vehicles. MUTCD R4-16.svg
A sign indicating that all vehicles shall be driven only in the right-hand lane unless overtaking slower vehicles.

The use of passing lanes for faster traffic is sometimes acknowledged with signs using phrases such as "Slower Traffic Keep Right" [14] (in Canada, where the passing lane is to the left). In a study by the AASHTO Subcommittee on Traffic Engineering, all 24 U.S. states involved used some form of passing lane courtesy signage, 9 of which only use those signs for steep graded roads. [15]

Proper use

Many areas which make it illegal to fail to yield to faster traffic also have exceptions to those rules. Some of these exceptions include preparing to make a left turn, taking an exit located on the left side of the roadway, avoiding traffic merging onto the roadway, or overtaking and passing another vehicle.

In the province of Quebec, it is illegal to travel in the left lane when not passing when the speed limit is over 80 km/h (50 mph). [16]

Ontario's Highway Traffic Act does spell out when the left-hand passing lane can be used. The act says the left lane should be left open for passing. Vehicles travelling slower than “the normal speed of traffic” must use the right lane.

Truckers often use the passing lane in moderate traffic where legal to do so to reduce travel times, however in many areas, tractor trailers are banned from using the passing lane for safety reasons; these restrictions are normally found along urban, often congested highways with multiple lanes (e.g. Interstate 40 west of Raleigh, North Carolina), or on rural freeways with 6 or more lanes (3 in each direction).

Hammer lane

The hammer lane is another term for the passing lane. Its etymology originated with truckers in North America in reference to slamming the accelerator with a foot like hammer. [17]

HOV lanes are not usually considered hammer lanes, but are also used for express travel by commuters.

Climbing lane

A sign directing slower traffic to remain in the right-hand lane. MUTCD R4-3.svg
A sign directing slower traffic to remain in the right-hand lane.

In hilly terrain, some highways have an additional "climbing lane" or "crawler lane" for the use of heavy or underpowered vehicles which climb hills more slowly than they traverse flat ground. For example, a highway with one travel lane in each direction would typically expand to two lanes for traffic proceeding uphill, retaining one lane for downhill traffic.

Australian use

In Australia, most intercity highways are constructed with only one lane in each direction. Head-on collisions are a risk, particularly with fatigued drivers. Overtaking lanes are an additional lane in one direction for a short distance (one or two kilometres) (1/2 Miles) to assist faster traffic to safely overtake slower traffic. Road markings are often painted so that the additional lane appears in the centre of the road (guiding traffic to the left), and traffic needs to deliberately change lanes to overtake. At the end, the markings are the other way, so that the left lane must yield and merge into the overtaking lane. Large signs alert drivers that they are approaching an overtaking lane, often at 5 km (3 Miles) and 1 km (0.62 Mi) distances before the lane starts.

Cultural references

Related Research Articles

<span class="mw-page-title-main">Traffic</span> Phenomenon of movement by humans on foot or using vehicles

Traffic comprises pedestrians, vehicles, ridden or herded animals, trains, and other conveyances that use public ways (roads/sidewalks) for travel and transportation.

<span class="mw-page-title-main">Dual carriageway</span> Type of road

A dual carriageway (BrE) or a divided highway (AmE) is a class of highway with carriageways for traffic travelling in opposite directions separated by a central reservation (BrE) or median (AmE). Roads with two or more carriageways which are designed to higher standards with controlled access are generally classed as motorways, freeways, etc., rather than dual carriageways.

<span class="mw-page-title-main">Lane</span> Part of a carriageway meant for a single line of vehicles

In road transport, a lane is part of a roadway that is designated to be used by a single line of vehicles to control and guide drivers and reduce traffic conflicts. Most public roads (highways) have at least two lanes, one for traffic in each direction, separated by lane markings. On multilane roadways and busier two-lane roads, lanes are designated with road surface markings. Major highways often have two multi-lane roadways separated by a median.

<span class="mw-page-title-main">Single-track road</span> One-lane road that permits two-way travel

A single-track road or one-lane road is a road that permits two-way travel but is not wide enough in most places to allow vehicles to pass one another. This kind of road is common in rural areas across the United Kingdom and elsewhere. To accommodate two-way traffic, many single-track roads, especially those officially designated as such, are provided with passing places or pullouts or turnouts, or simply wide spots in the road, which may be scarcely longer than a typical car using the road. The distance between passing places varies considerably, depending on the terrain and the volume of traffic on the road. The railway equivalents of passing places are passing loops.

<span class="mw-page-title-main">Bicycle law in California</span>

Bicycle law in California is the parts of the California Vehicle Code that set out the law for persons cycling in California, and a subset of bicycle law in the United States. In general, pretty much all the same rights and responsibilities that apply to car drivers apply to bicycle riders as well.

<span class="mw-page-title-main">Road surface marking</span> Any kind of device or material used on a road surface to convey official information

Road surface marking is any kind of device or material that is used on a road surface in order to convey official information; they are commonly placed with road marking machines. They can also be applied in other facilities used by vehicles to mark parking spaces or designate areas for other uses. In some countries and areas, road markings are conceived as horizontal traffic signs, as opposed to vertical traffic signs placed on posts.

<span class="mw-page-title-main">Vehicular cycling</span> Practice of riding bicycles on roads while obeying roadway rules

Vehicular cycling is the practice of riding bicycles on roads in a manner that is in accordance with the principles for driving in traffic, and in a way that places responsibility for safety on the individual.

<span class="mw-page-title-main">Overtaking</span> Vehicle-passing maneuver

Overtaking or passing is the act of one vehicle going past another slower moving vehicle, travelling in the same direction, on a road. The lane used for overtaking another vehicle is often a passing lane farther from the road shoulder, which is to the left in places that drive on the right and to the right in places that drive on the left.

In transportation engineering, traffic flow is the study of interactions between travellers and infrastructure, with the aim of understanding and developing an optimal transport network with efficient movement of traffic and minimal traffic congestion problems.

<span class="mw-page-title-main">School bus traffic stop laws</span>

School bus stop laws are laws dictating what a motorist must do in the vicinity of a bus stop being used by a school bus or other bus, coach or minibus providing school transport.

<span class="mw-page-title-main">2+1 road</span> Design of road

2+1 road is a specific category of three-lane road, consisting of two lanes in one direction and one lane in the other, alternating every few kilometres, and usually separated with a steel cable barrier. The second lane allows faster-moving traffic to overtake slower vehicles at regular intervals. Traditional roads of at least 10 metres (33 ft) width can be converted to 2+1 roads and reach near-motorway safety levels at a much lower cost than an actual conversion to motorway or dual carriageway.

For driving in the United States, each state and territory has its own traffic code or rules of the road, although most of the rules of the road are similar for the purpose of uniformity, given that all states grant reciprocal driving privileges to each other's licensed drivers. There is also a "Uniform Vehicle Code" which was proposed by a private, non-profit group, based upon input by its members. The UVC was not adopted in its entirety by any state. As with uniform acts in general, some states adopted selected sections as written or with modifications, while others created their own sui generis statutes touching upon the same subject matter. As required by the federal Highway Safety Act of 1966, all states and territories have adopted substantially similar standards for the vast majority of signs, signals, and road surface markings, based upon the Manual on Uniform Traffic Control Devices from the U.S. Department of Transportation. Many of the standard rules of the road involve consistent interpretation of the standard signs, signals, and markings such as what to do when approaching a stop sign, or the driving requirements imposed by a double yellow line on the street or highway. In order to implement their own traffic laws on the property of their own facilities, several federal agencies have also developed their own traffic laws.

Driving in the United Kingdom is governed by various legal powers and in some cases is subject to the passing of a driving test. The government produces a Highway Code that details the requirements for all road users, including drivers. Unlike most other countries in the world, UK traffic drives on the left.

<span class="mw-page-title-main">Driving in the United States</span>

86 percent of people in the United States use private automobiles as their primary form of transportation to their workplace.

<span class="mw-page-title-main">Road signs in the United States</span> Road and traffic signs utilized in the United States

In the United States, road signs are, for the most part, standardized by federal regulations, most notably in the Manual on Uniform Traffic Control Devices (MUTCD) and its companion volume the Standard Highway Signs (SHS).

<span class="mw-page-title-main">Road signs in China</span> Variety of road signs are displayed in the Peoples Republic of China

A wide variety of road signs are displayed in the People's Republic of China.

<span class="mw-page-title-main">Glossary of road transport terms</span>

Terminology related to road transport—the transport of passengers or goods on paved routes between places—is diverse, with variation between dialects of English. There may also be regional differences within a single country, and some terms differ based on the side of the road traffic drives on. This glossary is an alphabetical listing of road transport terms.

<span class="mw-page-title-main">Managed lane</span>

A managed lane is a type of highway lane that is operated with a management scheme, such as lane use restrictions or variable tolling, to optimize traffic flow, vehicle throughput, or both. Definitions and goals vary among transport agencies, but managed lanes are generally implemented to achieve an improved operational condition on a highway, such as improving traffic speed and throughput, reducing air pollution, and improving safety. Types of managed lanes include high-occupancy vehicle (HOV) lanes, high-occupancy toll lanes, express toll lanes, reversible lanes, and bus lanes. Most managed lane facilities are located in the United States and Canada, although HOV and bus lanes can be found in many other countries; outside of the US and Canada, many countries use active traffic management that manage all lanes of a highway.

<span class="mw-page-title-main">Yellow line (road marking)</span> Type of road marking

Yellow lines are road markings used in various territories.

<span class="mw-page-title-main">Road signs in Georgia</span>

Road signs in Georgia are similar to the road sign system of other post-Soviet states that ensure that transport vehicles move safely and orderly, as well as to inform the participants of traffic built-in graphic icons. However, some road signs look a bit different from Soviet ones and closer to the European ones. These icons are governed by the Vienna Convention on Road Traffic and Vienna Convention on Road Signs and Signals.

References

  1. Archived September 29, 2007, at the Wayback Machine
  2. "Title 29-A, §2052: Divided highways". www.mainelegislature.org. Retrieved 2018-09-23.
  3. "General Law - Part I, Title XIV, Chapter 89, Section 4B". malegislature.gov. Retrieved 2018-09-23.
  4. "304.015" . Retrieved 2018-09-23.
  5. "61-8-321. Drive on right side of roadway -- exceptions, MCA". leg.mt.gov. Retrieved 2018-09-23.
  6. "2013 New Jersey Revised Statutes :: Title 39 - MOTOR VEHICLES AND TRAFFIC REGULATION :: Section 39:4-88 - Traffic on marked lanes". Justia Law. Retrieved 2018-09-23.
  7. "Chapter 46.61 RCW: RULES OF THE ROAD". apps.leg.wa.gov. Retrieved 2018-09-23.
  8. "General Laws". malegislature.gov.
  9. New Jersey Permanent Statutes Database
  10. Illinois Compiled Statutes
  11. "Title 75". The official website for the Pennsylvania General Assembly.
  12. 1 2 "State "keep right" laws". mit.edu.
  13. "State "keep right" laws". www.mit.edu. Retrieved 2019-08-24.
  14. You can drive on the left lane as long as you go fast Alberta, Canada Government - Road Signs (Slower Traffic Keep Right)
  15. AASHTO Subcommittee on Traffic Engineering: Passing Lane Study Archived 2006-08-18 at the Wayback Machine
  16. Tchir, Jason (12 June 2012). "Left lane etiquette and tailgating consequences - The Globe and Mail". The Globe and Mail.
  17. "Trucker Talk - Common Logistics Phrases And Slang Terms". 2023-04-14.