A Kassel kerb is a design of kerb (curb in US English) that features a concave-section that allows for an easier alignment for buses. The kerb was first introduced in the German city of Kassel for the low-floor tram system but has since been adopted for use at traffic stops. [1] [2] Kassel kerbs can be part of a bus stop kerb, designed for low-floor buses that serve an elevated bus stop platform.
The invention of special kerbs for low-floor buses is connected with the introduction of low-floor buses and modern low-floor trams in the late 20th century. The German NEOPLAN Bus GmbH had designed the first bus with a "low-entry section" in 1976 but it was not accepted well in the market.
Since the 1980s, the Association of German Transport Companies invested into the design for a new standard bus, the " Standard-Linienbus II ", with the second-generation Neoplan N 416 from 1982 to find wider acceptance.
Shortly later, MAN's competitor Daimler was designing the Mercedes-Benz O405 in 1984 to fit with the new Standard-Bus requirements, and this model spread quickly in the market in the late 1980s.
Based on the Standard-Bus model, a number of variants were developed by their respective manufacturers – here, it was the Kässbohrer Setra S 300 NC to show the first a low-floor version in 1987 that was sold since 1989.
Daimler began to derive the low-floor version of its successful model in its Mercedes-Benz O 405 N, that was produced since late 1989, and which proved to be of a robust design in the following years, leading into rising production numbers. Consequently, Neoplan again developed low-floor versions of their Standard-Buses, named Neoplan N4014, N4015, N4016 NF with production starting in 1990.
With more low-floor buses being introduced to public transport in Germany in the late 1980s, it sparked ideas to optimize accessibility. The introduction of low-floor buses had reduced the number of steps from two or three to one, but the remaining step was a barrier to wheelchairs. A simple elevation of the bus platform is not enough, as there is often a gap too wide for wheels to traverse.
The parallel introduction of low-floor trams showed, that with proper horizontal alignment, the gap can be small enough to be barrier-free. After the first low floor trams in Geneva of 1987, the city of Bremen asked MAN to develop a low floor tram. The resulting prototypes of ADtranz GT6N were delivered in 1990 and mass production started in 1992 with the first batches entering service in Berlin, Bremen and Munich in the following years. The experiences with that first generation sparked interest to take further advantage of the low floor designs.
The introduction of barrier-free concepts into bus transport systems in the 1990s was successful up to the point, that the German transport companies stopped ordering high-floor designs by 1998 and eventually MAN and Daimler stopped producing high-floor city buses in Europe by 2001—public (city) transport companies no longer wanted such designs.
While the first special bus stop kerbs were using the Kassel Sonderbord, other kerb manufacturers followed the model by offering kerbs that optimize vertical and horizontal alignment for low-floor buses.
In 1996, the DIN, the German Institute for Standardization, issued the DIN 18024 part 1 ("Barrierefreies Bauen – Teil 1: Straßen, Plätze, Wege, öffentliche Verkehrs- und Grünanlagen sowie Spielplätze; Planungsgrundlagen" / Barrier-Free Design – Part 1: Streets, Places, Roads and Recreational Areas; Planning Basics), updated in 1998. Kassel had been at the forefront, performing tests with low-floor buses as early as 1992. [3] A simple increment on the bus platform height showed problems with wear on the bus tyres, and the planning department of the Kassel public transport company began to assemble ideas on a "special curb" ("Sonderbord") for their bus stops in 1994. [3] A manufacturer was found in Fröhlich Bau AG in Gensungen south of Kassel with their patent kerb (EP0544202/1993). [4] [5] After its termination manufacturing was taken over by Profilbeton GmbH in Borken, Hesse (also south of Kassel). By 2001 about 16% of bus stops in Kassel had been converted to "Kasseler Sonderbord". [5]
The kerb guides the tyre of the stopping bus, improving the alignment of the doors with the kerb and slightly raised boarding platform. As the tyre rides up the concave surface, gravity pulls it back down and steers the bus into alignment. [2]
The kerb has become a common part of contemporary bus stop design, and the provisions of DIN 18024-1 were proposed in 2010 to become a section of DIN 18070 („Öffentlicher Verkehrs- und Freiraum“, or Public Transport and Open Spaces).
The "Dresdner Combibord" kerb is a parallel development, derived from the elevated sidewalks used for low-floor trams in Dresden, Germany. Its development started during the introduction of the first low-floor trams (mode Gelenktriebwagen NGT6DD during 1995–1998) and the Combibord patent was granted in July 1997 (DE 19730055). [6] The round section allows buses to align to the tram platform in a similar way as the trams for level entry.
The Dresden public transport company gives the following reference data: [7]
The original Kassel kerb had been designed for a height of 16 cm above street surface. It did follow the assumption that a higher kerb could lead to collisions of the bus with it. Additionally it was expected that outward-opening swing doors could be damaged. However the remaining gap turned out to be an obstacle for disabled persons on wheels that required often to ask for help / the usage of a ramp enabled by the bus driver.
The United Nations Convention on the Rights of Persons with Disabilities was enacted in 2009 in Germany which led to a reevaluation of the bus kerbs. The original manufacturer Profilbeton GmbH derived the "Sonderboard Plus" designed for a height of 22 cm above street surface. The Hamburger Verkehrsverbund GmbH did build a test station in 2013 featuring a full-length of 39.75 m. It did include an approach section of 8 m length which had a 16 cm kerb after 1.5 m. This was followed by a 14 m section for the loading area having a 22 cm kerb. During a number of simulations it could be shown that damages are possible but they are avoidable. (When the approach was in the 16 cm area or when a steep approach is needed then no problems occur with cautious braking avoiding rolling movements of the bus body). Only a departure steering hard left could make the rear to touch the kerb. As a result, the Sonderbord Plus came into regular use in Kassel and Hamburg, and Berlin took it over in 2018 for new bus stops. [8]
New tram generations like Flexity Wien and second generation Flexity Berlin are lowering the entry level height matching with Combiboard kerbs just above 200 mm. The nominal remaining gap shall be kept below 30 mm vertically for them. [11]
A trolleybus is an electric bus that draws power from dual overhead wires using spring-loaded trolley poles. Two wires, and two trolley poles, are required to complete the electrical circuit. This differs from a tram or streetcar, which normally uses the track as the return path, needing only one wire and one pole. They are also distinct from other kinds of electric buses, which usually rely on batteries. Power is most commonly supplied as 600-volt direct current, but there are exceptions.
Neoplan Bus GmbH is a German automotive company that manufactures buses, trolleybuses and coaches. Since 2001, it has been a subsidiary of MAN Truck & Bus SE.
Solaris Bus & Coach sp z o.o. is a Polish manufacturer of public transport vehicles, with its headquarters in Bolechowo-Osiedle near Poznań. It is a subsidiary of Spanish rolling stock manufacturer CAF with a market share for electric buses in Europe of about 18%.
Dresden Airport is the international airport of Dresden, the state capital of Saxony, Germany. It is located in Klotzsche, a district of Dresden 9 km (5.6 mi) north of the city centre. It was formerly also known in German as Flughafen Dresden-Klotzsche. Destinations from the airport include a few European cities and several holiday destinations.
A low-floor tram is a tram that has no stairsteps between one or more entrances and part or all of the passenger cabin. The low-floor design improves the accessibility of the tram for the public, and also may provide larger windows and more airspace.
Guided buses are buses capable of being steered by external means, usually on a dedicated track or roll way that excludes other traffic, permitting the maintenance of schedules even during rush hours. Unlike railbus, trolleybuses or rubber-tyred trams, for part of their routes guided buses are able to share road space with general traffic along conventional roads, or with conventional buses on standard bus lanes.
The Bombardier Flexity Classic is a model of light-rail tram manufactured by Bombardier Transportation. Although it is marketed as the most traditionally designed member of the Flexity family, it is still a modern bi-directional articulated tram with a low-floor section allowing good accessibility, especially to passengers in wheelchairs. Flexity Classic trams run on 1,435 mmstandard gauge in Australia, 1,000 mmmetre gauge in Essen, 1,450 mm in Dresden, and 1,458 mm in Leipzig.
The Berliner Verkehrsbetriebe is the main public transport company of Berlin, the capital city of Germany. It manages the city's U-Bahn (underground), tram, bus and ferry networks, but not the S-Bahn urban rail system.
Transdev Germany is the largest private operator of passenger buses and trains in Germany. It is a subsidiary of Transdev.
Germany has an extensive number of tramway networks. Some of these networks have been upgraded to light rail standards, called Stadtbahn in German. Straßenbahn and Stadtbahn schemes are usually operated on the legal foundation of the BOStrab, the Tramways Act of Germany.
The Karlsruhe Stadtbahn is a German tram-train system combining tram lines in the city of Karlsruhe with railway lines in the surrounding countryside, serving the entire region of the middle upper Rhine valley and creating connections to neighbouring regions. The Stadtbahn combines an efficient urban railway in the city with an S-Bahn, overcoming the boundary between trams and trains. Its logo does not include the green and white S-Bahn symbol used in other German suburban rail systems and the symbol is only used at stops and stations outside the inner-city tram-operation area.
Railway platform height is the built height – above top of rail (ATR) – of passenger platforms at stations. A connected term is train floor height, which refers to the ATR height of the floor of rail vehicles. Worldwide, there are many, frequently incompatible, standards for platform heights and train floor heights. Where raised platforms are in use, train widths must also be compatible, in order to avoid both large gaps between platforms and trains and mechanical interference liable to cause equipment damage.
Deisenhofen is a Munich S-Bahn railway station in Deisenhofen, a district of Oberhaching.
Dresdner Verkehrsbetriebe AG (DVB) is the municipal transport company of the city of Dresden in Germany. It is a member of the Verkehrsverbund Oberelbe transport association that manages a common public transport structure for Dresden and its surrounding areas. The DVB operates the Dresden tram network comprising 12 tram lines, with a total line length of approximately 210 kilometres (130.5 mi) and a total route length of 132.7 kilometres (82.5 mi), and 28 bus lines, with a total line length of approximately 306 kilometres (190.1 mi). It is also responsible for two funicular railways and three ferries across the River Elbe.
The Dresden tramway network is a network of tramways forming the backbone of the public transport system in Dresden, a city in the federal state of Saxony, Germany. Opened in 1872, it has been operated since 1993 by Dresdner Verkehrsbetriebe (DVB), and is integrated in the Verkehrsverbund Oberelbe (VVO).
High-floor describes the interior flooring of commuter vehicles primarily used in public transport such as trains, light rail cars and other rail vehicles, along with buses and trolleybuses. Interior floor height is generally measured above the street surface or above the top of the rail. High-floor designs usually result from packaging requirements: mechanical items such as axles, motors, crankshafts, and/or transmissions, or luggage storage spaces are traditionally placed under the interior floor of these vehicles. The term is used in contrast with low-floor designs, which offer a decreased floor and entry height above the street surface. Since low-floor designs generally were developed after high-floor vehicles, the older high-floor design is sometimes also known as conventional or the “traditional” design.
The Kassel tramway network is a 93.3-kilometer (58.0 mi) network of tramways, forming part of the public transport system in Kassel, a city in the north of the federal state of Hesse, Germany. As of 2014, the Kassel tram network is made up of seven regular tramlines.
The Alstom Flexity is a family of trams, streetcars and light rail vehicles manufactured by Bombardier Transportation, since 2021 a division of French company Alstom. As of 2015, more than 3,500 Flexity vehicles are in operation around the world in Europe, Asia, Oceania, and North America in 100 cities among 20 countries internationally. Production of the vehicles is done at Bombardier's global production plants and by local manufacturers worldwide through technology transfer agreements.
The VöV-Standard-Bus is a standard for transit buses in Germany based on requirements by the VöV Association of German Transport Companies. The first concept was named Standard-Linienbus which resulted in multiple variants of VöV-Buses. The first generation was conceived in 1968 being in production to the mid 1980s when it was replaced by the second generation Standard-Linienbus II being in production up to 2000.
The Nordhessischer Verkehrsverbund (NVV) is a transport association that organises the cooperation of more than 40 North Hessian transport companies, such as supra-regional public transport and regional rail passenger transport. The Verkehrsverbund und Fördergesellschaft Nordhessen mbH is responsible for this.
Priorität: 14.07.1997 DE 19730055
