Single-track road

Last updated August 20, 2024

A single-track road or one-lane road is a road that permits two-way travel but is not wide enough in most places to allow vehicles to pass one another (although sometimes two compact cars can pass). This kind of road is common in rural areas across the United Kingdom and elsewhere. To accommodate two-way traffic, many single-track roads, especially those officially designated as such, are provided with passing places (United Kingdom) or pullouts or turnouts (United States), or simply wide spots in the road, which may be scarcely longer than a typical car using the road. The distance between passing places varies considerably, depending on the terrain and the volume of traffic on the road. The railway equivalents of passing places are passing loops.

In Scotland

The term is widely used in Scotland, particularly the Highlands, to describe such roads. Passing places are generally marked with a diamond-shaped white sign with the words "passing place" on it. New signs tend to be square rather than diamond-shaped, as diamond signs are also used for instructions to tram drivers in cities. On some roads, especially in Argyll and Bute, passing places are marked with black-and-white-striped posts. Signs remind drivers of slower vehicles to pull over into a passing place (or opposite it, if it is on the opposite side of the road) to let following vehicles pass, and most drivers oblige. The same system is found very occasionally in rural England and Wales, as well as Sai Kung District in the New Territories. Sometimes two small vehicles can pass one another at a place other than a designated passing place.

Some A-class and B-class roads in the Highlands are still single-track, although many sections have been widened for the sake of faster travel. In 2009, the A830 "Road to the Isles" and A851 on the Isle of Skye have had their single-track sections replaced with higher-quality single-carriageway road.^[1]

In mountains

In remote backcountry areas around the world, particularly in mountains, many roads are single-track and unmarked. These include many U.S. Forest Service and logging roads in the United States. In Peru, the second of two overland transportation routes between Cuzco and Madre de Dios Region, a 300 km heavy-truck route, is a single-track road of gravel and dirt.

When practical, it is usually considered better for the vehicle going downhill to yield the right of way by stopping at a wide spot. The reason seems to be that it may be harder for the vehicle going up to get started again. At least in California, it is also the vehicle going downhill that must back up, if it is too late to stop at a wide spot.

Types

Chicanes

Chicanes are often placed on residential streets as a more aesthetic means to slow down cars.

One-lane passages

Sometimes, for budget reasons, and where traffic is fairly low, bridges exist as single-track corridors. Tunnels in remote areas can also be one lane when the tunnel is short and traffic is low, when building a hill or blasting away the mountain is too cost-prohibitive.

One-way single-track roads

Single-track roads also exist as one-way stretches. Exit and entrance ramps for freeways and motorways are among common examples of one-way single-track roads.

Private single-track roads

The most common example of private single-track roads are long driveways of rural properties such as country houses and farm property.

Ice roads

The mountain passes on the Dalton Highway in Alaska have a rule where goods-carrying northbound truck traffic has the right of way, while returning southbound traffic has to stop, as mentioned on Ice Road Truckers . The reason behind this procedure is that traffic going north is in somewhat of a hurry to deliver equipment to Deadhorse, Prudhoe Bay, and the drill site over the frozen Arctic Ocean.

Temporary one-lane restrictions

When reconstruction is being done on two-lane highways where traffic is moderately heavy, a worker will often stand at each end of the construction zone, holding a sign with "SLOW" or "GO" written on one side and "STOP" on the reverse. The workers, who communicate through yelling, hand gestures, or radio, will periodically reverse their signs to allow time for traffic to flow in each direction. A modification of this for roadways that have heavier traffic volumes is to maintain one direction on the existing roadway, and detour the other, thus not requiring the use of flaggers. An example of this is the M-89 reconstruction project in Plainwell, Michigan, where westbound traffic is detoured via county roads around town.^[2]^{[ dead link ]}

User etiquette

If lines of sight are long, and both drivers are familiar with the road, vehicles heading towards each other can adjust their speed so as to arrive at a wide spot at the same time and pass slowly, avoiding the need for either vehicle to stop.

When two vehicles meet head-on, generally the drivers confer to decide in which direction lies the closest wide spot, and together they travel there, the lead vehicle necessarily in reverse gear.

In the Scottish Highlands, most drivers are accustomed to single-track roads. When opposing traffic is encountered, the first driver to reach the nearest passing place pulls over, no matter which side, and flashes the headlights to signal the other car to proceed forward. It is customary for both drivers then to acknowledge each other with a wave as they pass. At night, both drivers acknowledge each other by flashing their off-side direction indicators headlights immediately before or as they pass. It is extremely dangerous to flash headlights at close proximity on narrow unlit country roads at night, as this affects drivers' night vision.

Usually when there is a brief one-lane bottleneck in a two-lane road, which may happen in many areas, traffic will usually yield to oncoming traffic already in the bottleneck. One-lane single-track roads usually have no conflict.

In the United States, if the situation permits, both vehicles will pull off the road slightly and pass in this manner. Although saving time, this process can cause ruts and erosion along the edge of the road. For this reason, single track roads are generally used in places with very low traffic volumes, though one-lane stop-gap measures will have a sign that says "STOP" on one side of the sign and "SLOW" on the other side of the sign, which construction workers flip.

If there are no passing places or wide parts of the road then the start of the road is considered as the passing place.

Related Research Articles

Traffic comprises pedestrians, vehicles, ridden or herded animals, trains, and other conveyances that use public ways (roads/sidewalks) for travel and transportation.

Traffic lights, traffic signals, or stoplights – also known as robots in South Africa and Namibia – are signaling devices positioned at road intersections, pedestrian crossings, and other locations in order to control the flow of traffic.

In road transport, a lane is part of a roadway that is designated to be used by a single line of vehicles to control and guide drivers and reduce traffic conflicts. Most public roads (highways) have at least two lanes, one for traffic in each direction, separated by lane markings. On multilane roadways and busier two-lane roads, lanes are designated with road surface markings. Major highways often have two multi-lane roadways separated by a median.

<span class="mw-page-title-main">Passing lane</span> Lane on a multi-lane highway or motorway closest to the median of the road

A passing lane, overtaking lane is a lane on a multi-lane highway or motorway closest to the median of the road used for passing vehicles in other lanes. Countries with right-hand traffic put the passing lane on the left; those with left-hand traffic put the passing lane on the right. Motorways typically have passing lanes along their entire length, but other roads might only have passing lanes for certain segments, depending on design specifications typically related to available space, funding, and traffic levels. A 2+1 road alternates the passing lane between directions every few kilometers/miles.

<span class="mw-page-title-main">Overtaking</span> Vehicle-passing maneuver

Overtaking or passing is the act of one vehicle going past another slower moving vehicle, travelling in the same direction, on a road. The lane used for overtaking another vehicle is often a passing lane farther from the road shoulder, which is to the left in places that drive on the right and to the right in places that drive on the left.

<span class="mw-page-title-main">Automotive lighting</span> Lighting system of a motor vehicle

A motor vehicle has lighting and signaling devices mounted to or integrated into its front, rear, sides, and, in some cases, top. Various devices have the dual function of illuminating the road ahead for the driver, and making the vehicle visible to others, with indications to them of turning, slowing or stopping, etc., with lights also indicating the size of some large vehicles.

<span class="mw-page-title-main">Road signs in the United Kingdom</span> Overview of road signs in the United Kingdom

Road signs in the United Kingdom and in its associated Crown dependencies and overseas territories conform broadly to European design norms, though a number of signs are unique: direction signs omit European route numbers, and road signs generally use the metric system of units which is kilometers and are generally used as distance indicators in the UK. Signs in Wales and parts of Scotland are bilingual.

Road signs in Sweden are regulated in Vägmärkesförordningen, VMF (2007:90), and are to be placed 2 metres from the road with the sign 1.6 m from the base for motorized roads. Except for route numbers, there are a maximum of three signs on a pole, with the most important sign at the top. All signs have a reflective layer added on selected parts of the sign as is custom in European countries; most larger signs also have their own illumination.

Road signs in Singapore closely follow those laid down in the traffic sign regulations used in the United Kingdom, although a number of changes over the years have introduced some slight deviations that suit local road conditions. Road signs in Singapore conform to the local Highway Code under the authority of Singapore Traffic Police.

Road signs in Norway are regulated by the Norwegian Public Roads Administration, Statens vegvesen in conformity with the 1968 Vienna Convention on Road Signs and Signals, to which Norway is a signatory.

In the United States, road signs are, for the most part, standardized by federal regulations, most notably in the Manual on Uniform Traffic Control Devices (MUTCD) and its companion volume the Standard Highway Signs (SHS).

Headlight flashing is the act of either briefly switching on the headlights of a car, or of momentarily switching between a headlight's high beams and low beams, in an effort to communicate with another driver or drivers. The signal is sometimes referred to in car manufacturers' manuals as an optical horn, since it draws the attention of other drivers.

The road signs of the Kingdom of the Netherlands, as well as Suriname, are regulated in the Reglement verkeersregels en verkeerstekens 1990, commonly abbreviated as RVV 1990. While most previous signage, from the RVV 1966 (Dutch) remained legal and official, they have been updated / replaced. Some aren't official anymore and have lost legal validity, but most surviving old signs remained valid.

Road signs in Finland were formerly regulated in Tieliikenneasetus (5.3.1982/182), but now are currently regulated in Siirtymäsäännökset (8.5.2020/360).

Road signs in the Czech Republic are regulated by the Ministry of Transport and the police. The signs are nearly the same as the European norm, but with small changes. The law governing the road signs is Decree number 30/2001 Sb., many times amended, and replaced by decree 294/2015 Sb., in force since 1 January 2016.

Road signs in Hong Kong are standardised by the Transport Department. Due to being a former British territory, the road signage in Hong Kong is similar to road signs in the United Kingdom, with the addition of Traditional Chinese characters.

Terminology related to road transport—the transport of passengers or goods on paved routes between places—is diverse, with variation between dialects of English. There may also be regional differences within a single country, and some terms differ based on the side of the road traffic drives on. This glossary is an alphabetical listing of road transport terms.

Yellow lines are road markings used in various territories.

Road signs in Bangladesh are similar to those used in some parts of the United Kingdom, except that they are multilingual.

Road signs in South Africa are based on the SADC-Road Traffic Sign Manual, a document designed to harmonise traffic signs in member states of the Southern Africa Development Community. Most of these signs were in the preceding South African RTSM.

References

↑ "Road to Isles". Transport Scotland. Retrieved 28 July 2014.
↑ http://www.plainwell.org/projects/index.php ^{[ bare URL ]}

External links

Guide to single track roads in Scotland

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "Road to Isles". Transport Scotland. Retrieved 28 July 2014.

[2] ttp://www.plainwell.org/projects/index.php ^{[ bare URL ]}

[1]

[2]