Ptolemy's inequality

Last updated
Four points and their six distances. The points are not co-circular, so Ptolemy's inequality is strict for these points. Ptolemy Inequality.svg
Four points and their six distances. The points are not co-circular, so Ptolemy's inequality is strict for these points.

In Euclidean geometry, Ptolemy's inequality relates the six distances determined by four points in the plane or in a higher-dimensional space. It states that, for any four points A, B, C, and D, the following inequality holds:

Contents

It is named after the Greek astronomer and mathematician Ptolemy.

The four points can be ordered in any of three distinct ways (counting reversals as not distinct) to form three different quadrilaterals, for each of which the sum of the products of opposite sides is at least as large as the product of the diagonals. Thus, the three product terms in the inequality can be additively permuted to put any one of them on the right side of the inequality, so the three products of opposite sides or of diagonals of any one of the quadrilaterals must obey the triangle inequality. [1]

As a special case, Ptolemy's theorem states that the inequality becomes an equality when the four points lie in cyclic order on a circle. The other case of equality occurs when the four points are collinear in order. The inequality does not generalize from Euclidean spaces to arbitrary metric spaces. The spaces where it remains valid are called the Ptolemaic spaces; they include the inner product spaces, Hadamard spaces, and shortest path distances on Ptolemaic graphs.

Assumptions and derivation

Ptolemy's inequality is often stated for a special case, in which the four points are the vertices of a convex quadrilateral, given in cyclic order. [2] [3] However, the theorem applies more generally to any four points; it is not required that the quadrilateral they form be convex, simple, or even planar.

For points in the plane, Ptolemy's inequality can be derived from the triangle inequality by an inversion centered at one of the four points. [4] [5] Alternatively, it can be derived by interpreting the four points as complex numbers, using the complex number identity:

to construct a triangle whose side lengths are the products of sides of the given quadrilateral, and applying the triangle inequality to this triangle. [6] One can also view the points as belonging to the complex projective line, express the inequality in the form that the absolute values of two cross-ratios of the points sum to at least one, and deduce this from the fact that the cross-ratios themselves add to exactly one. [7]

A proof of the inequality for points in three-dimensional space can be reduced to the planar case, by observing that for any non-planar quadrilateral, it is possible to rotate one of the points around the diagonal until the quadrilateral becomes planar, increasing the other diagonal's length and keeping the other five distances constant. [6] In spaces of higher dimension than three, any four points lie in a three-dimensional subspace, and the same three-dimensional proof can be used.

Four concyclic points

For four points in order around a circle, Ptolemy's inequality becomes an equality, known as Ptolemy's theorem:

In the inversion-based proof of Ptolemy's inequality, transforming four co-circular points by an inversion centered at one of them causes the other three to become collinear, so the triangle equality for these three points (from which Ptolemy's inequality may be derived) also becomes an equality. [5] For any other four points, Ptolemy's inequality is strict.

In three dimensions

Four non-coplanar points A, B, C, and D in 3D form a tetrahedron. In this case, the strict inequality holds: . [8]

In general metric spaces

A cycle graph in which the distances disobey Ptolemy's inequality Circle graph C4.svg
A cycle graph in which the distances disobey Ptolemy's inequality

Ptolemy's inequality holds more generally in any inner product space, [1] [9] and whenever it is true for a real normed vector space, that space must be an inner product space. [9] [10]

For other types of metric space, the inequality may or may not be valid. A space in which it holds is called Ptolemaic. For instance, consider the four-vertex cycle graph, shown in the figure, with all edge lengths equal to 1. The sum of the products of opposite sides is 2. However, diagonally opposite vertices are at distance 2 from each other, so the product of the diagonals is 4, bigger than the sum of products of sides. Therefore, the shortest path distances in this graph are not Ptolemaic. The graphs in which the distances obey Ptolemy's inequality are called the Ptolemaic graphs and have a restricted structure compared to arbitrary graphs; in particular, they disallow induced cycles of length greater than three, such as the one shown. [11]

The Ptolemaic spaces include all CAT(0) spaces and in particular all Hadamard spaces. If a complete Riemannian manifold is Ptolemaic, it is necessarily a Hadamard space. [12]

Inner product spaces

Suppose that is a norm on a vector space Then this norm satisfies Ptolemy's inequality: if and only if there exists an inner product on such that for all vectors [13] Another necessary and sufficient condition for there to exist such an inner product is for the norm to satisfy the parallelogram law: If this is the case then this inner product will be unique and it can be defined in terms of the norm by using the polarization identity.

See also

Related Research Articles

<span class="mw-page-title-main">Absolute value</span> Distance from zero to a number

In mathematics, the absolute value or modulus of a real number , denoted , is the non-negative value of without regard to its sign. Namely, if is a positive number, and if is negative, and . For example, the absolute value of 3 is 3, and the absolute value of −3 is also 3. The absolute value of a number may be thought of as its distance from zero.

<span class="mw-page-title-main">Inner product space</span> Generalization of the dot product; used to define Hilbert spaces

In mathematics, an inner product space is a real vector space or a complex vector space with an operation called an inner product. The inner product of two vectors in the space is a scalar, often denoted with angle brackets such as in . Inner products allow formal definitions of intuitive geometric notions, such as lengths, angles, and orthogonality of vectors. Inner product spaces generalize Euclidean vector spaces, in which the inner product is the dot product or scalar product of Cartesian coordinates. Inner product spaces of infinite dimension are widely used in functional analysis. Inner product spaces over the field of complex numbers are sometimes referred to as unitary spaces. The first usage of the concept of a vector space with an inner product is due to Giuseppe Peano, in 1898.

<span class="mw-page-title-main">Quadrilateral</span> Polygon with four sides and four corners

In geometry a quadrilateral is a four-sided polygon, having four edges (sides) and four corners (vertices). The word is derived from the Latin words quadri, a variant of four, and latus, meaning "side". It is also called a tetragon, derived from Greek "tetra" meaning "four" and "gon" meaning "corner" or "angle", in analogy to other polygons. Since "gon" means "angle", it is analogously called a quadrangle, or 4-angle. A quadrilateral with vertices , , and is sometimes denoted as .

The Riesz representation theorem, sometimes called the Riesz–Fréchet representation theorem after Frigyes Riesz and Maurice René Fréchet, establishes an important connection between a Hilbert space and its continuous dual space. If the underlying field is the real numbers, the two are isometrically isomorphic; if the underlying field is the complex numbers, the two are isometrically anti-isomorphic. The (anti-) isomorphism is a particular natural isomorphism.

The Cauchy–Schwarz inequality is an upper bound on the inner product between two vectors in an inner product space in terms of the product of the vector norms. It is considered one of the most important and widely used inequalities in mathematics.

<span class="mw-page-title-main">Triangle inequality</span> Property of geometry, also used to generalize the notion of "distance" in metric spaces

In mathematics, the triangle inequality states that for any triangle, the sum of the lengths of any two sides must be greater than or equal to the length of the remaining side. This statement permits the inclusion of degenerate triangles, but some authors, especially those writing about elementary geometry, will exclude this possibility, thus leaving out the possibility of equality. If a, b, and c are the lengths of the sides of a triangle then the triangle inequality states that

<span class="mw-page-title-main">Perpendicular</span> Relationship between two lines that meet at a right angle (90 degrees)

In geometry, two geometric objects are perpendicular if their intersection forms right angles at the point of intersection called a foot. The condition of perpendicularity may be represented graphically using the perpendicular symbol, ⟂. Perpendicular intersections can happen between two lines, between a line and a plane, and between two planes.

In mathematics, the dot product or scalar product is an algebraic operation that takes two equal-length sequences of numbers, and returns a single number. In Euclidean geometry, the dot product of the Cartesian coordinates of two vectors is widely used. It is often called the inner product of Euclidean space, even though it is not the only inner product that can be defined on Euclidean space.

<span class="mw-page-title-main">Parallelogram law</span> Sum of the squares of all 4 sides of a parallelogram equals that of the 2 diagonals

In mathematics, the simplest form of the parallelogram law belongs to elementary geometry. It states that the sum of the squares of the lengths of the four sides of a parallelogram equals the sum of the squares of the lengths of the two diagonals. We use these notations for the sides: AB, BC, CD, DA. But since in Euclidean geometry a parallelogram necessarily has opposite sides equal, that is, AB = CD and BC = DA, the law can be stated as

<span class="mw-page-title-main">Concyclic points</span> Points on a common circle

In geometry, a set of points are said to be concyclic if they lie on a common circle. A polygon whose vertices are concyclic is called a cyclic polygon, and the circle is called its circumscribing circle or circumcircle. All concyclic points are equidistant from the center of the circle.

In mathematics, a norm is a function from a real or complex vector space to the non-negative real numbers that behaves in certain ways like the distance from the origin: it commutes with scaling, obeys a form of the triangle inequality, and is zero only at the origin. In particular, the Euclidean distance in a Euclidean space is defined by a norm on the associated Euclidean vector space, called the Euclidean norm, the 2-norm, or, sometimes, the magnitude or length of the vector. This norm can be defined as the square root of the inner product of a vector with itself.

<span class="mw-page-title-main">Ptolemy's theorem</span> Relates the 4 sides and 2 diagonals of a quadrilateral with vertices on a common circle

In Euclidean geometry, Ptolemy's theorem is a relation between the four sides and two diagonals of a cyclic quadrilateral. The theorem is named after the Greek astronomer and mathematician Ptolemy. Ptolemy used the theorem as an aid to creating his table of chords, a trigonometric table that he applied to astronomy.

<span class="mw-page-title-main">Polarization identity</span> Formula relating the norm and the inner product in a inner product space

In linear algebra, a branch of mathematics, the polarization identity is any one of a family of formulas that express the inner product of two vectors in terms of the norm of a normed vector space. If a norm arises from an inner product then the polarization identity can be used to express this inner product entirely in terms of the norm. The polarization identity shows that a norm can arise from at most one inner product; however, there exist norms that do not arise from any inner product.

In geometry, collinearity of a set of points is the property of their lying on a single line. A set of points with this property is said to be collinear. In greater generality, the term has been used for aligned objects, that is, things being "in a line" or "in a row".

In functional analysis, the dual norm is a measure of size for a continuous linear function defined on a normed vector space.

<span class="mw-page-title-main">Hilbert space</span> Type of topological vector space

In mathematics, Hilbert spaces allow the methods of linear algebra and calculus to be generalized from (finite-dimensional) Euclidean vector spaces to spaces that may be infinite-dimensional. Hilbert spaces arise naturally and frequently in mathematics and physics, typically as function spaces. Formally, a Hilbert space is a vector space equipped with an inner product that induces a distance function for which the space is a complete metric space. A Hilbert space is a special case of a Banach space.

In mathematics, a line integral is an integral where the function to be integrated is evaluated along a curve. The terms path integral, curve integral, and curvilinear integral are also used; contour integral is used as well, although that is typically reserved for line integrals in the complex plane.

<span class="mw-page-title-main">Bicentric quadrilateral</span> Convex, 4-sided shape with an incircle and a circumcircle

In Euclidean geometry, a bicentric quadrilateral is a convex quadrilateral that has both an incircle and a circumcircle. The radii and centers of these circles are called inradius and circumradius, and incenter and circumcenter respectively. From the definition it follows that bicentric quadrilaterals have all the properties of both tangential quadrilaterals and cyclic quadrilaterals. Other names for these quadrilaterals are chord-tangent quadrilateral and inscribed and circumscribed quadrilateral. It has also rarely been called a double circle quadrilateral and double scribed quadrilateral.

<span class="mw-page-title-main">Pythagorean theorem</span> Relation between sides of a right triangle

In mathematics, the Pythagorean theorem or Pythagoras' theorem is a fundamental relation in Euclidean geometry between the three sides of a right triangle. It states that the area of the square whose side is the hypotenuse is equal to the sum of the areas of the squares on the other two sides.

In mathematics, there are two different notions of semi-inner-product. The first, and more common, is that of an inner product which is not required to be strictly positive. This article will deal with the second, called a L-semi-inner product or semi-inner product in the sense of Lumer, which is an inner product not required to be conjugate symmetric. It was formulated by Günter Lumer, for the purpose of extending Hilbert space type arguments to Banach spaces in functional analysis. Fundamental properties were later explored by Giles.

References

  1. 1 2 Schoenberg, I. J. (1940), "On metric arcs of vanishing Menger curvature", Annals of Mathematics, Second Series, 41 (4): 715–726, doi:10.2307/1968849, JSTOR   1968849, MR   0002903 .
  2. Steele, J. Michael (2004), "Exercise 4.6 (Ptolemy's Inequality)", The Cauchy-Schwarz Master Class: An Introduction to the Art of Mathematical Inequalities, MAA problem books, Cambridge University Press, p. 69, ISBN   9780521546775 .
  3. Alsina, Claudi; Nelsen, Roger B. (2009), "6.1 Ptolemy's inequality", When Less is More: Visualizing Basic Inequalities, Dolciani Mathematical Expositions, vol. 36, Mathematical Association of America, pp. 82–83, ISBN   9780883853429 .
  4. Apostol (1967) attributes the inversion-based proof to textbooks by R. A. Johnson (1929) and Howard Eves (1963).
  5. 1 2 Stankova, Zvezdelina; Rike, Tom, eds. (2008), "Problem 7 (Ptolemy's Inequality)", A Decade of the Berkeley Math Circle: The American Experience, MSRI Mathematical Circles Library, vol. 1, American Mathematical Society, p. 18, ISBN   9780821846834 .
  6. 1 2 Apostol 1967.
  7. Silvester, John R. (2001), "Proposition 9.10 (Ptolemy's theorem)", Geometry: Ancient and Modern, Oxford University Press, p. 229, ISBN   9780198508250 .
  8. Zhu, Hanlin (1984). "68.25 A Tetrahedron Inequality". The Mathematical Gazette. 68 (445): 200–202. doi:10.2307/3616345. ISSN   0025-5572. JSTOR   3616345.
  9. 1 2 Giles, J. R. (2000), "Exercise 12", Introduction to the Analysis of Normed Linear Spaces, Australian Mathematical Society lecture series, vol. 13, Cambridge University Press, p. 47, ISBN   9780521653756 .
  10. Schoenberg, I. J. (1952), "A remark on M. M. Day's characterization of inner-product spaces and a conjecture of L. M. Blumenthal", Proceedings of the American Mathematical Society, 3 (6): 961–964, doi:10.2307/2031742, JSTOR   2031742, MR   0052035 .
  11. Howorka, Edward (1981), "A characterization of Ptolemaic graphs", Journal of Graph Theory, 5 (3): 323–331, doi:10.1002/jgt.3190050314, MR   0625074 .
  12. Buckley, S. M.; Falk, K.; Wraith, D. J. (2009), "Ptolemaic spaces and CAT(0)", Glasgow Mathematical Journal, 51 (2): 301–314, doi: 10.1017/S0017089509004984 , MR   2500753 .
  13. Apostol, Tom M. (1967). "Ptolemy's Inequality and the Chordal Metric". Mathematics Magazine. 40 (5): 233–235. doi:10.2307/2688275. JSTOR   2688275. MR   0225213.