JJY

Last updated
Japan location map with side map of the Ryukyu Islands.svg
Blue pog.svg
Red pog.svg
Japan location map with side map of the Ryukyu Islands.svg
JJY's transmitters are located at the Otakadoyayama Transmitter (right dot) in Tamura City, Fukushima Prefecture, and the Haganeyama Transmitter (left dot) in Saga City, Saga Prefecture.

JJY is the call sign of a low frequency time signal radio station located in Japan.

Contents

The station broadcasts from two sites, one on Mount Otakadoya, near Fukushima, and the other on Mount Hagane, located on Kyushu island. JJY is operated by the National Institute of Information and Communications Technology (NICT), an independent administrative institution affiliated with the Ministry of Internal Affairs and Communications of the Japanese government.

Transmission sites

The Mount Otakadoya site ( 37°22′21″N140°50′56″E / 37.37250°N 140.84889°E / 37.37250; 140.84889 [1] ) is located at an elevation of 790 meters (2,590 ft) in Tamura City, Fukushima Prefecture. It broadcasts a 50 kW signal (13 kW ERP) on 40 kHz from an umbrella top-loading antenna situated 250 meters (820 ft) above the ground. In March 2011, it was powered down and evacuated due to its proximity to the Fukushima Daiichi nuclear disaster. [2] It resumed broadcasting on April 21, unattended by staff. It went off air again temporarily on April 25 due to lightning, but has ever since been on air.

The Mount Hagane site ( 33°27′56″N130°10′32″E / 33.46556°N 130.17556°E / 33.46556; 130.17556 [3] ) is located at an elevation of 900 meters (2,950 ft) in Saga City, Saga Prefecture. It broadcasts a 50 kW signal (23 kW ERP) on 60 kHz to avoid interfering with the Otakadoya site as their signals overlap. The antenna for the Hagane site is also an umbrella top loading antenna and is situated 200 meters (650 ft) above the ground. This site does not have a redundant 40 kHz transmitter, so cannot act as a fallback for the Mount Otakadoya site.

Time standards

Both carrier signals contain an identical pulse-width modulated time code and are transmitted 24 hours a day. Low frequency (LF) transmissions are used to enhance accuracy and reduce the possibility of atmospheric interference. The calculated accuracy of JJY's signal is 1×10−11.

Japan Standard Time is set by a caesium atomic clock in Tokyo. This information is sent to the transmitter stations and is used to set a caesium atomic clock at each station. These clocks are housed in an environmentally controlled and electromagnetically shielded room to prevent outside interference with the clocks.

The time code format is very similar to that of WWVB in the United States but technically is a variant of IRIG. Similarly to WWVB or MSF the signal of JJY is used to synchronize consumer radio-controlled clocks sold throughout Japan.

Transmission systems

Each station has an identical setup of equipment. A dual set of transmitters, a primary and a backup, provide for constant transmission of the time code. However, it is not possible given the current design configuration for one site to act as a lower power alternate frequency backup for the other. The backups are set to automatically take over in the event that the primary transmission system has a failure. The Time Signal Control Room generates the standard LF signal and time code that is broadcast.

The Impedance Matching Room has a matching transformer to perform impedance matching between the transmitter and the antenna. Due to the high power of radio frequency signals that pass through the room, it is completely shielded in copper and is off-limits during broadcasts.

History and former shortwave station

On January 30, 1940, the Communications Research Laboratory (the predecessor of NICT), began operations of JJY as a shortwave station, broadcasting at 4, 7, 9, and 13 MHz. Over the years, these were dropped and by the late 1950s, JJY was transmitting its time signal on standard frequencies of 2.5, 5, 8, 10, and 15 MHz. The 2.5 and 15 MHz broadcasts terminated in 1996. The time signals included announcements of the time, in both Morse code and by a female voice, before every tenth minute: for example, "JJY JJY 1630 JST" (the voice announcement of the time being in Japanese).

Experimental station JG2AS began broadcasting on January 10, 1966, providing digitally encoded time signals in the longwave band at 40 kHz. In 1997, the CRL, determining that the longwave time signal was more accurate when received, subject to less interference, and in wider use than the shortwave time signal, decided to construct a new longwave time station and gradually eliminate the shortwave broadcasts. The first official longwave station of JJY began broadcasting from Mount Otakadoya at 40 kHz on June 10, 1999, and the shortwave broadcasts finally ceased operation on March 31, 2001. On October 1, 2001, the 60 kHz longwave transmission from Mount Hagane began.

The Mount Otakadoya transmitter survived the 2011 Tōhoku earthquake and tsunami, but is 17 km [4] from the Fukushima I nuclear accidents, and was powered down when it was evacuated on March 12 (19:46 JST) [5] due to the 20 km radius evacuation order. It was re-enabled April 21. [6]

JJY Time Code

As with most longwave time code stations, the JJY signal is amplitude-modulated to send one bit per second, transmitting a complete time code every minute.

The time code is most similar to that transmitted by WWVB, but each bit is reversed: on the second, the carrier is increased to full power. Some time during the second (depending on the bit to be transmitted), the carrier is reduced by 10 dB, to 10% power, until the beginning of the next second.

Recorded signal for 2016-08-03 15:45 JST. Note the Morse code call sign ("JJY JJY") transmitted from 0:40 to 0:49.

There are three different signals that are sent each second:

As with WWVB, seconds 0, 9, 19, 29, 39, 49 and 59 of each minute are marker bits. The remaining 53 encode Japan Standard Time using binary-coded decimal. JST does not include summer time, but bits are reserved to handle it. Leap second warning bits are also provided, these announce leap seconds starting at the beginning of the UTC month (09:00 JST on the first day of the month), and ending with the leap second insertion (just after 08:59 JST on the first day of the following month).

The full-time code is as follows: [7] [8]

The first 35 seconds are identical to WWVB, but after that it diverges, including some parity and day-of-week bits not in WWVB, and omitting DUT1 information.

Bit

(Second)

WeightMeaningBit (Second)WeightMeaningBit (Second)WeightMeaning
:00MStart of minute marker bit:200Unused, always 0.:40SU2Currently unused, always 0.
(Future: summer time is in effect.)
:0140Minutes:210:4180Year
:0220:22200Day of year
1=January 1
365=December 31
366=December 31, leap year
:4240
:0310:23100:4320
:040:240:4410
:058:2580:458
:064:2640:464
:072:2720:472
:081:2810:481
:09P1Marker bit:29P3:49P5Marker bit
:100Unused, always 0.:308:504Day of week.
0=Sunday, 6=Saturday
:110:314:512
:1220Hours:322:521
:1310:331:53LS1Leap second at end of current UTC month.
:140:340Unused, always 0.:54LS2Leap second type: 1=added, 0=deleted.
:158:350:550Unused, always 0.
:164:36PA1 Even parity of hours bits (:12–:18).:560
:172:37PA2Even parity of minutes bits (:01–:08).:570
:181:38SU1Currently unused, always 0. (Future:
change to/from summer time within 6 days.)
:580
:19P2Marker bit:39P4Marker bit:59P0Marker bit.

P0 is always the last second of a minute. In the event of a leap second, an additional 0 bit is inserted before it, and the marker bit is transmitted during second 60. LS1 and LS2 are normally both 0. Both bits are set to announce an inserted leap second at the end of the current UTC month.

Twice per hour (minutes 15 and 45), the last 20 seconds of the time code are different. In lieu of the year bits, the station's call sign is broadcast in Morse code twice using on-off keying during seconds 40 through 48. Further, bits 50 through 55 are replaced by 6 status bits ST1 through ST6 which, if non-zero, indicate a scheduled service interruption:

Bit

(Second)

WeightMeaning
:39P4Marker bit
:40–:48Call sign announcement
:49P5Marker bit
:50ST1Service interruption scheduled
:51ST2
:52ST3
:53ST4Service interruption daytime only
:54ST5Service interruption duration
:55ST6
:560Unused, always 0.
:570
:580
:59P0Marker bit.

ST1 through ST3 indicate the time of the planned service interruption:

ST1ST2ST3Meaning
000No service interruption planned within 7 days.
001Service interruption planned within 7 days.
010Service interruption planned within 3–6 days.
011Service interruption planned within 2 days.
100Service interruption planned within 24 hours.
101Service interruption planned within 12 hours.
110Service interruption planned within 2 hours.

ST4, if set, promises the service interruption will be during daylight hours only. If unset, the interruption may be all day.

ST5 and ST6 indicate the duration of the interruption:

ST5ST6Meaning
00No service interruption planned.
01Interruption for 7 days or more, or unknown duration.
10Interruption for 2–6 days.
11Interruption less than 2 days.

If no interruption is planned, all ST bits are 0.

Related Research Articles

<span class="mw-page-title-main">Very low frequency</span> The range 3–30 kHz of the electromagnetic spectrum

Very low frequency or VLF is the ITU designation for radio frequencies (RF) in the range of 3–30 kHz, corresponding to wavelengths from 100 to 10 km, respectively. The band is also known as the myriameter band or myriameter wave as the wavelengths range from one to ten myriameters. Due to its limited bandwidth, audio (voice) transmission is highly impractical in this band, and therefore only low data rate coded signals are used. The VLF band is used for a few radio navigation services, government time radio stations and for secure military communication. Since VLF waves can penetrate at least 40 meters (131 ft) into saltwater, they are used for military communication with submarines.

Low frequency (LF) is the ITU designation for radio frequencies (RF) in the range of 30–300 kHz. Since its wavelengths range from 10–1 km, respectively, it is also known as the kilometre band or kilometre waves.

<span class="mw-page-title-main">Radio clock</span> Type of clock which self-synchronizes its time using dedicated radio transmitters

A radio clock or radio-controlled clock (RCC), and often colloquially referred to as an "atomic clock", is a type of quartz clock or watch that is automatically synchronized to a time code transmitted by a radio transmitter connected to a time standard such as an atomic clock. Such a clock may be synchronized to the time sent by a single transmitter, such as many national or regional time transmitters, or may use the multiple transmitters used by satellite navigation systems such as Global Positioning System. Such systems may be used to automatically set clocks or for any purpose where accurate time is needed. Radio clocks may include any feature available for a clock, such as alarm function, display of ambient temperature and humidity, broadcast radio reception, etc.

<span class="mw-page-title-main">Longwave</span> Radio transmission using wavelengths above 1000 m

In radio, longwave, long wave or long-wave, and commonly abbreviated LW, refers to parts of the radio spectrum with wavelengths longer than what was originally called the medium-wave broadcasting band. The term is historic, dating from the early 20th century, when the radio spectrum was considered to consist of longwave (LW), medium-wave (MW), and short-wave (SW) radio bands. Most modern radio systems and devices use wavelengths which would then have been considered 'ultra-short'.

<span class="mw-page-title-main">Digital Radio Mondiale</span> Digital radio broadcasting standard

Digital Radio Mondiale is a set of digital audio broadcasting technologies designed to work over the bands currently used for analogue radio broadcasting including AM broadcasting—particularly shortwave—and FM broadcasting. DRM is more spectrally efficient than AM and FM, allowing more stations, at higher quality, into a given amount of bandwidth, using xHE-AAC audio coding format. Various other MPEG-4 codecs and Opus are also compatible, but the standard now specifies xHE-AAC.

CHU is the call sign of a shortwave time signal radio station operated by the Institute for National Measurement Standards of the National Research Council. CHU's signal is used for continuous dissemination of official Canadian government time signals, derived from atomic clocks.

<span class="mw-page-title-main">WWV (radio station)</span> U.S. government shortwave radio station

WWV is a shortwave radio station, located near Fort Collins, Colorado. It has broadcast a continuous time signal since 1945, and implements United States government frequency standards, with transmitters operating on 2.5, 5, 10, 15, and 20 MHz. WWV is operated by the U.S. National Institute of Standards and Technology (NIST), under the oversight of its Time and Frequency Division, which is part of NIST's Physical Measurement Laboratory based in Gaithersburg, Maryland.

WWVB is a time signal radio station near Fort Collins, Colorado and is operated by the National Institute of Standards and Technology (NIST). Most radio-controlled clocks in North America use WWVB's transmissions to set the correct time.

<span class="mw-page-title-main">DCF77</span> German time signal radio station

DCF77 is a German longwave time signal and standard-frequency radio station. It started service as a standard-frequency station on 1 January 1959. In June 1973 date and time information was added. Its primary and backup transmitter are located at 50°0′56″N9°00′39″E in Mainflingen, about 25 km south-east of Frankfurt am Main, Germany. The transmitter generates a nominal power of 50 kW, of which about 30 to 35 kW can be radiated via a T-antenna.

<span class="mw-page-title-main">YVTO</span> Time signal radio station in Venezuela

YVTO is the callsign of the official time signal from the Juan Manuel Cagigal Naval Observatory in Caracas, Venezuela. The content of YVTO's signal, which is a continuous 1 kW amplitude modulated carrier wave at 5.000 MHz, is much simpler than that broadcast by some of the other time signal stations around the world, such as WWV.

<span class="mw-page-title-main">Allouis longwave transmitter</span> French longwave broadcast transmitter

The Allouis longwave transmitter has been France's central longwave broadcast transmitter since 1939. It is located near the village of Allouis.

<span class="mw-page-title-main">Droitwich Transmitting Station</span> Longwave and mediumwave radio transmitter in England

The Droitwich transmitting station is a large broadcasting facility for long-wave and medium-wave transmissions, established in 1934 in the civil parish of Dodderhill, just outside the village of Wychbold, near Droitwich in Worcestershire, England. The site is the location of the British Broadcasting Corporation's most powerful long-wave transmitter, which together with the two Scottish long-wave transmitters at Burghead and Westerglen forms a network broadcasting on the same frequency. The masts can be seen to the east from the M5 motorway, between Droitwich and Bromsgrove, as well as to the west from the Herefordshire/Worcestershire border. At night, the two sets of aircraft warning lights are visible from a long distance. The station is owned and operated by Arqiva.

<span class="mw-page-title-main">Grimeton Radio Station</span> Historic Swedish wireless telegraphy station

Grimeton Radio Station in southern Sweden, close to Varberg in Halland, is an early longwave transatlantic wireless telegraphy station built in 1922–1924, that has been preserved as a historical site. From the 1920s through the 1940s it was used to transmit telegram traffic by Morse code to North America and other countries, and during World War II was Sweden's only telecommunication link with the rest of the world. It is the only remaining example of an early pre-electronic radio transmitter technology called an Alexanderson alternator. It was added to the UNESCO World Heritage List in 2004, with the statement: "Grimeton Radio Station, Varberg is an exceptionally well preserved example of a type of telecommunication centre, representing the technological achievements by the early 1920s, as well as documenting the further development over some three decades." The radio station is also an anchor site for the European Route of Industrial Heritage. The transmitter is still in operational condition, and each year on a day called Alexanderson Day is started up and transmits brief Morse code test transmissions, which can be received all over Europe.

<span class="mw-page-title-main">ALS162 time signal</span> French longwave time signal radio station

ALS162 is a French longwave time signal and standard-frequency radio station and is used for the dissemination of the Metropolitan French national legal time to the public. TéléDiffusion de France broadcast the ALS162 time signal, provided by LNE-SYRTE and LNE-LTFB time laboratories under ANFR responsibility, from the Allouis longwave transmitter at 162 kHz, with a power of 800 kW.

<span class="mw-page-title-main">Haganeyama Transmitter</span>

Haganeyama Transmitter is an LF-time signal transmitter at Fuji-cho, Saga-city, Saga-ken, Japan used for transmitting the time signal JJY on 60 kHz. The Haganeyama site is one of two JJY transmitters, another is the Otakadoyama site.

<span class="mw-page-title-main">Casio Wave Ceptor</span> Radio-controlled wristwatch brand

The Wave Ceptor series is a line of radio-controlled watches by Casio. Wave Ceptor watches synchronise with radio time signals broadcast by various government time services around the world. These signals transmit the time measured by atomic clocks accurate to one second in millions of years. By synchronizing daily with the signals, the Wave Ceptor watches achieve high accuracy, using a quartz crystal to keep time in the interim. Some radio watches, including some Wave Ceptors, are solar-powered, supported by a rechargeable battery. The watch displays may be fully digital, analog, or analog-digital. Hybrid Wave Ceptor models support GPS satellite reception of both time and location, in addition to broadcast signals.

RBU is a time code radio station located in Moscow. It transmits a continuous 10 kW time code on 66⅔ kHz. This is commonly written as 66.66 or 66.666 kHz, but is actually 200/3 kHz. Until 2008, the transmitter site was near Kupavna 55°44′04″N38°9′0″E and used as antenna three T-antennas spun between three 150 metres tall grounded masts. In 2008, it has been transferred to the Taldom transmitter at 56°44′00″N37°39′48″E.

BSF is the callsign of the time signal transmitter owned by the National Time and Frequency Standards Laboratory of the Ministry of Economic Affairs (Taiwan), which transmits time information on 77.5 kHz in the longwave range. It was launched on May 1, 1969 and is broadcast from Zhongli District in Taichung using a T-antenna located at 25°0′20″N121°21′54″E.

<span class="mw-page-title-main">NAA (Arlington, Virginia)</span> Radio station in Arlington, Virginia (1913–1941)

NAA was a major radio facility located at 701 Courthouse Road in Arlington, Virginia. It was operated by the U.S. Navy from 1913 until 1941. The station was originally constructed as the Navy's first high-powered transmitter for communicating with its bases across the U.S. and the Caribbean. During its years of operation NAA was best known for broadcasting daily time signals, however, it also provided a variety of additional services, using multiple transmitters operating on frequencies ranging from longwave to shortwave. The station also conducted extensive experimental work, including, in 1915, the Navy's first transatlantic transmission of speech.

<span class="mw-page-title-main">Otakadoyayama Transmitter</span>

Otakadoyayama Transmitter is an LF-time signal transmitter at Tamura-City, Fukushima-ken, Japan used for transmitting the time signal JJY on 40 kHz. The Otakadoyama site is one of two JJY transmitters, another is the Haganeyama site.

References

  1. Ohtakadoya-yama LF Standard Time and Frequency Transmission Station, National Institute of Information and Communications Technology, 2004, retrieved 2014-08-10
  2. Williams, Martyn (2011-03-29). "Nuclear Crisis Stopped Time in Japan". PC Magazine . Retrieved 2017-05-07.
  3. Hagane-yama LF Standard Time and Frequency Transmission Station, National Institute of Information and Communications Technology, 2004, retrieved 2014-08-10
  4. Vincenty formula for distance between two Latitude/Longitude points gives 17139.695 m between ( 37°22′21″N140°50′56″E / 37.37250°N 140.84889°E ) and ( 37°25′17″N141°1′57″E / 37.42139°N 141.03250°E ), not including altitude changes.
  5. Martyn Williams (30 March 2011), Nuclear crisis stopped time in Japan, IDG News Service, archived from the original on 2018-03-03, retrieved 2011-03-30, Engineers have evacuated a radio station that provided the national time signal
  6. JJY Transmitted Log, 21 April 2011, retrieved 2011-04-23
  7. The Method of Emitting Standard Time and Frequency Signal Emission, National Institute of Information and Communications Technology, 2005, retrieved 2009-03-28
  8. The transmitters: JJY, C-MAX Time Solutions, retrieved 2009-03-28