Crash bar

Last updated

Crash bar doors in a school, with upper vertical rod latches Set of Crash Bar Doors.jpg
Crash bar doors in a school, with upper vertical rod latches

A crash bar (also known as a panicexit device, panic bar, or bump bar) [1] [2] is a type of door opening mechanism which allows users to open a door by pushing a bar. While originally conceived as a way to prevent crowd crushing in an emergency, crash bars are now used as the primary door opening mechanism in many commercial buildings.

Contents

The device consists of a spring-loaded metal bar which is fixed horizontally to a door that swings in the direction of an exit. Depressing the bar unlatches the door, allowing occupants to quickly leave the building. [3]

Modern fire standards often mandate that doors be fitted with crash bars in commercial and other occupancies where mass evacuation may be slowed by other types of door openers.

They are sometimes intended solely for emergency use and may be fitted with alarms. However, in many buildings the crash bar functions as the primary mechanism for opening a door in normal circumstances as well. They may even be used when not required by code because they are quicker and easier for users compared with a knob or lever handle.

Background

History

Following the events of the Victoria Hall disaster in Sunderland, England, in 1883 in which 183 children died because a door had been bolted at the bottom of a stairwell, the British government began legal moves to enforce minimum standards for building safety. This slowly led to the legal requirement that venues must have a minimum number of outward opening doors as well as locks which could be opened from the inside. Motivated by the Sunderland disaster, Robert Alexander Briggs (1868–1963) invented the panic bolt which was granted a UK patent on 13 August 1892. [4]

However, these moves were not globally copied. For example, in the United States, at least 602 people died in the Iroquois Theatre fire in Chicago in December 1903 because of door latch designs that were difficult for fleeing patrons to open. Five years later, 174 people in Ohio died in the Collinwood school fire, which led to a national outcry in the United States for greater fire safety in buildings.

On 31 December 1929, some 37 years after the panic bolt was patented, 71 children died during the Glen Cinema disaster at a Hogmanay film screening in Paisley, Renfrewshire, Scotland, when a smoking cellulose nitrate film canister sparked panic. Children rushing to escape the cinema became crushed against the padlocked exit doors. Even after a police officer broke a padlock, the inward-opening doors were held shut by the mass of bodies behind them. [5]

Justification for use

In virtually all [crowd crush] situations it is usually the authorities to blame for poor planning, poor design, poor control, poor policing and mismanagement.

Edwin Galea, professor of fire safety engineering at the University of Greenwich, England [6]

By the end of the 20th century, most countries had building codes (or regulations) which require all public buildings have a minimum number of fire and emergency exits. Crash bars are fitted to these types of doors because they are proven to save lives in the event of human crushes. Panic can often occur during mass building evacuations caused by fires or explosions.

In the event emergency exits are required, the crash bar works efficiently to allow people to pass through security doors without a reduction in speed. A crash bar's fast-acting mechanism reduces the risk that a rushing crowd might suddenly become a logjam at the exits. Such a human crush, which has many historical precedents, can cause falls, crushing, and other injury because the rear of a crowd has no idea that the people at the front of a crowd have come across a door.

Crash bars are typically found on doors which are required emergency exits serving a particular type or quantity of occupants. Common locations include doors which provide egress from assembly areas, doors which serve many occupants, or doors serving hazardous areas. For buildings subject to the International Building Code, or a locally adopted variation, they are required for certain healthcare, education, or assembly spaces, generally related to the number of occupants exiting through a given door. [7]

Latching

Vertical rod vs center post latching Exit Door Latching Configurations.png
Vertical rod vs center post latching

Mechanical types

Crash bars offer numerous configurations for latching to the door frame.

Vertical rods can be affixed to crash bars allowing both doors to be opened with no center clearance obstruction. When the bar is depressed, a chord within the vertical rod gets pulled, which lowers a latch at the top and/or bottom and allows the door to open. The Pullman latch, which attaches to a Pullman keeper, is the locking mechanism usually used at the ends of the vertical rods. [8] More expensive products may feature vertical rods and latches concealed within the door.

Diagram of Vertical Rod Latching Elements Pullman Latch and Keeper Diagram.png
Diagram of Vertical Rod Latching Elements

Some jurisdictions permit doors to latch to each other. For security, additional latching points may be added. For example, upper and lower vertical rods added to one door and connected to the leaf with no rods via a mortice latch. A double door coordinator is used to ensure the active leaf does not close before the inactive leaf. This configuration is not recommended for high traffic locations. [9]

Center posts are an alternative to vertical rods at double door exits. This offers less clearance because the post remains in the middle when both doors are open. That said, the post can often be removed with a key for occasions when items larger than a single door need to pass through. Center posts may be preferred over vertical rods because they have fewer moving parts, thus they have fewer components that can break.

Push bars themselves are some of the most reliable door opening mechanisms. To pass CE certification, bars must function between 100,000 and 500,000 opening cycles depending on the rating the manufacturer is seeking. [10]

Unlocking and latch hold

In some applications, such as storefront entrances, panic bars may be dogged during business hours. Dogging is a common feature on panic bars in which the bar is retracted with a key—freeing the door to swing without latching. This allows customers to apply force to any portion of the door, not just the bar, in order to open it.

Dogging is distinct from simple unlocking, which permits the user to open the door from both ends but still requires performing an action to release the latches. However, in applications where the exterior side contains an immovable dummy handle, as opposed to a knob or lever handle, it is usually impossible to unlock the crash bar without also dogging it.

Dogging can extend the life of the bar. Some bars can be unlocked /dogged electronically, while others take a cylinder lock, hex key, or contain no key functionality at all. [11] Dogging should be avoided in high wind areas where the door is susceptible to blowing open.

Doors with electromagnetic exit bars Electric Strike Doors.jpg
Doors with electromagnetic exit bars

Electric strike

Unlike a traditional crash bar, this type contains a horizontal touch sensor and no moving parts. When the sensor is pressed, it releases an electromagnetic lock. It may be used in tandem with a motion sensor which unlocks for anyone who stands in front of the door. This type of release must still unlock in the event of a power failure, and in some jurisdictions, the door must automatically unlock for a fire alarm activation. [12] Because these will not function in a long term power outage, they are most commonly used on secondary doors between a vestibule and the secure part of a building.

On automatic doors

In some jurisdictions, when automatic doors are used on the primary exit route, these doors are equipped with crash bars. In the event the automatic door does not function, it becomes an outward swinging rather than sliding door. Crash bars are one of many emergency release mechanisms that can be used with automatic doors. Depending on available space, a common alternative is to install an emergency exit door beside the automatic doors. Installation of a secondary crash bar equipped exit is often required in large buildings with revolving doors, since these are too slow for a crowd to move through.

Automatic sliding doors with crash bars Automatic Door with Bars.jpg
Automatic sliding doors with crash bars

Around the world

Cross bar style exit doors in Turkey Flamedoor.jpg
Cross bar style exit doors in Turkey

European Union

In the European Union, panic bars are governed by the standard EN 1125, Panic exit devices operated by a horizontal bar. As with other EN family standards, the English language version is produced by the British Standards Institution and utilises the call sign BS EN 1125. Panic bars are required to conform to this standard in order to carry CE marking and thus be sold in the European Economic Area. [13] [14]

In 2008, the standard was updated to include an alpha-numeric labelling scheme. In this system, products are tested to various benchmarks and assigned a letter or number accordingly. Products must achieve minimum quality scores in order to receive general CE approval. The nine rating categories are:

  1. Category of Use
  2. Number of Test Cycles
  3. Test Door Mass
  4. Fire Resistance
  5. Safety
  6. Corrosion Resistance
  7. Security
  8. Projection of device
  9. Type of device

EN 1125 is one of two standards which govern exit devices in the EU. The other standard, EN 179, governs door handles, push pads, and other exit devices with emergency release functionality.

However, EN 179 devices shall only be used at locations where people "are familiar with the emergency exit and its hardware and therefore a panic situation is unlikely to appear". Examples of places where EN 179 hardware may be used in place of EN 1125 panic bars include small apartment buildings and offices. [15]

United States

The first panic bar, made by Von Duprin, was available by 1908 in many models and configurations. [16]

In the US, building exit requirements are generally controlled by model codes such as the International Building Code and the NFPA Life Safety Code. Adoption of regulations varies by location and may occur at the city, county, or state level. [17]

Model codes are usually supplemented with amendments adopted locally. Additional requirements may be imposed on a site from an Authority Having Jurisdiction such as a local fire marshal. [18] Factors considered when mandating exit devices include the number of occupants who would need to leave in an emergency, the availability of other nearby exits, and proximity to any hazards equipment or chemicals.

In Europe, most panic bars are of the cross bar type, which are called Type A in the EN 1125 standard. This contrasts strongly with North American architectural design, which years ago switched to using predominantly touch bars (EN 1125 Type B) in new construction.

In Europe, the use of panic bars is generally confined to code required applications. In US and Canadian commercial buildings, they are frequently used even where not required by code, because bars are seen as being easier to use than knobs or lever handles. [19] For example, when used on the rear service door of a business, a worker whose hands are being used to carry bulky items can lean against a bar to release the lock.

While the public generally prefers automatic doors, they can be costly to install and maintain. [20]

Some manufacturers offer crash bars designed to resist microbial growth. This can include coating the bar with silver ions in order to create a chemical environment hostile to unwanted microbes. [21] Antimicrobial surfaces have shown to be effective at inhibiting bacterial, mold, and mildew growth; but may not be effective at stopping viruses such as SARS-CoV-2. [22]

See also

Related Research Articles

<span class="mw-page-title-main">Door</span> Movable barrier that allows ingress and egress

A door is a hinged or otherwise movable barrier that allows ingress (entry) into and egress (exit) from an enclosure. The created opening in the wall is a doorway or portal. A door's essential and primary purpose is to provide security by controlling access to the doorway (portal). Conventionally, it is a panel that fits into the doorway of a building, room, or vehicle. Doors are generally made of a material suited to the door's task. They are commonly attached by hinges, but can move by other means, such as slides or counterbalancing.

A child safety lock is a special-purpose lock for cabinets, drawers, bottles, etc. that is designed to help prevent children from getting at any dangerous things or contents. Young children are naturally curious about their surroundings and will always explore, but as they may be unaware of dangerous substances or situations, the results can be fatal. Numerous cases of poisoning have resulted from eating brightly colored pills or spilling cleaning solvents.

<span class="mw-page-title-main">Dead bolt</span> Locking mechanism

A deadbolt or deadlock is a type of lock morticed into a wooden door. Then, using a key from either side of the door, a bolt is thrown into the door frame, thus securing the door. It is distinct from a spring bolt lock because a deadbolt can only be opened by a key or handle. The more common spring bolt lock uses a spring to hold the bolt in place, allowing retraction by applying force to the bolt itself. A deadbolt can therefore make a door more resistant to entry without the correct key, as well as make the door more resistant to forced entry. A deadbolt is often used to complement a spring-bolt lock on an entry door to a building.

<span class="mw-page-title-main">Iroquois Theatre fire</span> 1903 building fire in Chicago, Illinois

The Iroquois Theatre fire was a catastrophic building fire in Chicago, Illinois, that broke out on December 30, 1903 during a performance attended by 1,700 people. The fire caused 602 deaths and 250 non-fatal injuries. It ranks as the worst theater fire in the United States, surpassing the carnage of the Brooklyn Theatre fire of 1876, which claimed at least 278 lives.

<span class="mw-page-title-main">Emergency exit</span> Pathway out of a structure designed for use during emergency evacuations

An emergency exit in a building or other structure is a special exit used during emergencies such as fires. The combined use of regular and emergency exits allows for faster evacuation, and emergency exits provide alternative means of evacuation if regular exits are inaccessible.

<span class="mw-page-title-main">Door furniture</span> Items that are attached to a door or a drawer to enhance its functionality or appearance

Door furniture or door hardware refers to any of the items that are attached to a door or a drawer to enhance its functionality or appearance.

<span class="mw-page-title-main">Door handle</span> Device to open or close door

A door handle or doorknob is a handle used to open or close a door. Door handles can be found on all types of doors including exterior doors of residential and commercial buildings, internal doors, cupboard doors and vehicle doors. There are many designs of door handle, depending on the appropriate use. A large number of handles, particularly for commercial and residential doors, incorporate latching or locking mechanisms or are manufactured to fit to standardised door locking or latching mechanisms.

<span class="mw-page-title-main">Door closer</span> Mechanical device that closes a door in a controlled manner

A door closer is a mechanical device that regulates the speed and action of a door’s swing. Manual closers store the force used to open the door in some type of spring and reuse it to close the door. Automatic types use electricity to regulate door swing behavior.

<span class="mw-page-title-main">Fire alarm control panel</span> Controlling component of a fire alarm system

A fire alarm control panel (FACP), fire alarm control unit (FACU), fire indicator panel (FIP), or simply fire alarm panel is the controlling component of a fire alarm system. The panel receives information from devices designed to detect and report fires, monitors their operational integrity, and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated initiating device, notification appliance, control, transmitter, or relay. There are four basic types of panels: coded panels, conventional panels, addressable panels, and multiplex systems.

<span class="mw-page-title-main">Fire door</span> Fire resistant door

A fire door is a door with a fire-resistance rating used as part of a passive fire protection system to reduce the spread of fire and smoke between separate compartments of a structure and to enable safe egress from a building or structure or ship. In North American building codes, it, along with fire dampers, is often referred to as a closure, which can be derated compared against the fire separation that contains it, provided that this barrier is not a firewall or an occupancy separation. In Europe national standards for fire doors have been harmonised with the introduction of the new standard EN 16034, which refers to fire doors as fire-resisting door sets. Starting September 2016, a common CE marking procedure was available abolishing trade barriers within the European Union for these types of products. In the UK, it is Part B of the Building Regulations that sets out the minimum requirements for the fire protection that must be implemented in all dwellings this includes the use of fire doors. All fire doors must be installed with the appropriate fire resistant fittings, such as the frame and door hardware, for it to fully comply with any fire regulations.

<span class="mw-page-title-main">Latch</span> Mechanical fastener

A latch or catch is a type of mechanical fastener that joins two objects or surfaces while allowing for their regular separation. A latch typically engages another piece of hardware on the other mounting surface. Depending upon the type and design of the latch, this engaged bit of hardware may be known as a keeper or strike.

<span class="mw-page-title-main">Manual fire alarm activation</span> Button or lever to activate fire alarms

Manual fire alarm activation is the process of triggering a fire alarm through a call point, pull station, or other device. This usually causes the alarm to sound the evacuation signal for the relevant building or zone. Manual fire alarm activation requires human intervention, as distinct from automatic fire alarm activation such as that provided through the use of heat detectors and smoke detectors. It is, however, possible for call points/pull stations to be used in conjunction with automatic detection as part of the overall fire detection and alarm system. Systems in completed buildings tend to be wired in and include a control panel. Wireless activators are common during construction.

<span class="mw-page-title-main">Electronic lock</span> Locking device which operates by means of electric current

An electronic lock is a locking device which operates by means of electric current. Electric locks are sometimes stand-alone with an electronic control assembly mounted directly to the lock. Electric locks may be connected to an access control system, the advantages of which include: key control, where keys can be added and removed without re-keying the lock cylinder; fine access control, where time and place are factors; and transaction logging, where activity is recorded. Electronic locks can also be remotely monitored and controlled, both to lock and to unlock.

<span class="mw-page-title-main">Fire alarm system</span> A system, that works using multiple devices to warn of a fire or other types of emergencies

A fire alarm system is a building system designed to detect and alert occupants and emergency forces of the presence of smoke, fire, carbon monoxide, or other fire-related emergencies. Fire alarm systems are required in most commercial buildings. They may include smoke detectors, heat detectors, and manual fire alarm activation devices, all of which are connected to a Fire Alarm Control Panel (FACP) normally found in an electrical room or panel room. Fire alarm systems generally use visual and audio signalization to warn the occupants of the building. Some fire alarm systems may also disable elevators, which under most circumstances, are unsafe to use during a fire.

<span class="mw-page-title-main">Electric strike</span> Door locking hardware whose mechanism is electromechanical

An electric strike is an access control device used for door frames. It replaces the fixed strike faceplate often used with a latch. Like a fixed strike plate, it normally presents a ramped or beveled surface to the locking latch allowing the door to close and latch just like a fixed strike would. However, an electric strike's ramped surface can, upon command, pivot out of the way when the lock on the door is in the locked position and the door is opened, allowing a user to pull/push the door to open it without operating the mechanical lock or using a mechanical key. After the door is opened past the keeper, the keeper returns to its standard position and re-locks when power is removed or applied, depending upon the strike's configuration.

<span class="mw-page-title-main">Three-point locking</span>

Three-point locking, or a multipoint lock, is a locking system installed in cabinet or locker doors to enable more secure locking. Whereas in single-point locking, the door on a cabinet locks only at the point where the key is turned, halfway up the edge of the door, three-point locking enables the top and bottom of the door to be simultaneously secured. This is accomplished by attaching two long steel rods to the lock on the inside of the door, which extend vertically upwards and downwards: when the lock is turned, the rotary movement of the latch on the inside of the door translates to vertical movement in these rods, with the result that the upper rod moves upwards by an inch or so, and the lower rod moves downwards similarly. This causes the ends of the rods to move through small holes in the flanges at the top and bottom of the door, resulting from the metal of the door being turned inwards, and the rods then move a short distance into holes in the metal surrounding the door. This effectively immobilizes the top and bottom of the door, and greatly increases the security of the door-locking compared to a door with only single-point locking.

<span class="mw-page-title-main">Door breaching</span> Methods used by military, police, firefighters to forcibly enter a structure

Door breaching is a process used by military, police, or emergency services to force open closed or locked doors. A wide range of methods are available depending on the door's opening direction, construction materials, etc., and one or more of these methods may be used in any given situation. In the United States, residential doors typically open inward while commercial building doors usually open outward. Some breaching methods require specialized equipment and can be categorized as one of the following: mechanical breaching, ballistic breaching, hydraulic breaching, explosive breaching, or thermal breaching.

<span class="mw-page-title-main">Electromagnetic lock</span> Door locking device

An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate.

<span class="mw-page-title-main">Lockset</span>

A lockset is the hardware and components that make up the locking or latching mechanism that can usually be found on a door or other hinged object but can also include sliding doors and dividers. The components of a lockset can include the door handles, latch bolt, dead bolt, face plate, strike plate, escutcheon, thumbturn, push button, turn button, and other trim. The lockset and associated hardware typically defines a door's function and how a user could access the two adjacent spaces defined by the opening associated with the lockset.

<span class="mw-page-title-main">Exit sign</span> Sign towards the nearest emergency exit

An exit sign is a pictogram or short text in a public facility denoting the location of the closest emergency exit to be used in case of fire or other emergency that requires rapid evacuation. Most relevant codes require exit signs to be permanently lit at all times.

References

  1. ↑ American National Standards Institute, ANSI/BHMA A156.3-2001, American National Standard for Exit Devices
  2. ↑ California Code of Regulations, Title 24, Part 2, "California Building Code." 1008.1.9
  3. ↑ ANSI/BHMA A156.3-2001. American National Standard for Exit Devices. American National Standards Institute. 2001.
  4. ↑ Lovell, Patricia. "Robert Alexander Briggs and the invention of the Panic Bolt".
  5. ↑ "The cinema panic that killed 71 children". 2019-12-31. Retrieved 2020-01-01.
  6. ↑ Lock, Samantha (1 November 2022). "Crowd crushes: how disasters like Itaewon happen, how can they be prevented, and the 'stampede' myth". The Guardian .
  7. ↑ 2009 International Building Code. Country Club Hills, Illinois: International Code Council, Inc. 2009. p. 1008.1.10. ISBN   978-1-58001-725-1.
  8. ↑ "What Is A Pullman Latch? » Door Hardware Genius" . Retrieved 2020-06-03.
  9. ↑ "Vertical Rod Panic Device - Doorware.com". www.doorware.com. Retrieved 2020-06-03.
  10. ↑ "Panic and Emergency Exit Hardware Introduction" (PDF).
  11. ↑ "Exit Devices: Dogging Options" . Retrieved 2020-06-03.
  12. ↑ Greene, Lori (2017-06-20). "Code Requirements for Electromagnetic Locks". I Dig Hardware. Retrieved 2020-06-04.
  13. ↑ ABLOY, ASSA. "BS EN 1125 - Standards and Legislation - UNION – Door Handles, Door Locks, Door Hardware and much more". www.uniononline.co.uk. Retrieved 2017-03-14.
  14. ↑ Int Door Controls. "Panic Hardware Brochure" (PDF). www.int-door-controls.co.uk/ccp51/media/downloads/pdf/Panic-Hardware-Brochure-07.pdf. Retrieved 14 March 2017.
  15. ↑ "Briton Exit Hardware Classifications Guide" (PDF). Archived from the original (PDF) on 15 March 2017. Retrieved 14 March 2017.
  16. ↑ Sweet's Indexed Catalogue of Building Construction, 1909
  17. ↑ "Code Adoption by State" (PDF). International Code Council. Archived from the original (PDF) on October 7, 2017. Retrieved March 17, 2017.
  18. ↑ "Who's Got the Power?". ecmweb.com. Retrieved 2017-03-14.
  19. ↑ "I Dig Hardware » Back-2-Basics: Panic Hardware". idighardware.com. 15 October 2013. Retrieved 2017-03-14.
  20. ↑ "Automatic Door Maintenance - Dash Door". Dash Door. 2013-08-12. Retrieved 2017-03-14.
  21. ↑ "Antimicrobial solutions" (PDF). 2014. Archived (PDF) from the original on 2020-05-10.
  22. ↑ "How to sanitize your hardware". us.allegion.com. Retrieved 2020-06-03.

Further reading

United Kingdom
United States
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.