Recycling in Australia is a widespread, and comprehensive part of waste management in Australia, with 60% of all waste collected being recycled. [1] Recycling is collected from households, commercial businesses, industries and construction. Despite its prominence, household recycling makes up only a small part (13%) [1] of Australia's total recycling. It generally occurs through kerbside recycling collections such as the commingled recycling bin and food/garden organics recycling bin, drop-off and take-back programs, and various other schemes. Collection and management of household recycling typically falls to local councils, with private contractors collecting commercial, industrial and construction recycling. In addition to local council regulations, legislation and overarching policies are implemented and managed by the state and federal governments. [2]
Prior to World War II, open and unregulated landfills as well as incinerators were a popular and viable solution to Australia's waste problem. The only material with enough value to compensate recycling was waste paper. Waste paper collections from households and factories started in Melbourne in the 1920s, with the practice becoming widespread across Australia by the 1940s due to the start of World War II. In addition to the collection and recycling of paper, World War II caused a very high level of demand for resources such as metal, paper, and rubber waste to contribute to the war effort. Despite the rise in recycling, these recycling practises faded after the war with no sustainable market for these resources. [3]
The 1970s saw the return of recycling due to an explosion of public concern about the protection of the environment. Similarly to pre World War II, the only major recycled product was paper- with 30% of consumption collected. [3] During the 1970s also saw the introduction of community recycling centres in Melbourne and Sydney local councils where the community could voluntarily bring glass, metal and paper. [3]
In the late 1980s and early 1990s many local councils began kerbside recycling collections. Kerbside recycling collections allowed Australian households to separate out recyclables such as paper and glass for processing. During this time extensive education campaigns educated Australians about the new practice, which has become commonplace well into the 21st century. [3]
One campaign, ‘Do the Right Thing’ was a highly successful advertising campaign launched by Keep Australia Beautiful which ran during the 1980s to help educate the public about litter and the importance of recycling. [3] [4]
The introduction of container deposit schemes in Australia during the 1980s and 1990s encouraged community groups to collect aluminium cans for recycling in many states and territories. Newspaper publishers also agreed to pay for paper waste to be collected by councils thus helping to fund kerbside collections. Collection rates for both materials rose to about 65% Australia wide with the amount of waste generated by each person reaching ~1 tonne a year. [3]
At the United Nations Conference on Environment and Development in Rio de Janeiro in 1992 Australia was a signatory to Agenda 21. Agenda 21 was designed for countries to "commit to waste minimisation, environmentally sound waste reuse and recycling, and environmentally sound waste treatment and disposal." [3]
In an attempt to encourage recycling, Australian states started imposing higher levies on landfills after 2006. This caused a reduction in landfill waste as the high costs (up to $200 tonne by 2014 in New South Wales) caused a strain on the disposal of waste. [5] [6]
On 1 January 2018, China announced Operation National Sword, an operation that restricted imports on 24 categories of Australian recycling materials, resulting in stockpiling of recyclable materials in Australia with no destination. The President of the Waste Management and Resource Recovery Association of Australia, Garth Lamb, had advocated for infrastructure projects to use recovered recycled materials rather than raw materials, such as crushed glass replacing sand in roadworks. [7] The new restrictions placed by China impose a maximum contamination threshold for accepted materials of 0.5%- a rate hard to achieve by the industry in Australia due to the levels of contamination. [8] Prior to Operation National Sword, Australia sent 1.25 million tons of waste to China in 2017. [9]
In an effort to rejuvenate the Australian recycling industry, a range of policies and programs have been established to reduce contamination and recycle more of Australia's waste onshore. In addition to programs established by South Australia in 1977 and the Northern Territory in 2012, container deposit schemes have been widely rolled out or are planning to be introduced in the remaining 6 Australian states and territories by 2023. [10] These programs have reduced contamination as bottles and cans are separated from the waste stream before being contaminated. [11]
A parliamentary inquiry into the waste and recycling industry in Australia filed a report on 13 June 2018. [12]
In 2020, the Victorian Government announced a recycling industry overhaul focusing on increasing recycling and reducing the amount of waste sent to landfills. This overhaul included the introduction of a container deposit scheme to be introduced in November 2023, [13] the introduction of a new household glass bin by 2027, the standardisation of bin lids, and mandating that every household will have a food and garden organics (FOGO) bin by 2030. [10] [14]
To incentivise recycling, local councils provide heavy discounts or the inclusion of a household recycling bin for free. In contrast, food and garden organic bins require a payment however are discounted. [15] [16] These incentives make recycling a viable option for households due to the small or non-existent cost associated with using the service/s.
Advertising campaigns based on educating the public about how to recycle, cohesive product labelling (the Australasian Recycling Label), and events including Planet Ark's 'National Recycling Week' assists in raising awareness on the issues surrounding recycling and how to correctly recycle. [17] [18] [19]
Household recycling in Australia is typically done through a system of kerbside collection bins with different coloured lids to represent different waste streams. The majority of states and territories use a red lid for landfill, yellow lid for recycling, and a green lid for food and garden organics. [20] In some New South Wales councils, a blue lid is used for paper and cardboard recycling, and Victoria is currently rolling out a purple lid bin for glass recycling. [21] [22] In 2018/19, 63% of all waste produced in Australia was recycled or recovered. [23] In 2016–2017, 46% of Municipal Solid Waste (MSW) was recycled. [24]
Recycling in Australia is managed on a council basis, where each council has their own rules on what can and can't be placed in the recycling bin. Despite this, the following items are commonly placed in the recycling bin: [25] [26] [27]
Metals collected through kerbside recycling bins include aluminium and steel which can be converted into new products depending on their level of contamination, the quality of the recycling, and the characteristics of the metal. [28]
Aluminium can be repurposed into new consumer metal products (cans, foil, trays) and can also be used in aeroplanes and consumer electronics. [29] Due to the aluminium's unique properties and high sale price, it can be recycled endlessly into new products. [30] [29] Recycling rates in Australia for aluminium packaging sits between 44% and 66% with the majority of processing occurring onshore. [31]
Steel cans are most commonly used in food packaging, as paint containers, and as aerosol cans which can all be recycled through kerbside collection. [28] [32] Recycled cans can be reprocessed into new food packaging, railway tracks, car parts and construction materials. In 2018, the rate of steel recycling was ~56% in Australia. [33]
Glass recycling is common in Australia with a recycling rate of 46%. [34] Recycling of glass occurs mostly onshore through companies like Visy and O–I Asia. [28] The process of recycling glass involves sortation and melting of the products to produce new glass products, sand, or for use in the construction of road projects. [28]
The Victorian Government announced in 2020 that every Victorian household would receive a purple lidded glass recycling bin. [10] The rollout will be completed by 2027 with the aim of reducing contamination in the yellow lid recycling bin and to increase the states recycling rate. [14]
The quality of paper and cardboard degrades over time as the recycling process continues. This means that traditionally the end product after the recycling process is at a lower quality than the original virgin product. [35] In 2022, the majority of Australia's paper and cardboard is mostly recycled in Australia. [36] Prior to the 2018 Operation National Sword, 55% of Australia's paper and cardboard waste was recycled locally with 28% recycled in China. [28]
Australia also has numerous carton (Tetra Pak) recycling facilities. [37] [38]
Plastics accepted in most kerbside recycling bins include: type 1 (PET), type 2 (HDPE), and type 5 (PP). [39] [40] [41]
Plastic name | SPI resin ID code | Example items |
---|---|---|
Polyethylene terephthalate | 1 | Water/juice/soda bottles, jars, and bottle caps |
High-density polyethylene | 2 | Shampoo and detergent bottles |
Polypropylene | 5 | Yogurt containers, take away containers, disposable cups and plates, and plant pots |
Other plastics (type 3, type 4, type 6, and type 7) aren't always recyclable through kerbside collection. [42] [39] Type 6 (polystyrene) can be dropped off at council operated transfer stations for recycling. [42] Type 4 (low-density polyethylene) was able to be recycled through REDcycle drop off points in supermarkets in a program that ended in 2022. [43]
Plastic waste can be reprocessed in a number of ways, with the result of being reconverted into various new products, such as bottles, bins, bags or piping. [44] [28] Prior to the introduction of Operation National Sword in 2018, 71% of Australian exports of scrap paper/paperboard and scrap plastics went to China. [45] After the introduction of Operation National Sword, the figure fell significantly to only 16% of exported mixed plastic scrap being sent to China during the full financial year of 2017–18. [45] This fell even further to 8% of exported mixed plastic scrap going to China in June 2018. [45]
Despite challenges faced in the industry, such as the collapse of the REDcycle program, [46] the plastics recycling industry is beginning to recover in Australia due to government incentives, export restrictions [47] [48] and supermarket cooperative work. [49]
Similar to recycling, food and garden organic collections are managed on a council basis with weekly or fortnightly collections. Traditionally, these bins would only include green garden waste collections, however beginning in the late 2010s, food waste began being accepted in the bins alongside the renaming of the bins to "food and garden organics". [50] [51] [52] These changes have contributed to an uptake in food and garden organic recycling. [53] Accepted items vary council to council, however these items are commonly accepted in the food and garden organics bin: [54] [51]
Upon collection, contents of the bin are taken to a composting site where it is screened for contamination before being turned into soil, potting mix, or mulch. [53]
Hard waste collections occur in most suburban and regional councils and is designed to collect waste that is too large for a kerbside collection bin or for items that aren't accepted in any of the standard waste collections. [55] Fixed hard waste collections happen twice a year, typically during the seasons of autumn and spring. Some councils use a ticketed approach where the resident has two collections per year that they can redeem at any time. [55] Items collected during a hard waste collection may be disposed, recycled, or reused depending on the condition. Items typically accepted include: [56] [57] [58] [59] [60]
Waste stream | Example items | Disposal method | Notes |
---|---|---|---|
Green waste | Sticks, tree branches, logs | Recycled | Councils typically ask for bundled green waste |
Scrap metal | Metal drums, car parts, white goods, hot water units | Recycled | Sometimes reused if in good condition |
Hard waste | Clothes, pottery, broken mirrors and glass, carpet, furniture | Typically disposed | |
Electronics | Any item with a plug or a cord (TVs, computers, printers) | Recycled | |
Mattresses | Mattresses | Typically recycled |
As hard waste is placed on a residents nature strip, members of the public are able to access and take items for their own reuse and repurpose. This removes the need for recycling or disposal and gives the item a longer use life. [61] [62]
For waste that cannot be recycled through traditional kerbside collections (hard to recycle items) or in areas where kerbside collections aren't available, drop-off locations provide options for waste disposal and recycling. Drop-off locations include council transfer stations and store drop-offs programs. [63] [64]
Transfer Stations are common across Australia to dispose of waste and hard to recycle items. The centres are designed to encourage sortation of items to reduce contamination, increase the cleanliness of the waste, and reduce the amount of waste sent to landfill. [65] Items commonly accepted at transfer stations are similar to what is accepted in a hard waste collection. Items commonly accepted include: [65] [66]
Store drop-offs are designed to be easily accessible to the consumer to dispose of their hard to recycle items, and similarly to transfer stations, require the recycler to sort items for recycling. Supermarkets and retailers that sell hard to recycle items typically have a bin for customers to dispose of these hard to recycle waste streams, with examples of bins including soft plastics, batteries, ink cartridges, and electronic waste. [67]
Electronic waste collection services were mandated under The National Television and Computer Recycling Scheme in 2011, and can be dropped off at transfer stations, and electronic/appliance retailers. [68] [69] Individual components are first separated from the electronic waste before each individual element is sent to be recycled. Major e-waste recyclers in Australia include Mobile Muster and Tech Collect, with most technology stores providing mobile phone or e-waste recycling bins. [28]
A study conducted in 2019 estimates that Australia recycles only 12–20% of its e-waste. [70] [71]
In Victoria and South Australia, it is illegal to dispose of e-waste in landfills. More states, including Western Australia, are planning to implement a ban by the end of the 2020s. [72]
Type 4 plastics (low density-polyethylene or soft plastics) are hard to recycle due to its tendency to become caught in processing machines at material recovery facilities. [73] Despite its difficulty to recycle, the material is also extremely common with 70 billion pieces used each year in Australia. [74] In a bid to help recycle this material, until 2022 the RED Group collected soft plastics dropped off by consumers at Coles and Woolworths stores at Redcycle bins. The collected materials were sorted and sent to Replas, where they were recycled and turned into park furniture, road surfaces and bollards. [28]
Following the collapse of the REDcycle program at the end of 2022, Aldi, Coles and Woolworths have started cooperating on finding solutions to the soft plastic recycling through the Soft Plastic Taskforce, chaired by the Department of Climate Change, Energy, the Environment and Water. It was announced in February 2024 that 12 locations in Melbourne would offer drop off bins for scrunchable food soft plastic that could be recycled through a newly operated facility. [75] The new program aims at reusing the soft plastic into shopping trolleys and baskets, replace aggregate in concrete or become and additive for asphalt road. [76]
Polystyrene (or type 6 plastic) is a common and very lightweight plastic, used for packaging and protection of goods. Polystyrene can be dropped off at most transfer stations for recycling, where it can be turned into coat hangers and synthetic timber. [77] The Australia Packaging Covenant reports that only 29.7% of expanded polystyrene used for packaging is recycled. Preventing this rate from being higher is the high likelihood of contaminating other recyclables and the difficulty of sorting. [77]
Although programs have existed before, in 2013, Aldi Supermarkets introduced the first supermarket battery recycling program in Australia. The program allowed customers to return AA, AAA, C, D, and 9V. Since the program was launched, through its partners Aldi have recycled 351 tonnes of batteries. In 2020 alone, 7.5 million batteries were diverted from landfill. [78] Since Aldi's launch, numerous other supermarkets and stores have launched similar battery recycling programs, with battery recycling rates growing to 10% by 2021. [79]
In April 2018, the first onshore lithium battery recycling plant was opened in New Gisborne, Victoria. [80]
In February 2022, "B-cycle" was federally authorised under the Product Stewardship Act. [81] B-cycle is a national recycling scheme in place to make it easier for Australians to dispose of their old batteries. B-cycle works with major retailers including Woolworths, Coles, Bunnings, Officeworks and Aldi to put battery collection bins at their stores to maximise coverage and access to the bins. [82]
Lead batteries (or car batteries) can be recycled at council operated transfer stations. There is a 99% recycling rate for lead batteries in 2021. [79]
Transfer stations and all IKEA stores accept light bulbs and fluorescent tubes for recycling. [83]
Automotive recycling is considered one of the main solutions the growing number of vehicles reaching end-of-life (EOL) cycle. According to the Australian Bureau of Statistics, during 2001 to 2015 the number of new motor vehicles sales increased by 48% in Australia. [84] The average life cycle of vehicle in Australia of 10.1 years, with the number of vehicles reaching its EOL cycle growing fast too. During 2014 to 2015, 765,828 vehicles reached their end-of-life cycle. [85] [86]
In Australia, vehicles that have reached their EOL are passed from owners to the auto recyclers directly or through an insurance company, car mechanics, or used car dealers. [87] In first stage of recycling, the car batteries and fluids are removed during the de-pollution process. In the second stage, the valuable and high demand vehicle parts are recovered from the vehicles and sold in the market for reuse. In last stage of the recycling process, the remaining parts of the vehicle are crushed and sent to metal recycling facilities to recover metals from the vehicle. [87] [88]
Printer ink cartridges are recycled through a program by the non-profit Cartridges 4 Planet Ark. [89] The program was founded in 2003 by Planet Ark with support from seven printer ink manufacturers, the program recycler Close the Loop and retailers. [90] [91] [92] The program has diverted 51 million cartridges from landfill with over 4,000 drop off locations nationwide. [90] Upon collection, cartridges are sorted and recycled into recycled inks, road surfaces, and eWood garden beds. [28] [93]
The majority of paint waste in Australia is recycled by the not-for-profit company Paintback. Since beginning operations in 2016, Paintback has recycled over 36 million kilograms of paint and packaging through 165+ drop-off locations. [94] The program is funded by a 15-cent per litre levy on products sold by Australia's major paint manufacturers. [95]
Chemical and hazardous waste recycling is promenade in Australia with most states having collection programs. [96] Once collected, chemicals are sealed in drums and are transported to a specialist waste treatment facility for recycling. [97]
State | Program/s |
---|---|
New South Wales | Community recycling centres and household Chemical CleanOut events by the NSW EPA |
Queensland | There is no state based program in Queensland, however local councils do provide services |
South Australia | Free household chemicals and paint drop-off by Green Industries |
Tasmania | Household hazardous waste collection days by the Northern Tasmanian Waste Management Group |
Victoria | Detox Your Home by Sustainability Victoria |
Western Australia | Household Hazardous Waste Program by WALGA |
Coffee pods can be recycled through produces of the pods including companies like Nespresso which have organised collection points at their stores, and created campaigns to help reduce their disposal issues. Coffee residuals are used as compost and aluminium can be recycled into cans, aeroplanes, and consumer products. [98] [28]
Clothes that are in good condition are encouraged to be donated at charity shops, donation bins or kerbside bagged collection. [99] This extends the life of the clothing and reduces the need for recycling. In cases where textiles aren't able to be donated, recycling is preferred. In Australia, there are a range of textile recycling businesses, store drop-off programs, and reuse initiatives. [100]
In total, more than 800,000 tonnes of leather, rubber and textiles were discarded 2018–19 with a recycling rate of just 7 per cent according to the most recent National Waste Report. [101] Despite this low figure, donations are common with a rate of (on average) 12.1 kg of clothing textiles donated per person in Australia. [102]
In Australia, commercial and industrial (also large apartments buildings) recycling is collected by private waste management contractors, as business council rates don't cover waste and recycling. [103] Excluding hazardous waste, it isn't compulsory to sort waste into different streams, however, it is more cost effective to recycle due to high fees associated with garbage collection. [103] In the state of New South Wales, general waste often costs more than twice as much as cardboard recycling. [104]
Almost 33 million tones of C&I waste is generated each year in Australia, with 53% (over 17 million tonnes) recycled. [1] Detailed breakdowns of C&I recycling are not recently available, but they cover similar types of materials as household recycling, as shown below.
Material type | Landfilled ('000 tonnes) | Recycled/recovered ('000 tonnes) | Total waste generation ('000 tonnes) | Recycling rate (%) |
---|---|---|---|---|
Cardboard | 803 | 1 834 | 2 637 | 70% |
Steel | 159 | 802 | 961 | 83% |
Office paper | 394 | 704 | 1 095 | 64% |
Unknown | 1 536 | 596 | 2 133 | 28% |
Food organics | 1 499 | 416 | 1 915 | 22% |
Other paper | 264 | 282 | 546 | 52% |
Timber | 498 | 278 | 775 | 36% |
Masonry materials | 239 | 224 | 463 | 48% |
Other organics | 439 | 216 | 656 | 33% |
Other glass | 31 | 112 | 142 | 79% |
Aluminium | 21 | 90 | 111 | 81% |
Other plastics | 368 | 76 | 444 | 17% |
Packaging glass | 22 | 54 | 76 | 71% |
Plastic packaging | 346 | 41 | 387 | 11% |
Leather & textiles | 107 | 27 | 134 | 20% |
Tyres/rubber | 40 | 13 | 53 | 25% |
Other metals | <1 | <1 | <1 | 88% |
Garden organics | 56 | - | 56 | 0% |
Total | 6 820 | 5 764 | 12 584 | 46%* |
*Overall recycling rate – not a total of the column.
Construction sites usually don't sort their waste for recycling onsite, and instead dispose of it in a landfill or sort it offsite for recycling. [106] For demolition sites, waste is sometimes sorted and sold for reuse – examples being roof tiles, bricks, and building fixtures. [107]
In total, the Construction and Demolition (C&D) sector recycled almost 80% of the 29 million tonnes it generated, the highest recycling rate of the three sectors. [1]
In cases where waste is sorted offsite, materials are recovered for resale and recycling at a materials recovery facility. Metals are recovered by a magnet, concrete, rock, stones and sand separated by trommels, timber is extracted, shredded and resold, bricks are separated and resold, and soil is cleaned and sold. The recycling process produces numerous different products that can be continued to be reused. [107] [106]
Recycling is the process of converting waste materials into new materials and objects. This concept often includes the recovery of energy from waste materials. The recyclability of a material depends on its ability to reacquire the properties it had in its original state. It is an alternative to "conventional" waste disposal that can save material and help lower greenhouse gas emissions. It can also prevent the waste of potentially useful materials and reduce the consumption of fresh raw materials, reducing energy use, air pollution and water pollution.
A materials recovery facility, materials reclamation facility, materials recycling facility or multi re-use facility is a specialized plant that receives, separates and prepares recyclable materials for marketing to end-user manufacturers. Generally, there are two different types: clean and dirty materials recovery facilities.
Municipal solid waste (MSW), commonly known as trash or garbage in the United States and rubbish in Britain, is a waste type consisting of everyday items that are discarded by the public. "Garbage" can also refer specifically to food waste, as in a garbage disposal; the two are sometimes collected separately. In the European Union, the semantic definition is 'mixed municipal waste,' given waste code 20 03 01 in the European Waste Catalog. Although the waste may originate from a number of sources that has nothing to do with a municipality, the traditional role of municipalities in collecting and managing these kinds of waste have produced the particular etymology 'municipal.'
A waste container, also known as a dustbin, rubbish bin, trash can, and garbage can, among other names, is a type of container intended to store waste that is usually made out of metal or plastic. The words "rubbish", "basket" and "bin" are more common in British English usage; "trash" and "can" are more common in American English usage. "Garbage" may refer to food waste specifically or to municipal solid waste in general.
A mechanical biological treatment (MBT) system is a type of waste processing facility that combines a sorting facility with a form of biological treatment such as composting or anaerobic digestion. MBT plants are designed to process mixed household waste as well as commercial and industrial wastes.
Kerbside collection or curbside collection is a service provided to households, typically in urban and suburban areas, of collecting and disposing of household waste and recyclables. It is usually accomplished by personnel using specially built vehicles to pick up household waste in containers that are acceptable to, or prescribed by, the municipality and are placed on the kerb.
A green bin is a large, movable, rigid plastic or metal container that contains biodegradable waste or compostable materials as a means to divert waste from landfills. In some local authorities, green bins are also used to contain unsorted municipal solid waste.
This article outlines the position and trends of recycling in Canada. Since the 1980s, most mid to large municipalities in most provinces have recycling programs, relying on curbside collection with either bins, boxes, or bags. These systems are not standardized, and the specific process differs for each province. Certain provinces have container-deposit systems in place for bottles, cans, and other beverage containers.
Recycling in the Netherlands is under the responsibility of local authorities. Different localities implement different systems, and also within a municipality there can be multiple regimes. Municipalities publish a yearly calendar of the pickup dates and the addresses of the waste separation and recycling stations.
In 2015, 43.5% of the United Kingdom's municipal waste was recycled, composted or broken down by anaerobic digestion. The majority of recycling undertaken in the United Kingdom is done by statutory authorities, although commercial and industrial waste is chiefly processed by private companies. Local Authorities are responsible for the collection of municipal waste and operate contracts which are usually kerbside collection schemes. The Household Waste Recycling Act 2003 required local authorities in England to provide every household with a separate collection of at least two types of recyclable materials by 2010. Recycling policy is devolved to the administrations of Scotland, Northern Ireland and Wales who set their own targets, but all statistics are reported to Eurostat.
Disposable food packaging comprises disposable products often found in fast-food restaurants, take-out restaurants and catering establishments. Typical products are foam food containers, plates, bowls, cups, utensils, doilies and tray papers. These products can be made from a number of materials including plastics, paper, bioresins, wood and bamboo.
The Post Office Box Lobby Recycling program is a project of the United States Postal Service (USPS) that was created on October 28, 2008, for mail customers to recycle paper items, using recycling bins placed in the customer lobbies of post office buildings. Some of the goals of the program are to reduce the amount of paper waste going to landfills, which helps to reduce the consumption of fiber from trees used for paper production and greenhouse gas emissions associated with waste disposal. USPS receives revenue from selling the material, and no tax dollars are used to fund the project. USPS was reported as having recycled over 200,000 short tons of waste in 2009, including paper, plastics and other waste.
The management of waste in New Zealand has become more regulated to reduce associated environmental issues. According to OECD data, New Zealand is the third most wasteful country in the OECD.
Recycling can be carried out on various raw materials. Recycling is an important part of creating more sustainable economies, reducing the cost and environmental impact of raw materials. Not all materials are easily recycled, and processing recyclable into the correct waste stream requires considerable energy. Some particular manufactured goods are not easily separated, unless specially process therefore have unique product-based recycling processes.
Products made from a variety of materials can be recycled using a number of processes.
China's waste import ban, instated at the end of 2017, prevented foreign inflows of waste products. Starting in early 2018, the government of China, under Operation National Sword, banned the import of several types of waste, including plastics with a contamination level of above 0.05 percent. The ban has greatly affected recycling industries worldwide, as China had been the world's largest importer of waste plastics and processed hard-to-recycle plastics for other countries, especially in the West.
Waste management in South Korea involves waste generation reduction and ensuring maximum recycling of the waste. This includes the appropriate treatment, transport, and disposal of the collected waste. South Korea's Waste Management Law was established in 1986, replacing the Environmental Protection Law (1963) and the Filth and Cleaning Law (1973). This new law aimed to reduce general waste under the waste hierarchy in South Korea. This Waste Management Law imposed a volume-based waste fee system, effective for waste produced by both household and industrial activities.
Waste management in Australia started to be implemented as a modern system by the second half of the 19th century, with its progresses driven by technological and sanitary advances. It is currently regulated at both federal and state level. The Commonwealth's Department of the Environment and Energy is responsible for the national legislative framework.
In Germany and Austria, the term yellow bag refers to a thin, yellowish transparent plastic bag, in which, in the context of local waste disposal, any waste made of plastic, metal or composite materials can be handed in. Depending on the agreement with the cities and municipalities, it may also be possible to use a 'yellow bin'. Yellow bags or yellow bins are part of the Dual System in the German waste management industry.
The RedCycle or REDcycle program was an Australian soft plastic recycling program started in 2010 by RG Programs and Services and suspended in 2022.
{{cite web}}
: CS1 maint: multiple names: authors list (link){{cite web}}
: CS1 maint: numeric names: authors list (link){{cite book}}
: CS1 maint: location missing publisher (link)