SB George Smeed

Last updated

Thames barges, Maldon - geograph.org.uk - 370946.jpg
George Smeed in Maldon in 2005
History
United Kingdom
Name:George Smeed
Builder: Smeed-Dean Co Ltd (Murston)
Yard number: 83340
Commissioned: 1882
Status: Private use and private charter ship
General characteristics
Tonnage: 59 rebuilt 64
Propulsion: Sails and auxiliary diesel engine
Crew: 2
Notes: Wood

George Smeed is a Thames barge built in 1882 by Smeed Dean & Co. Ltd. in Murston.

Contents

Name

The barge is named after the Sittingbourne entrepreneur, George Smeed (1812- 1881) who began business in 1846 in Murston. The building of Victorian London created a vast demand for bricks. The yellow Kent Stock Brick which was cheaper to make than the more traditional red brick; Sittingbourne had the brickearth needed to make them, and easy access to the Swale and the London River. By 1860 he owned expanding brickfields, shipyards along the creek and barges. The business traded as Smeed-Dean Co Ltd until 1926 when it was sold. [1]

Owners

Based at Maldon owned by Carol Greenhalgh.

Description

She was built in 1881 [registered in 1882] in Murston Sittingbourne by Smeed Dean for their personal use. This meant she was a brick barge destined to take bricks from Sittingbourne or Snodland to London, and towns along the Kent and Essex coast. She was rated at 58 tons, and would carry a cargo of 110 GRT tons (the unit of volume). She was deep and did not have raised hatches or a raised cabin. She was steered with a tiller. Her compass was kept under the glass cabin hatch, so it could be seen from within and without. In 1922 she was rebuilt as a 64-ton vessel that could carry a 150 GRT tons cargo. However, she kept her original rigging and was under-canvased for this size of vessel, and very light headed, in that small corrections on the helm could cause large and unpredictable changes of course. By 1949 she was sailing with a crew of two, but earlier she had a skipper, a mate and a boy who acted as cook and tended the lamps. Her cabin was entered directly down a vertical ladder, though in later times, a wall was added to act as a vestible where the wet oilskins could be left. With a three-man crew, the cooking was done in the fo'castle where the boy had his berth. [3] She was spritsail rigged and had a bowsprit that would be topped in the harbours or along the quays. [3]

Although normally employed in the Thames, its estuary and adjoining rivers, she did venture further afield on occasions. Hedley Farrington recalls one voyage in the mid 1920s from Sittingbourne to Devonport in company with SB Gertrude May. They were loaded with cement. It was winter time and the voyage lasted three months. [4]

Typical passage

Hervey Benham describes a typical passage on board the George Smeed in 1949 from Colchester to Gravesend. The passage is reliant on the speed and direction of the wind, and the depth and flow of the tidal river. [3] He leaves Colchester on an Saturday afternoon, and the barge is pulled into the River Colne by a small motor launch. The hatches are fixed and first sail to be raised is the topsail then their boat is attached to the davits; this is the difference between a coastal barge and an inland barge. This is all done before passing Wivenhoe. The mainsail is dropped and set by the Alresford Woods. The launch casts off and seeks another tow. About 4.00 pm, the sails are set for a starboard tack- then the bowsprit with the jib attached to the stay is dropped and secured, the jib topsail is now set. The stays have to trimmed to re-establish balance, and the foresail, jib and jib-topsail sheeted. It is approaching high water when George Smeed edges out of the Colne, under the lee of East Mersea Point with the Bradwell shore to windward, and heads for the Bench Head Buoy [lower-alpha 1] [ 51°44.61′N01°01.50′E / 51.74350°N 1.02500°E / 51.74350; 1.02500 [5] [lower-alpha 2] ]. [6] As the wind was SSW, and they took the unmarked channel between the Knoll and the Whitaker- this was known as the West Spitway [ 51°42.50′N01°08.05′E / 51.70833°N 1.13417°E / 51.70833; 1.13417 [7] [lower-alpha 3] ] in 1801, they lowered the leeboard to act as a watchdog as they sailed over this shallow water, if it had bumped the bottom a chain would created some noise. They passed into the darker water and thus deeper water of the Whitaker Channel. [8] They prepared themselves for the night, by rounding her into the wind, brailed her mainsail and the foresail slid down the mast, fifteen fathoms of chain was paid out and the anchor bit into the sand. Close by was the Whitaker buoy[ 51°44.15′N01°10.55′E / 51.73583°N 1.17583°E / 51.73583; 1.17583 [7] ] and to the south was the Swin and the Barrow Deep. The topsail sheet was let go, clewlines secured and the vang falls hardened on the quarter crab winches. The ebb flow finished and the rain arrived. All secured it was down to the cabin and the cooking stove. [9]

In the morning, time was spent tidying up the rigging which had been displaced for the previous cargo of timber. The chains spanning the hold had to be shackled up- as they had been released; these prevent the hull from splaying Barges are designed to have a long hold which is a structural weakness if the hold is not kept in tension. In that time it had moved a full inch. Rather later than was wise, the anchor was raised; it was slack water and the George Smeed did not get the advantage of the ebb tide to pull her to windward so she was put on a starboard tack to get onto the Maplins to get away from the full tide in the main channel. She went over the Middle Deep, to within a couple of cables length from the Barrow [beacon at 51°37.15′N01°07.15′E / 51.61917°N 1.11917°E / 51.61917; 1.11917 [10] ]. Round she came, as jib, jib topsail, and foresail were let fly; the moment is used to trim the jib topsail sheet and she set off south-westerly to the Sheers, (the point on the Maplin [Bank] where the Sheers lighthouse had stood [near 51°35.50′N01°04.60′E / 51.59167°N 1.07667°E / 51.59167; 1.07667 [10] ]). She tacked three times by the Blacktail Spit [ 51°31.45′N00°56.78′E / 51.52417°N 0.94633°E / 51.52417; 0.94633 [10] ] before joining the [Yantlet] channel. [lower-alpha 4] She passed the Nore, where the lightship had stood before being replaced by the forts. Medway was to windward and Southend to leeward. As the breeze strengthened, the topmast became whippy so the Jib topsail was dropped and stowed at the end of the bowsprit. She sailed all of Sea Reach, and a mile into the Gravesend Reach before anchoring for the night. [11]

The Monday, the start was at 5 am, the anchor didn't come up easily, and the sails were set. This time the bowsprit was topped and the jib-topsail was rehanked to the stemhead becoming a staysail. There was still little wind. To come up to the tier, a boomie would anchor up wind and drift in, but the George Smeed came in under sail from the leeward and crept to the tier. The anchor is lowered. Then 'Down foresail', 'Down tops'l', which must be lowered before it is sheeted. The voyage was over and the George Smeed loaded its next cargo of potash. [12]

Related Research Articles

Topsail

A topsail ("tops'l") is a sail set above another sail; on square-rigged vessels further sails may be set above topsails.

Cutter (boat) type of boat

A cutter is a sailing vessel which is distinguished from a sloop by having more than one foresails, and the main mast stepped slightly further back. Cutters are most commonly private yachts but the term may also be used for some rowing or power boats, for example, the United States Coast Guard Cutter.

Gaff rig

Gaff rig is a sailing rig in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the gaff. Because of the size and shape of the sail, a gaff rig will have running backstays rather than permanent backstays.

Thames Estuary

The Thames Estuary is where the River Thames meets the waters of the North Sea, in the south-east of Great Britain.

Thames sailing barge

A Thames sailing barge is a type of commercial sailing boat once common on the River Thames in London. The flat-bottomed barges with a shallow draught and leeboards, were perfectly adapted to the Thames Estuary, with its shallow waters and narrow tributary rivers. The larger barges were seaworthy vessels, and were the largest sailing vessel to be handled by just two men. The average size was about 120 tons and they carried 4,200 square feet (390 m2) of canvas sail in six working sails. The mainsail was loose-footed and set up with a sprit, and was brailed to the mast when not needed. It is sheeted to a horse, as is the foresail; they require no attention when tacking. The foresail is often held back by the mate to help the vessel come about more swiftly.

Spritsail

The spritsail is a four-sided, fore-and-aft sail that is supported at its highest points by the mast and a diagonally running spar known as the sprit. The foot of the sail can be stretched by a boom or held loose-footed just by its sheets. A spritsail has four corners: the throat, peak, clew, and tack. The Spritsail can also be used to describe a rig that uses a spritsail.

<i>Baron of Renfrew</i> (ship)

Baron of Renfrew was a four-masted barque of 5,294 gross register tonnage (GRT), built of wood in 1825 by Charles Wood in Quebec, Canada. She was one of the largest wooden ships ever built, although she was a disposable ship built for a one-way voyage to transport timber to England and did not complete a single voyage before breaking up.

Murston Human settlement in England

Murston is a suburb of Sittingbourne in Kent, England. It is about 1 mile north-east of central Sittingbourne, on the east bank of the Milton Creek.

<i>L. A. Dunton</i> (schooner)

L. A. Dunton is a National Historic Landmark fishing schooner and museum exhibit located at the Mystic Seaport Museum in Mystic, Connecticut. Built in 1921, she is one of three remaining vessels afloat of this type, which was once the most common sail-powered fishing vessel sailing from New England ports. In service in New England waters until the 1930s and Newfoundland into the 1950s. After a brief period as a cargo ship, she was acquired by the museum and restored to her original condition.

Smeed may refer to:

<i>SB Lady of the Lea</i>

Lady of the Lea is a spritsail Thames sailing barge, the last such barge to be built in England. She was built in 1931 to carry explosives from Waltham Abbey Royal Gunpowder Mills on the River Lea to Woolwich Arsenal on the River Thames. The barge was later sold and rebuilt. She currently operates as a private yacht and competes in Thames sailing barge matches.

SB <i>Centaur</i>

SB Centaur is a wooden Thames sailing barge, built in Harwich, Essex, England in 1895. She was used to carry various cargoes, mainly grain, for the next 60 years. During the First World War she carried food and coal to the French Channel ports. During the Second World War Centaur was damaged when sailing to assist with the Dunkirk Evacuation. She did war work for the duration of the conflict.

SB Kathleen Spritsail Thames barge built 1901

The SB Kathleen was a spritsail Thames barge built by Glover at Gravesend, Kent, in England in 1901, and registered in Rochester. Her official number was 113,708. She was built to carry grain- for capacity rather than speed. she was 82.8 feet (25.2 m) long and had a beam of 19.7 feet (6.0 m). Light, she drew 30 inches (76 cm) of water, and laden 6 feet (1.8 m).

The Thames Sailing Barge Match is the second oldest sailing race in the world, beaten only by the America's Cup. It starts off Stanford-le-Hope and finishes off the Three Daws public house in Gravesend on the London River and is open to spritsail rigged Thames sailing barges, it uses the same course and rules as were used in the first match in 1863.

<i>SB Kitty</i> (1895)

Kitty is a wooden Thames sailing barge in the bowsprit class of 65 tons. She was built in Harwich in 1895. She is No. 209 on the National Historic Ships Register.

SB Decima

The Decima is a steel Thames sailing barge constructed in Southampton in 1899 by J G Fay & Son Ltd, for E. J. Goldsmith of Grays, Essex. She is back under sail and resident on the River Darent in Dartford, Kent. She is a notable "Historic Ship".

SB Mirosa

Mirosa is a Thames barge which was built in 1892. From 1892 until 1947, she sailed under the name Ready when the name was sold to Trinity House for a lightship support vessel. Under her new name, she traded until 1955. Mirosa has never had an engine.

SB Edme

Edme is a Thames barge which was built in 1898 for the Horlocks of Mistley. She was registered in Harwich. She is one of two barge sailing today that have no auxiliary engine

Swin (Thames) A passage in the Thames estuary

The Swin is a passage in the Thames estuary between Maplin Sands, Foulness Sand and Gunfleet Sand northwest and the Barrow and Sunk sand ridges (shoals), southeast. The Swin was used by barges and leisure craft from the Essex rivers, and coasters and colliers from Hull, Great Grimsby, North East England, Edinburgh and other similar sets of trading ports.

References

Notes

  1. At the junction of the Rivers Colne and Blackwater
  2. The banks and channels in the Thames estuary move, and the buoys are moved accordingly. The coordinates shown are those on cited charts, in 1949 they may have been in a slightly different position
  3. Now marked by the Wallet Spitway and Swin Spitway buoys
  4. The main channel up the Thames

References

  1. "Brick Making". www.sittingbourne-museum.co.uk. Retrieved 10 September 2018.
  2. "George Smeed – Thames Barge". thamesbarge.org.uk. Retrieved 11 September 2018.
  3. 1 2 3 Benham 1986, pp. 176-185.
  4. Farrington 1985.
  5. Imray chart folio 2000, chart 2000.7.
  6. Benham 1986, p. 177.
  7. 1 2 Imray chart folio 2000, chart 2000.1.
  8. "Crouch (River) inc Burnham and Fambridge [Expanded View] - East Coast: pilotage, charts, photos and marine business listings". www.visitmyharbour.com. Retrieved 16 September 2018.
  9. Benham 1986, p. 179.
  10. 1 2 3 Imray chart folio 2100, chart 2100.7.
  11. Benham 1986, p. 180.
  12. Benham 1986, p. 184.

Bibliography