Langer Heinrich (crane vessel)

Last updated
Langer Heinrich
Langer Heinrich (Genua).JPG
Langer Heinrich floating crane
History
NameLanger Heinrich
Ordered1913
Builder Demag and AG Weser
Yard numberBremerhaven shipyard
Completed1915
RenamedBD-6000(US Army), Maestrale (1985-2015)
Identification IMO number:  8959415
NotesWebsite: http://www.langerheinrich.it
General characteristics
Class and typeFloating crane
Length50.42 m (165 ft 5 in)
Beam30.92 m (101 ft 5 in)
Height81.4 m (267 ft 1 in)
Depth3.05 m (10 ft 0 in)
Installed power1000HP steam engine (1915), four diesel engines (1955)
PropulsionTwo propellers
Speed4 Knots max
CapacityLift 250 tons max.
CrewMin. 2

Langer Heinrich, or in English Long Henry, is a floating crane commissioned in 1915 for the Wilhelmshaven Imperial Shipyard in Wilhelmshaven, Germany and has been located in Genoa, Italy since 1997. At the time of completion she was the largest floating crane in the world, passing up the Ajax crane barge completed in 1914. [1] [2] [3] [4] [5]

Contents

History

The imperial shipyard Wilhelmshaven needed a powerful and high lifting crane to help complete battleships before the outbreak of the World War I. The crane was completed in 1915 and originally was known as the Grosser Schwimmkran, but was christened Langer Heinrich. The crane was built by Demag in Duisburg and the float pontoon for the crane was built by AG Weser. The crane needed to lift gun turrets, ship components and sometimes entire ship hulls. It was used to assemble the German cruiser Admiral Graf Spee and German battleship Tirpitz. The pontoon float is 50.42 m by 30.92 m with a depth draft of 3.05 m. The crane displaces 3,898 tons and was powered by two triple expansion steam engines with 1,000 HP each until being refitted with Diesel engines in 1955. The crane had three smaller hoists for lifting 10, 20 and 50 tons. The main hoist has two 125 tonne lifting units which could be coupled for a combined lift of 250 tonnes. The crane had a maximum jib tower height of 81.4 m. The crane is self-propelled with two propellers and floats on pontoons. The pontoon has 41 compartments, some of which can be flooded to counterbalance the load. The superstructure can be rotated through 360 degrees. The crane has a deadweight of 2,393 tons. It was so famous in its day that it used to be pictured on some German bank notes, Deutsche Marks.

After the end of World War I, the United Kingdom claimed the crane as war reparation. The move across the North Sea turned out to be too difficult though and was canceled. Instead, as part of the war reparation, similar cranes were built for Portsmouth, England in 1920 and Brest, France in 1935. When the SS Bremen was built in 1928, the Langer Heinrich lifted the boiler plant into the ship's hull. In 1944 she was used in Bremen, Germany for submarine construction at the AG Weser shipyard. During World War II air raids on Bremen, the Langer Heinrich received minor damage and was subsequently moved to Nordenham for safe storage.

USN 148 lifted by the Langer Heinrich in 1953 USN 148 Algol.jpg
USN 148 lifted by the Langer Heinrich in 1953
Langer Heinrich Langer Heinrich (Namensschild).JPG
Langer Heinrich
German Type XVII submarine is lifted from the water by Langer Heinrich , at Bremerhaven, Germany on August 11, 1945. Type XVIIB Submarine SC 210745.jpg
German Type XVII submarine is lifted from the water by Langer Heinrich, at Bremerhaven, Germany on August 11, 1945.

Bremerhaven

After the surrender of the Nazi Germany, the United States Navy confiscated the crane in 1945. Under the designation BD-6000 she was used until November of 1947 in Bremen and Bremerhaven for the American maritime service group, to lift sunk ships in the harbors. She also helped with the repair of the port facilities. In 1950 she was taken over by the United States Army Transportation Corps and taken to Bremerhaven. According to tradition, the largest crane was always called Langer Heinrich, so with the return of the crane, she received her old name again. In the Lloyd Werft Drydock at Bremerhaven the drive system was rebuilt in 1956. The crane now had four six-cylinder diesel engines with 480 hp each. The 1920 hp drives eight generators with 105 kW each and four generators with 50 kW each. Two other 22-horsepower engines and a 105-horsepower diesel engine supplied the on-board system when the crane was idle. The conversion cost 4 million Deutsche Mark. The new electromechanical system was supplied by Siemens-Schuckert companies of Hamburg and Darmstadt. The engine room has installed 4 two-stroke turbocharged diesel engines, each with an output of 358 kW at 600 revolutions / minute. Each engine is coupled permanently to 2 alternators 105 kW and a 50 kW, which make electrical energy at 220 volts. [6]

The crane's ownership was returned to the Federal Republic of Germany in 1985. The crane is used to lift small boats and ships for repair work. She also help the Bremen warehouse company with heavy piece when needed. She help build the many new container bridges at the new Bremerhaven container terminal.

Genoa

In 1985 the crane was sold to an Italian company that moved her from Bremerhaven to Sardinia, she was renamed Maestrale for a short time. She was towed by tugboats after being placed on a 10,000-ton barge. In 1990 she was sold to Maestrale Genova in Genoa and moved to the Port of Genoa, where she help build new ships. In 2002 she was declared a "Monument to Industrial Archaeology" by the Italian government. Thus in 2002 she became part of the Ministry of Heritage and Culture. In 2005, Langer Heinrich underwent general repair work due to her age and to restore her to original look, the work was completed in 2008. She was upgraded and can now lift 275 tonnes max, which she did in her acceptance test. In 2015 the crane was 100 years old. Plan are to make her a part of a museum. The crane regularly hosts cultural activities and tours. [7] [8] [9]

Related Research Articles

<span class="mw-page-title-main">AG Weser</span> Shipbuilding company

Aktien-Gesellschaft "Weser" was one of the major German shipbuilding companies, located at the Weser River in Bremen. Founded in 1872 it was finally closed in 1983. All together, A.G. „Weser" built about 1,400 ships of different types, including many warships. A.G. „Weser" was the leading company in the Deutsche Schiff- und Maschinenbau AG, a cooperation of eight German shipbuilding companies between 1926 and 1945.

<i>Otto Hahn</i> (ship) German nuclear-powered cargo vessel

Otto Hahn was one of only four nuclear-powered cargo vessels built to date. Planning of a German-built trade and research vessel to test the feasibility of nuclear power in civil service began in 1960 under the supervision of German physicist Erich Bagge. Launched in 1964, her nuclear reactor was deactivated 15 years later in 1979 and replaced by a conventional diesel engine room. The ship was scrapped in 2009.

<span class="mw-page-title-main">Dry dock</span> Basin drained to allow work on a vessel

A dry dock is a narrow basin or vessel that can be flooded to allow a load to be floated in, then drained to allow that load to come to rest on a dry platform. Dry docks are used for the construction, maintenance, and repair of ships, boats, and other watercraft.

<span class="mw-page-title-main">Lighter aboard ship</span>

The lighter aboard ship (LASH) system refers to the practice of loading barges (lighters) aboard a bigger vessel for transport. It was developed in response to a need to transport lighters, a type of unpowered barge, between inland waterways separated by open seas. Lighters are typically towed or pushed around harbors, canals or rivers and cannot be relocated under their own power. The carrier ships are known variously as LASH carriers, barge carriers, kangaroo ships or lighter transport ships.

<i>Eisvogel</i>-class icebreaker

The Eisvogel class icebreakers was a two ship class built for the German Navy by the Hitzler Werft shipyard of Lauenburg/Elbe.

<span class="mw-page-title-main">Bremer Vulkan</span>

Bremer Vulkan AG was a prominent German shipbuilding company located at the Weser river in Bremen-Vegesack. It was founded in 1893 and closed in 1997 because of financial problems and mismanagement.

SMS <i>Arcona</i> (1902) Light cruiser of the German Imperial Navy

SMS Arcona was the ninth member of the ten-ship Gazelle class of light cruisers that were built for the German Kaiserliche Marine in the late 1890s and early 1900s. The Gazelle class was the culmination of earlier unprotected cruiser and aviso designs, combining the best aspects of both types in what became the progenitor of all future light cruisers of the Imperial fleet. Built to be able to serve with the main German fleet and as a colonial cruiser, she was armed with a battery of ten 10.5 cm (4.1 in) guns and a top speed of 21.5 knots. Arcona was a modified version of the basic Gazelle design, with improved armor and additional coal storage for a longer cruising range.

SMS <i>Victoria Louise</i> Protected cruiser of the German Imperial Navy

SMS Victoria Louise was the lead ship of her class of protected cruisers, built for the German Imperial Navy in the late 1890s. She was laid down at the AG Weser shipyard in 1895, launched in March 1897, and commissioned into the German fleet in February 1899. She was named after Princess Victoria Louise, the daughter of Kaiser Wilhelm II. The ship was armed with a battery of two 21 cm guns and eight 15 cm guns and had a top speed of 19.2 knots.

SS <i>Arabic</i> (1920)

SS Arabic, originally built as Berlin, was a passenger steamship launched on 7 November 1908 which was built by the AG Weser shipbuilding company in Germany. Her gross register tonnage was advertised at 16,786 tons. She made her maiden voyage on 1 May 1909 from New York to Genoa and Bremerhaven. In September 1914 she became an auxiliary cruiser with the Imperial German Navy as a minelayer.

Titan (crane)

Titan was a floating crane that operated in Sydney Harbour from 1919 until 1991. She was fabricated in Carlisle in the United Kingdom and then sent to Cockatoo Island Dockyard in Sydney for assembly before entering service with the Royal Australian Navy (RAN).

E-Ship 1

The E-Ship 1 is a roll-on/lift-off (RoLo) cargo ship that made its first voyage with cargo in August 2010. The ship is owned by the third-largest wind turbine manufacturer, Germany's Enercon GmbH. It is used to transport wind turbine components. The E-Ship 1 is a Flettner ship: four large rotorsails that rise from its deck are rotated via a mechanical linkage to the ship's propellers. The sails, or Flettner rotors, aid the ship's propulsion by means of the Magnus effect – the perpendicular force that is exerted on a spinning body moving through a fluid stream.

SMS <i>Beowulf</i> Coastal defense ship of the German Imperial Navy

SMS Beowulf was the second vessel of the six-member Siegfried class of coastal defense ships built for the German Imperial Navy. Her sister ships were Siegfried, Frithjof, Heimdall, Hildebrand, and Hagen. Beowulf was built by the AG Weser shipyard between 1890 and 1892, and was armed with a main battery of three 24-centimeter (9.4 in) guns. She served in the German fleet throughout the 1890s and was rebuilt in 1900 – 1902. She served in the VI Battle Squadron after the outbreak of World War I in August 1914, but saw no action. Beowulf was demobilized in 1915 and used as a target ship for U-boats thereafter. She was ultimately broken up for scrap in 1921.

SMS <i>Medusa</i> Light cruiser of the German Imperial Navy

SMS Medusa was a member of the ten-ship Gazelle class of light cruisers that were built for the German Kaiserliche Marine in the late 1890s and early 1900s. The Gazelle class was the culmination of earlier unprotected cruiser and aviso designs, combining the best aspects of both types in what became the progenitor of all future light cruisers of the Imperial fleet. Built to be able to serve with the main German fleet and as a colonial cruiser, she was armed with a battery of ten 10.5 cm (4.1 in) guns and a top speed of 21.5 knots. Medusa served in all three German navies—the Kaiserliche Marine, the Reichsmarine of Weimar Germany, and the Kriegsmarine of Nazi Germany—over the span of over forty years.

SMS <i>München</i> Light cruiser of the German Imperial Navy

SMS München was the fifth of seven Bremen-class cruisers of the Imperial German Navy, named after the city of Munich. She was built by AG Weser in Bremen, starting in 1903, launched in April 1904, and commissioned in January 1905. Armed with a main battery of ten 10.5 cm (4.1 in) guns and two 45 cm (18 in) torpedo tubes, München was capable of a top speed of 22.5 knots.

SMS <i>Pfeil</i> Aviso of the German Imperial Navy

SMS Pfeil was an aviso of the Imperial German Navy, the second and final member of the Blitz class. Her primary offensive armament consisted of a bow-mounted torpedo tube, and she was armed with a battery of light guns to defend herself against torpedo boats, a sign of the growing importance of torpedoes as effective weapons in the period. The Blitz class featured a number of innovations in German warship design: they were the first steel hulled warships and the first cruiser-type ships to discard traditional sailing rigs.

MS <i>Iona</i> P&O Cruise ship

MS Iona is an Excellence-class cruise ship in service for P&O Cruises, a subsidiary of Carnival Corporation & plc. Built by German shipbuilder Meyer Werft in Papenburg, she was delivered in October 2020 at a cost of £730 million. At 184,089 GT, Iona became the largest cruise ship commissioned for P&O and the British market upon delivery until sister ship Arvia was delivered in 2022. Iona was floated out on 18 February 2020 and delivered eight months later on 9 October amid the COVID-19 pandemic, which delayed her debut by more than a year until 7 August 2021, when she sailed her maiden voyage from Southampton.

<i>Herman the German</i> (crane vessel) Floating crane

Titan, better known by its former nickname Herman the German, is a large floating crane currently serving in the Panama Canal performing heavy lifts for lock maintenance. Prior to its move to Panama in 1996, the crane was based at the Long Beach Naval Shipyard from the end of World War II until the yard's closure in 1995. It was seized from the German Kriegsmarine following the end of World War II as part of war reparations. The crane was built by Demag Cranes AG as Schwimmkran nr. 1 in 1941 for the Kriegsmarine, where it had served in the Baltic Sea tending German U-boats. MMSI number: 374940000

<i>Ajax</i> (crane barge)

Ajax is a floating crane built to move and install the canal locks and other large parts of the Panama Canal. Ajax also helped in ship repairs and clearing the canal as needed. Ajax and her identical sister crane, the Hercules, were the largest floating cranes at time of completion, able to install the massive Panama Canal locks. Ajax could lift a maximum of 250 tons to a height of 21 feet (6.40 m), with a close reach. At Ajax's far reach she could lift a maximum of 100 tons. Ajax and Hercules were built by Deutsche Maschinenbau AG (1910-1977) . After the Ajax and Hercules, Deutsche Maschinenbau AG later made the Langer Heinrich, or Long Henry in 1915, in use for 100 years.

Arsterturm was a Hansa A Type cargo ship which was built as Betzdorf in 1945 by Deutsche Werft, Hamburg, Germany for Unternehmen der Eisenstahlindustrie, Bremen. She was seized as a prize of war in 1945, passing to the Ministry of War Transport and renamed Empire Gaffer. Sold in 1947, renamed Baltrader then Baltic Fir in 1952, she was sold to West Germany in 1956, rebuilt and renamed Arsterturm. She was sold in 1969 to India and renamed Unigoolnar. A further sale in 1976 saw her renamed Sudarsan Shakti, serving until 1981 when she was scrapped.

<i>Hiev</i>-class crane ship Class of German Navy crane ships

The Type 711 Hiev-class crane ship was a class of floating cranes built for the Marinearsenal of the German Navy in Kiel and Wilhelmshaven

References

  1. ↑ "A 'floating' Meccano crane". Times of Malta.
  2. ↑ "marinetraffic.com, Langer Heinrich".
  3. ↑ "Langer Heinrich - IMO 8959415 - ShipSpotting.com - Ship Photos and Ship Tracker". www.shipspotting.com.
  4. ↑ "maritime-connector.com, LANGER HEINRICH".
  5. ↑ Gas Turbine Powerhouse: The Development of the Power Generation Gas Turbine, pape 742, By Dietrich Eckardt
  6. ↑ "Long Heinrich Floating Crane Retirement". longhenry.com.
  7. ↑ "cultureimpresa.it, La gru galleggiante Langer Heinrich dal 1915 ad oggi" (PDF).
  8. ↑ Bradt: Liguria By Rosie Whitehouse
  9. ↑ "Langer Heinrich " Home". www.langerheinrich.it.

Further reading

44°24′21″N8°55′28″E / 44.405799°N 8.924575°E / 44.405799; 8.924575

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.