Thermal expansion valve

Last updated
Basic construction of a TEV. The flexible diaphragm actuates the poppet valve; an increasing pressure in the sensing bulb will press down on the poppet and open the valve further. There is also an adjustable spring providing a closing force on the valve which controls the superheat. Thermostatic expansion valve.svg
Basic construction of a TEV. The flexible diaphragm actuates the poppet valve; an increasing pressure in the sensing bulb will press down on the poppet and open the valve further. There is also an adjustable spring providing a closing force on the valve which controls the superheat.
The sensing bulb is positioned near the end of the evaporator and ensures enough refrigerant flows to chill the whole evaporator, but not so much that liquid reaches the sensing position. The equalisation connection is needed when the pressure at the sensing position differs from the pressure at the valve output. Thermostatic valve in system.svg
The sensing bulb is positioned near the end of the evaporator and ensures enough refrigerant flows to chill the whole evaporator, but not so much that liquid reaches the sensing position. The equalisation connection is needed when the pressure at the sensing position differs from the pressure at the valve output.

A thermal expansion valve or thermostatic expansion valve (often abbreviated as TEV, TXV, or TX valve) is a component in vapor-compression refrigeration and air conditioning systems that controls the amount of refrigerant released into the evaporator and is intended to regulate the superheat of the refrigerant that flows out of the evaporator to a steady value. Although often described as a "thermostatic" valve, an expansion valve is not able to regulate the evaporator's temperature to a precise value. The evaporator's temperature will vary only with the evaporating pressure, which will have to be regulated through other means (such as by adjusting the compressor's capacity).

Contents

Thermal expansion valves are often referred to generically as "metering devices", although this may also refer to any other device that releases liquid refrigerant into the low-pressure section but does not react to temperature, such as a capillary tube or a pressure-controlled valve.

Theory of operation

A thermal expansion valve is a key element to a heat pump; this is the cycle that makes air conditioning, or air cooling, possible. A basic refrigeration cycle consists of four major elements: a compressor, a condenser, a metering device and an evaporator. As a refrigerant passes through a circuit containing these four elements, air conditioning occurs.

The cycle starts when refrigerant enters the compressor in a low-pressure, moderate-temperature, gaseous form. The refrigerant is compressed by the compressor to a high-pressure and high-temperature gaseous state. The high-pressure and high-temperature gas then enters the condenser. The condenser cools the high-pressure and high-temperature gas allowing it to condense to a high-pressure liquid by transferring heat to a lower temperature medium, usually ambient air. In order to produce a cooling effect from the higher pressure liquid, the flow of refrigerant entering the evaporator is restricted by the expansion valve, reducing the pressure and allowing isenthalpic expansion back into the vapor phase to take place, which absorbs heat and results in cooling.

A TXV type expansion device has a sensing bulb that is filled with a liquid whose thermodynamic properties are similar to those of the refrigerant. This bulb is thermally connected to the output of the evaporator so that the temperature of the refrigerant that leaves the evaporator can be sensed. The gas pressure in the sensing bulb provides the force to open the TXV, and as the temperature drops this force will decrease, therefore dynamically adjusting the flow of refrigerant into the evaporator.

The superheat is the excess temperature of the vapor above its boiling point at the evaporating pressure. No superheat indicates that the refrigerant is not being fully vaporized within the evaporator and liquid may end up recirculated to the compressor which is inefficient and can cause damage. On the other hand, excessive superheat indicates that there is insufficient refrigerant flowing through the evaporator coil, and thus a significant portion toward the end is not providing cooling. Therefore, by regulating the superheat to a small value, typically only a few °C, the heat transfer of the evaporator will be near optimal, without excess liquid refrigerant being returned to the compressor. [1]

In order to provide an appropriate superheat, a spring force is often applied in the direction that would close the valve, meaning that the valve will close when the bulb is at a lower temperature than the refrigerant is evaporating at. Spring-type valves may be fixed, or adjustable, although other methods to ensure a superheat also exist, such as the sensing bulb having a different vapor composition to the rest of the system.

Some thermal expansion valves are also specifically designed to ensure that a certain minimum flow of refrigerant can always flow through the system, while others can also be designed to control the evaporator's pressure so that it never rises above a maximum value.

A pilot-operated thermostatic expansion valve, the upper valve is an externally balanced TEV, flow through this valve opens the larger lower valve. Thermostatic Expansion Valve PHT.jpg
A pilot-operated thermostatic expansion valve, the upper valve is an externally balanced TEV, flow through this valve opens the larger lower valve.

Description

Flow control, or metering, of the refrigerant is accomplished by use of a temperature sensing bulb, filled with a gas or liquid charge similar to the one inside the system, that causes the orifice in the valve to open against the spring pressure in the valve body as the temperature on the bulb increases. As the suction line temperature decreases, so does the pressure in the bulb and therefore on the spring, causing the valve to close. An air conditioning system with a TX valve is often more efficient than those with designs that do not use one. [2] Also, TX valve air conditioning systems do not require an accumulator (a refrigerant tank placed downstream of the evaporator's outlet), since the valves reduce the liquid refrigerant flow when the evaporator's thermal load decreases, so that all the refrigerant completely evaporates inside the evaporator (in normal operating conditions such as a proper evaporator temperature and airflow). However, a liquid refrigerant receiver tank needs to be placed in the liquid line before the TX valve so that, in low evaporator thermal load conditions, any excess liquid refrigerant can be stored inside it, preventing any liquid from backflowing inside the condenser coil from the liquid line.

At heat loads which are very low compared to the valve's power rating, the orifice can become oversized for the heat load, and the valve can begin to repeatedly open and close, in an attempt to control the superheat to the set value, making the superheat oscillate. Cross charges, that is, sensing bulb charges composed of a mixture of different refrigerants or also non-refrigerant gases such as nitrogen (as opposed to a charge composed exclusively of the same refrigerant inside the system, known as a parallel charge), set so that the vapor pressure vs temperature curve of the bulb charge "crosses" the vapor pressure vs temperature curve of the system's refrigerant at a certain temperature value (that is, a bulb charge set so that, below a certain refrigerant temperature, the vapor pressure of the bulb charge suddenly becomes higher than that of the system's refrigerant, forcing the metering pin to stay into an open position), help to reduce the superheat hunt phenomenon by preventing the valve orifice from completely closing during system operation. The same result can be attained through different kinds of bleed passages that generate a minimum refrigerant flow at all times. The cost, however, is determining a certain flow of refrigerant that will not reach the suction line in a fully evaporated state while the heat load is particularly low, and that the compressor must be designed to handle. By carefully selecting the amount of a liquid sensing bulb charge, a so-called MOP (maximum operating pressure) effect can be also attained; above a precise refrigerant temperature, the sensing bulb charge will be entirely evaporated, making the valve begin restricting flow irrespective of the sensed superheat, rather than increasing it in order to bring evaporator superheat down to the target value. Therefore, the evaporator pressure will be kept from increasing above the MOP value. This feature helps to control the compressor's maximum operating torque to a value that is acceptable for the application, such as a small displacement car engine.

A low refrigerant charge condition is often accompanied when the compressor is operational by a loud whooshing sound heard from the thermal expansion valve and the evaporator, which is caused by the lack of a liquid head right before the valve's moving orifice, resulting in the orifice trying to meter a vapor or a vapor/liquid mixture instead of a liquid.

Types

There are two main types of thermal expansion valves: internally or externally equalized. The difference between externally and internally equalized valves is how the evaporator pressure affects the position of the needle. In internally equalized valves, the evaporator pressure against the diaphragm is the pressure at the inlet of the evaporator (typically via an internal connection to the outlet of the valve), whereas in externally equalized valves, the evaporator pressure against the diaphragm is the pressure at the outlet of the evaporator. Externally equalized thermostatic expansion valves compensate for any pressure drop through the evaporator. [3] For internally equalised valves a pressure drop in the evaporator will have the effect of increasing the superheat.

Internally equalized valves can be used on single circuit evaporator coils having low-pressure drop. If a refrigerant distributor is used for multiple parallel evaporators (rather than a valve on each evaporator) then an externally equalized valve must be used. Externally equalized TXVs can be used on all applications; however, an externally equalized TXV cannot be replaced with an internally equalized TXV. [4] For automotive applications, a type of externally equalized thermal expansion valve, known as the block type valve, is often used. In this type, either a sensing bulb is located within the suction line connection within the valve body and is in constant contact with the refrigerant that flows out of the evaporator's outlet, or a heat transfer means is provided so that the refrigerant is able to exchange heat with the sensing charge contained in a chamber located above the diaphragm as it flows to the suction line.

Although the bulb/diaphragm type is used in most systems that control the refrigerant superheat, electronic expansion valves are becoming more common in larger systems or systems with multiple evaporators to allow them to be adjusted independently. Although electronic valves can provide greater control range and flexibility that bulb/diaphragm types cannot provide, they add complexity and points of failure to a system as they require additional temperature and pressure sensors and an electronic control circuit. Most electronic valves use a stepper motor hermetically sealed inside the valve to actuate a needle valve with a screw mechanism, on some units only the stepper rotor is within the hermetic body and is magnetically driven through the sealed valve body by stator coils on the outside of the device.

Related Research Articles

<span class="mw-page-title-main">Dehumidifier</span> Device which reduces humidity

A dehumidifier is an air conditioning device which reduces and maintains the level of humidity in the air. This is done usually for health or thermal comfort reasons or to eliminate musty odor and to prevent the growth of mildew by extracting water from the air. It can be used for household, commercial, or industrial applications. Large dehumidifiers are used in commercial buildings such as indoor ice rinks and swimming pools, as well as manufacturing plants or storage warehouses. Typical air conditioning systems combine dehumidification with cooling, by operating cooling coils below the dewpoint and draining away the water that condenses.

<span class="mw-page-title-main">Evaporative cooler</span> Device that cools air through the evaporation of water

An evaporative cooler is a device that cools air through the evaporation of water. Evaporative cooling differs from other air conditioning systems, which use vapor-compression or absorption refrigeration cycles. Evaporative cooling exploits the fact that water will absorb a relatively large amount of heat in order to evaporate. The temperature of dry air can be dropped significantly through the phase transition of liquid water to water vapor (evaporation). This can cool air using much less energy than refrigeration. In extremely dry climates, evaporative cooling of air has the added benefit of conditioning the air with more moisture for the comfort of building occupants.

<span class="mw-page-title-main">Chiller</span> Machine that removes heat from a liquid coolant via vapor compression

A chiller is a machine that removes heat from a liquid coolant via a vapor-compression, adsorption refrigeration, or absorption refrigeration cycles. This liquid can then be circulated through a heat exchanger to cool equipment, or another process stream. As a necessary by-product, refrigeration creates waste heat that must be exhausted to ambience, or for greater efficiency, recovered for heating purposes. Vapor compression chillers may use any of a number of different types of compressors. Most common today are the hermetic scroll, semi-hermetic screw, or centrifugal compressors. The condensing side of the chiller can be either air or water cooled. Even when liquid cooled, the chiller is often cooled by an induced or forced draft cooling tower. Absorption and adsorption chillers require a heat source to function.

<span class="mw-page-title-main">Absorption refrigerator</span> Refrigerator that uses a heat source

An absorption refrigerator is a refrigerator that uses a heat source to provide the energy needed to drive the cooling process. Solar energy, burning a fossil fuel, waste heat from factories, and district heating systems are examples of convenient heat sources that can be used. An absorption refrigerator uses two coolants: the first coolant performs evaporative cooling and then is absorbed into the second coolant; heat is needed to reset the two coolants to their initial states. Absorption refrigerators are commonly used in recreational vehicles (RVs), campers, and caravans because the heat required to power them can be provided by a propane fuel burner, by a low-voltage DC electric heater or by a mains-powered electric heater. Absorption refrigerators can also be used to air-condition buildings using the waste heat from a gas turbine or water heater in the building. Using waste heat from a gas turbine makes the turbine very efficient because it first produces electricity, then hot water, and finally, air-conditioning—trigeneration.

Economizers, or economisers (UK), are mechanical devices intended to reduce energy consumption, or to perform useful function such as preheating a fluid. The term economizer is used for other purposes as well. Boiler, power plant, heating, refrigeration, ventilating, and air conditioning (HVAC) may all use economizers. In simple terms, an economizer is a heat exchanger.

<span class="mw-page-title-main">Vapor-compression refrigeration</span> Refrigeration process

Vapour-compression refrigeration or vapor-compression refrigeration system (VCRS), in which the refrigerant undergoes phase changes, is one of the many refrigeration cycles and is the most widely used method for air conditioning of buildings and automobiles. It is also used in domestic and commercial refrigerators, large-scale warehouses for chilled or frozen storage of foods and meats, refrigerated trucks and railroad cars, and a host of other commercial and industrial services. Oil refineries, petrochemical and chemical processing plants, and natural gas processing plants are among the many types of industrial plants that often utilize large vapor-compression refrigeration systems. Cascade refrigeration systems may also be implemented using two compressors.

<span class="mw-page-title-main">Turboexpander</span> Type of turbine for high-pressure gas

A turboexpander, also referred to as a turbo-expander or an expansion turbine, is a centrifugal or axial-flow turbine, through which a high-pressure gas is expanded to produce work that is often used to drive a compressor or generator.

<span class="mw-page-title-main">Heat pump and refrigeration cycle</span> Mathematical models of heat pumps and refrigeration

Thermodynamic heat pump cycles or refrigeration cycles are the conceptual and mathematical models for heat pump, air conditioning and refrigeration systems. A heat pump is a mechanical system that transmits heat from one location at a certain temperature to another location at a higher temperature. Thus a heat pump may be thought of as a "heater" if the objective is to warm the heat sink, or a "refrigerator" or “cooler” if the objective is to cool the heat source. The operating principles in both cases are the same; energy is used to move heat from a colder place to a warmer place.

<span class="mw-page-title-main">Condenser (heat transfer)</span> System for condensing gas into liquid by cooling

In systems involving heat transfer, a condenser is a heat exchanger used to condense a gaseous substance into a liquid state through cooling. In doing so, the latent heat is released by the substance and transferred to the surrounding environment. Condensers are used for efficient heat rejection in many industrial systems. Condensers can be made according to numerous designs and come in many sizes ranging from rather small (hand-held) to very large. For example, a refrigerator uses a condenser to get rid of heat extracted from the interior of the unit to the outside air.

A crankcase heater is an electrical component in a compressor in an air-conditioning system, heat pump system, or chiller system. The crankcase heater is normally on all the time, even when the unit is not running, though temperature sensors and set points may turn it off when not needed. A crankcase heater's sole purpose is to prevent refrigerant migration and mixing with crankcase oil when the unit is off, and to prevent condensation of refrigerant in the crankcase of a compressor. The crankcase heater keeps refrigerant at a temperature higher than the coldest part of the system. A crankcase heater generally has the same electrical symbol as a resistor because it converts electricity directly into heat via electrical resistance. The resistance in the heater coil determines the heat it produces when voltage is applied.

<span class="mw-page-title-main">Freeze stat</span> Temperature sensing device

A freeze stat is a temperature sensing device for HVAC that monitors a heat exchanger to prevent its coils from freezing. Freeze stats can be used on both refrigerant-to-air, and refrigerant-to-liquid type heat exchangers and serve different purposes with similar goals for each.

<span class="mw-page-title-main">Radiator (engine cooling)</span> Heat exchangers used for cooling internal combustion engines

Radiators are heat exchangers used for cooling internal combustion engines, mainly in automobiles but also in piston-engined aircraft, railway locomotives, motorcycles, stationary generating plants or any similar use of such an engine.

HVAC is a major sub discipline of mechanical engineering. The goal of HVAC design is to balance indoor environmental comfort with other factors such as installation cost, ease of maintenance, and energy efficiency. The discipline of HVAC includes a large number of specialized terms and acronyms, many of which are summarized in this glossary.

<span class="mw-page-title-main">Pumpable ice technology</span> Type of technology to produce and use fluids or secondary refrigerants

Pumpable icetechnology (PIT) uses thin liquids, with the cooling capacity of ice. Pumpable ice is typically a slurry of ice crystals or particles ranging from 5 micrometers to 1 cm in diameter and transported in brine, seawater, food liquid, or gas bubbles of air, ozone, or carbon dioxide.

The term subcooling refers to a liquid existing at a temperature below its normal boiling point. For example, water boils at 373 K; at room temperature (293 K) liquid water is termed "subcooled". Subcooled liquids are frequently used in refrigeration cycles, steam turbine cycles, and some rocket engines use subcooled propellants.

<span class="mw-page-title-main">Automotive air conditioning</span> System to cool the air in a vehicle

Automotive air conditioning systems use air conditioning to cool the air in a vehicle.

In refrigeration, flash-gas is refrigerant in gas form produced spontaneously when the condensed liquid is subjected to boiling. The presence of flash-gas in the liquid lines reduces the efficiency of the refrigeration cycle. It can also lead several expansion systems to work improperly, and increase superheating at the evaporator. This is normally perceived as an unwanted condition caused by dissociation between the volume of the system, and the pressures and temperatures that allow the refrigerant to be liquid. Flash-gas must not be confused with lack of condensation, but special gear such as receivers, internal heat exchangers, insulation, and refrigeration cycle optimizers may improve condensation and avoid gas in the liquid lines.

The Glossary of Geothermal Heating and Cooling provides definitions of many terms used within the Geothermal heat pump industry. The terms in this glossary may be used by industry professionals, for education materials, and by the general public.

A multi-evaporator system is a vapor-compression refrigeration system generally consisting of four major components:

  1. Evaporator
  2. Compressor
  3. Condenser
  4. Thermal expansion valve

Heat engines, refrigeration cycles and heat pumps usually involve a fluid to and from which heat is transferred while undergoing a thermodynamic cycle. This fluid is called the working fluid. Refrigeration and heat pump technologies often refer to working fluids as refrigerants. Most thermodynamic cycles make use of the latent heat of the working fluid. In case of other cycles the working fluid remains in gaseous phase while undergoing all the processes of the cycle. When it comes to heat engines, working fluid generally undergoes a combustion process as well, for example in internal combustion engines or gas turbines. There are also technologies in heat pump and refrigeration, where working fluid does not change phase, such as reverse Brayton or Stirling cycle.

References

  1. ↑ "Air Conditioning Clinic - Refrigeration Cycle" (PDF). www.tranebelgium.com.
  2. ↑ Whitman, William C.; Johnson, Bill; Johnson, William M.; Tomczyk, John; Whitman, Bill (October 2004). Refrigeration & Air Conditioning Technology. Thomson Delmar Learning. ISBN   9781401837655.
  3. ↑ "Flow Control-Contractor Tip Card" (PDF). www.emersonclimate.com. Emerson Climate Technologies. Archived from the original (PDF) on 27 June 2013. Retrieved 16 June 2014.
  4. ↑ "Thermostatic Expansion Valves" (PDF). sporlanonline.com. Parker Hannifin Corporation, Sporlan Division. Retrieved 16 June 2014.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.