BACnet

Last updated

BACnet is a communication protocol for building automation and control (BAC) networks that use the ASHRAE, ANSI, and ISO 16484-5 standards [1] protocol.

Contents

BACnet was designed to allow communication of building automation and control systems for applications such as heating, ventilating, and air-conditioning control (HVAC), lighting control, access control, and fire detection systems and their associated equipment. The BACnet protocol provides mechanisms for computerized building automation devices to exchange information, regardless of the particular building service they perform.

History

The development of the BACnet protocol began in June, 1987, in Nashville, Tennessee, at the inaugural meeting of the ASHRAE BACnet committee, known at that time as SPC 135P, "EMCS Message Protocol". [2] The committee worked at reaching consensus using working groups to divide up the task of creating a standard. The working groups focused on specific areas and provided information and recommendations to the main committee. The first three working groups were the Data Type and Attribute Working Group, Primitive Data Format Working Group, and the Application Services Working Group.

BACnet became ASHRAE/ANSI Standard 135 in 1995, and ISO 16484-5 in 2003. The Method of Test for Conformance to BACnet was published in 2003 as BSR/ASHRAE Standard 135.1. BACnet is under continuous maintenance by the ASHRAE Standing Standard Project Committee 135.

BACnet had an almost immediate impact on the HVAC controls industry. In 1996 Alerton announced a BACnet product line for HVAC controls, from the operator's workstation to small variable air volume (VAV) controllers. [3] Automated Logic Corporation and Delta Controls soon followed suit. On July 12, 2017, BACnet reached a milestone with the issuance of the 1000th Vendor ID. Vendor IDs are assigned by ASHRAE and are distributed internationally. Those vendor identifiers can be viewed at the BACnet website Archived 2009-11-21 at the Wayback Machine .

H. Michael (Mike) Newman, Manager of the Computer Section of the Utilities and Energy Management Department at Cornell University, served as the BACnet committee chairman until June, 2000, when he was succeeded by his vice-chair of 13 years, Steven (Steve) Bushby from NIST.

During Steve Bushby's four-year term as committee chair the BACnet standard was republished twice, in 2001 and 2004, each time with new capabilities added to the standard. The 2001 version featured, among other things, extensions to support fire / life-safety systems.

In June, 2004, 17 years after the first BACnet meeting and back in Nashville, William (Bill) Swan (a.k.a. "BACnet Bill") from Alerton began his four-year stint as committee chair. During his term the number of committee working groups grew to 11, pursuing areas such as support for lighting, access control, energy utility/building integration, and wireless communications.

In January 2006 the BACnet Manufacturers Association and the BACnet Interest Group of North America combined their operation in a new organization called BACnet International Archived 2020-08-17 at the Wayback Machine .

In June 2008, in Salt Lake City, Dave Robin from Automated Logic Corporation took over the reins as the new committee chair after serving 4 years as vice chair. During Dave's term, 22 addenda were published for the 135-2008 standard and republished as 135-2010. Several addenda were published for 135-2010 and the standard was republished as 135-2012.

In June 2012, in San Antonio, Carl Neilson from Delta Controls took over the reins as the new committee chair after serving 4 years as vice chair. During Carl's term, 12 addenda were published for the 135-2012 standard and it was republished as 135-2016. Carl stepped down as chair in June 2015.

In June 2015, Bernhard Isler, from Siemens, became chair after serving 3 years as vice chair and 4 years as secretary. During Bernhard's term, 10 addenda were published for the 135-2016 standard. Once addenda to 135.1-2013 was also published. Bernhard stepped down as chair in June 2018.

In June 2018, Michael Osborne from Reliable Controls, became chair after serving 3 years as secretary and 3 years as vice chair.

Protocol overview

The BACnet protocol defines a number of services that are used to communicate between building devices. The protocol services include Who-Is, I-Am, Who-Has, I-Have, which are used for Device and Object discovery. Services such as Read-Property and Write-Property are used for data sharing. As of ANSI/ASHRAE 135-2016, the BACnet protocol defines 60 object types that are acted upon by the services.

The BACnet protocol defines a number of data link and physical layers, including ARCNET, Ethernet, BACnet/IP, BACnet/IPv6, BACnet/MSTP, point-to-point over RS-232, multidrop serial bus with token passing over RS-485, Zigbee, and LonTalk.

BACnet objects

ANSI/ASHRAE 135-2016 specifies 60 standard object types:

BACnet testing

BACnet Testing Laboratories ("BTL") was established by BACnet International to test products to BACnet standards and support compliance testing and interoperability testing activities and consists of BTL Manager and the BTL working group ("BTL-WG"). The general activities of the BTL are:

The BTL also provides testing services through BACnet Laboratories. The BTL Managers and BTL working groups of BACnet International administer the test Laboratories. All BTL-recognized BACnet Test Organizations are ISO 17025 accredited.

In January, 2017, a new BTL certification program was announced. Under this program, the work of the BTL and WSPCert (the European BACnet certification body) is merged. This merger forms a single point of testing for both the BTL Mark and the Certificate of Conformance.

Related Research Articles

IEEE 802.2 is the original name of the ISO/IEC 8802-2 standard which defines logical link control (LLC) as the upper portion of the data link layer of the OSI Model. The original standard developed by the Institute of Electrical and Electronics Engineers (IEEE) in collaboration with the American National Standards Institute (ANSI) was adopted by the International Organization for Standardization (ISO) in 1998, but it remains an integral part of the family of IEEE 802 standards for local and metropolitan networks.

<span class="mw-page-title-main">KNX</span> Standard in building automation

KNX is an open standard for commercial and residential building automation. KNX devices can manage lighting, blinds and shutters, HVAC, security systems, energy management, audio video, white goods, displays, remote control, etc. KNX evolved from three earlier standards; the European Home Systems Protocol (EHS), BatiBUS, and the European Installation Bus.

A distributed control system (DCS) is a computerised control system for a process or plant usually with many control loops, in which autonomous controllers are distributed throughout the system, but there is no central operator supervisory control. This is in contrast to systems that use centralized controllers; either discrete controllers located at a central control room or within a central computer. The DCS concept increases reliability and reduces installation costs by localising control functions near the process plant, with remote monitoring and supervision.

HVAC equipment needs a control system to regulate the operation of a heating and/or air conditioning system. Usually a sensing device is used to compare the actual state with a target state. Then the control system draws a conclusion what action has to be taken.

LonWorks or Local Operating Network is an open standard for networking platforms specifically created to address the needs of control applications. The platform is built on a protocol created by Echelon Corporation for networking devices over media such as twisted pair, power lines, fiber optics, and wireless. It is used for the automation of various functions within buildings such as lighting and HVAC; see building automation.

RS-485, also known as TIA-485(-A) or EIA-485, is a standard, originally introduced in 1983, defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The standard is jointly published by the Telecommunications Industry Association and Electronic Industries Alliance (TIA/EIA). Digital communications networks implementing the standard can be used effectively over long distances and in electrically noisy environments. Multiple receivers may be connected to such a network in a linear, multidrop bus. These characteristics make RS-485 useful in industrial control systems and similar applications.

A fieldbus is a member of a family of industrial digital communication networks used for real-time distributed control. Fieldbus profiles are standardized by the International Electrotechnical Commission (IEC) as IEC 61784/61158.

LonTalk is a networking protocol. Originally developed by Echelon Corporation for networking devices over media such as twisted pair, powerlines, fiber optics, and RF. It is popular for the automation of various functions in industrial control, home automation, transportation, and buildings systems such as lighting and HVAC, the protocol has now been adopted as an open international control networking standard in the ISO/IEC 14908 family of standards. Published through ISO/IEC JTC 1/SC 6, this standard specifies a multi-purpose control network protocol stack optimized for smart grid, smart building, and smart city applications.

Actuator Sensor Interface is an industrial networking solution used in PLC, DCS and PC-based automation systems. It is designed for connecting simple field I/O devices in discrete manufacturing and process applications using a single two-conductor cable.

Building automation (BAS), also known as building management system (BMS) or building energy management system (BEMS), is the automatic centralized control of a building's HVAC, electrical, lighting, shading, access control, security systems, and other interrelated systems. Some objectives of building automation are improved occupant comfort, efficient operation of building systems, reduction in energy consumption, reduced operating and maintaining costs and increased security.

Direct digital control is the automated control of a condition or process by a digital device (computer). Direct digital control takes a centralized network-oriented approach. All instrumentation is gathered by various analog and digital converters which use the network to transport these signals to the central controller. The centralized computer then follows all of its production rules and causes actions to be sent via the same network to valves, actuators, and other heating, ventilating, and air conditioning components that can be adjusted.

oBIX is a standard for RESTful Web Services-based interfaces to building control systems. oBIX is about reading and writing data over a network of devices using XML and URIs, within a framework specifically designed for building automation.

In the field of Industrial Control Systems, the interfacing of various control components must provide means to coordinate the signals and commands sent between control modules. While tight coordination is desirable for discrete inputs and outputs, it is especially important in motion controls, where directing the movement of individual axes of motion must be precisely coordinated so that the motion of the entire system follows a desired path. Types of equipment requiring such coordination include metal cutting machine tools, metal forming equipment, assembly machinery, packaging machinery, robotics, printing machinery and material handling equipment. The Sercos interface is a globally standardized open digital interface for the communication between industrial controls, motion devices (drives) and input output devices (I/O). Sercos I and II are standardized in IEC 61491 and EN 61491. Sercos III is specified in standards IEC 61800-7; IEC 61784-1, -2, -3 and IEC 61158. Sercos is designed to provide hard real-time, high performance communications between industrial motion controls and digital servo drives.

ANSI/ASHRAE/IES Standard 90.1: Energy Standard for Buildings Except Low-Rise Residential Buildings is an American National Standards Institute (ANSI) standard published by ASHRAE and jointly sponsored by the Illuminating Engineering Society (IES) that provides minimum requirements for energy efficient designs for buildings except for low-rise residential buildings. The original standard, ASHRAE 90, was published in 1975. There have been multiple editions to it since. In 1999 the ASHRAE Board of Directors voted to place the standard on continuous maintenance, based on rapid changes in energy technology and energy prices. This allows it to be updated multiple times in a year. The standard was renamed ASHRAE 90.1 in 2001. It has since been updated in 2004, 2007, 2010, 2013, 2016, and 2019 to reflect newer and more efficient technologies.

<span class="mw-page-title-main">KMC Controls</span>

KMC Controls has designed and manufactured HVAC control system products and building automation systems since 1969. KMC was one of the early privately held controls manufacturer with a full line of digital, electronic, and pneumatic products in the United States. The latest products include BACnet digital controllers and thermostats.

<span class="mw-page-title-main">ASHRAE</span> American HVAC professional association

The American Society of Heating, Refrigerating and Air-Conditioning Engineers is an American professional association seeking to advance heating, ventilation, air conditioning and refrigeration (HVAC&R) systems design and construction. ASHRAE has over 50,000 members in more than 130 countries worldwide.

ANSI/ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy is an American National Standard published by ASHRAE that establishes the ranges of indoor environmental conditions to achieve acceptable thermal comfort for occupants of buildings. It was first published in 1966, and since 2004 has been updated every three to six years. The most recent version of the standard was published in 2023.

A smart home hub, sometimes also referred to as a "smart hub", "gateway'", "bridge", "controller" or "coordinator", is a control center/centre for a smart home, and enables the components of a smart home to communicate and respond to each other via communication through a central point. The smart home hub can consist of dedicated computer appliance, software appliance, or software running on computer hardware, and makes it possible to gather configuration, automation and monitoring of a smart house by communicating and controlling different smart devices that consist of for example home appliances, sensors and relays or robots, many of which are commonly categorized under Internet of things.

References

  1. ↑ "Standard 135-2016-- BACnet--A Data Communication Protocol for Building Automation and Control Networks (ANSI Approved)" (Document). ASHRAE. 2016.
  2. ↑ SPC 135P (June 26, 1987). "Minutes of the First SPC 135P Meeting" (PDF). ASHRAE. Archived from the original (PDF) on 2022-02-05. Retrieved August 7, 2017.{{cite web}}: CS1 maint: numeric names: authors list (link)
  3. ↑ Newman, Michael (2013). "2.9.1 ALERTON". BACnet. New York: Momentum Press. ISBN   9781606502907. OCLC   909981984 – via Google Books.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.