Chicago, Burlington and Quincy Railroad

Last updated

Chicago, Burlington and Quincy Railroad
Burlingtonroute.png
Burlington Route System Map.png
Burlington Route system map
Texas Zephyr.JPG
Texas Zephyr postcard
Overview
Headquarters Chicago, Illinois
Founders John Murray Forbes
James Frederick Joy [1]
Reporting mark CBQ
Locale Colorado, Illinois, Iowa, Kansas, Kentucky, Minnesota, Missouri, Montana, Nebraska, New Mexico, South Dakota, Texas, Wisconsin, and Wyoming
Dates of operation18551970
Successor Burlington Northern Railroad
Technical
Track gauge 4 ft 8+12 in (1,435 mm) standard gauge

The Chicago, Burlington and Quincy Railroad( reporting mark CBQ) was a railroad that operated in the Midwestern United States. Commonly referred to as the Burlington Route, the Burlington, CB&Q, or as the Q, [2] [3] it operated extensive trackage in the states of Colorado, Illinois, Iowa, Missouri, Nebraska, Wisconsin, Wyoming, and also in Texas through subsidiaries Colorado and Southern Railway, Fort Worth and Denver Railway, and Burlington-Rock Island Railroad.[ citation needed ] Its primary connections included Chicago, Minneapolis–Saint Paul, St. Louis, Kansas City, and Denver. Because of this extensive trackage in the midwest and mountain states, the railroad used the advertising slogans "Everywhere West", "Way of the Zephyrs", and "The Way West".

Contents

In 1967, it reported 19,565 million net ton-miles of revenue freight and 723 million passenger miles; corresponding totals for C&S were 1,100 and 10 and for FW&D were 1,466 and 13. At the end of the year, CB&Q operated 8,538 route-miles, C&S operated 708, and FW&D operated 1,362 (these totals may or may not include the former Burlington-Rock Island Railroad). In 1970, it merged with the Northern Pacific Railway and the Great Northern Railway to form the Burlington Northern Railroad.

History

1848–1882

The earliest predecessor of the Chicago, Burlington and Quincy, the Aurora Branch Railroad, was chartered by act of the Illinois General Assembly on October 2, 1848. The charter was obtained by citizens of Aurora and Batavia, Illinois, who were concerned that the Galena and Chicago Union Railroad would bypass their towns in favor of West Chicago on its route; at the time, that was the only line running west from Chicago. The Aurora Branch was built from Aurora, through Batavia, to Turner Junction in what is now West Chicago. The line was built with old strap rail and minimal, if any, grading. Using a leased locomotive and cars, the Aurora Branch ran passenger and freight trains from Aurora to Chicago via its own line from Aurora to Turner Junction and one of the G&CU's two tracks east from there to Chicago. The G&CU required the Aurora Branch to turn over 70 percent of their revenue per ton-mile handled on that railroad; as a result, in the mid-1850s, surveys were ordered to determine the best route for a railroad line to Chicago. [4]

The line from Aurora to Chicago was built through the fledgling towns of Naperville, Lisle, Downers Grove, Hinsdale, Berwyn, and the west side of Chicago. It was opened in 1864, and passenger and freight service began. Regular commuter train service started in 1864 and remains operational to this day, making it the oldest surviving regular passenger service in Chicago. Both the original Chicago line, and to a much lesser extent, the old Aurora Branch right of way, are still in regular use today by the Burlington's present successor BNSF Railway.

The company was renamed Chicago and Aurora Railroad on June 22, 1852, and given expanded powers to extend from Aurora to a point north of LaSalle; [5] this extension, to Mendota, was completed on October 20, 1853. Another amendment, passed February 28, 1854, authorized the company to build east from Aurora to Chicago via Naperville, and changed its name to Chicago and Southwestern Railroad. [6] The latter provision was never acted upon, [7] and was repealed by an act of February 14, 1855, which instead reorganized the line as the Chicago, Burlington and Quincy Railroad. [8] The new railroad was formed by the consolidation of the Chicago and Aurora Railroad, the Central Military Tract, the west end of the Peoria & Oquawka, and the Northern Cross Railroad companies. [9] With a steady acquisition of locomotives, cars, equipment, and trackage, the Burlington Route was able to enter the trade markets in 1862. From that year to date, the railroad and its successors have paid dividends continuously, and never run into debt or defaulted on a loan—the only Class I U.S. railroad for which this is true.

Chicago, Burlington & Quincy Railroad Stock Certificate 1887.jpg

After extensive trackwork was planned, the Aurora Branch changed its name to the Chicago and Aurora Railroad in June 1852, [10] and to Chicago, Burlington, and Quincy Railroad in 1856, and shortly reached its two other namesake cities, Burlington, Iowa, and Quincy, Illinois. In 1868 CB&Q completed bridges over the Mississippi River at both Burlington and Quincy, giving the railroad through connections with the Burlington and Missouri River Railroad (B&MR) in Iowa and the Hannibal & St. Joseph Railroad (H&StJ) in Missouri. In 1860 the H&SJ carried the mail to the Pony Express upon reaching the Missouri River at St. Joseph, Missouri. In 1862 The first Railway Post Office was inaugurated on the H&StJ to sort mail on the trains way across Missouri.

The B&MR continued building west into Nebraska as a separate company, the Burlington & Missouri River Rail Road, founded in 1869. During the summer of 1870 it reached Lincoln, the newly designated capital of Nebraska and by 1872 it reached Kearney, Nebraska. That same year the B&MR across Iowa was absorbed by the CB&Q. By the time the Missouri River bridge at Plattsmouth, Nebraska, was completed the B&MR in Nebraska was well on its way to Denver. That same year, the Nebraska B&MR was purchased by the CB&Q, which completed the line to Denver by 1882. [11] [ page needed ]

Early repair shops for rolling stock were built by the Aurora Branch Railroad in Chicago, but the first true shop site was established at Aurora, Illinois in 1855. These were capable of repairing and building locomotives, freight cars, and passenger cars. Other shop sites were established or inherited from predecessor lines as the system grew. By the early 1900s, the shops at Aurora served the Chicago Division, the shops in Galesburg, Illinois served the Galesburg Division, the shops in Hannibal, Missouri served the St. Louis Division, the shops in West Burlington, Iowa and in Creston, Iowa served the Iowa Division, and the shops in Denver, Colorado served the McCook and Red Cloud Divisions. The latter were the final steam era shops built for the CB&Q, completed in 1922. [12]

1882–1901

Burlington's rapid expansion after the American Civil War was based upon sound financial management, dominated by John Murray Forbes of Boston and assisted by Charles Elliott Perkins. Perkins was a powerful administrator who eventually forged a system out of previously loosely held affiliates, virtually tripling Burlington's size during his presidency from 1881 to 1901.

Burlington Route system map, 1892. Burlington lines are black; connecting railroads are red. Burlington Route Map 1892.png
Burlington Route system map, 1892. Burlington lines are black; connecting railroads are red.

Ultimately, Perkins believed the Burlington Railroad must be included into a powerful transcontinental system. Though the railroad stretched as far west as Denver and Billings, Montana, it had failed to reach the Pacific Coast during the 1880s and 1890s, when construction was less expensive. Though approached by E. H. Harriman of the Union Pacific Railroad, Perkins felt his railroad was a more natural fit with James J. Hill's Great Northern Railway. With its river line to the Twin Cities, the Burlington Route formed a natural connection between Hill's home town (and headquarters) of St. Paul, Minnesota, and the railroad hub of Chicago. Moreover, Hill was willing to meet Perkins' $200-a-share asking price for the Burlington's stock. By 1900, Hill's Great Northern, in conjunction with the Northern Pacific Railway, held nearly 100 percent of Burlington's stock.

By 1899, the company had rostered 1,205 locomotives, 936 passenger cars and 40,720 freight cars. [13]

In 1901, a rebuffed Harriman tried to gain an indirect influence over the Burlington by launching a stock raid on the Northern Pacific. Though Hill managed to fend off this attack on his nascent system, it led to the creation of the Northern Securities Company, and later, the Northern Securities Co. v. United States ruling by the U.S. Supreme Court.

Burlington strike of 1888

The only major strike in the line's history came in 1888, the Burlington railway strike of 1888. Unlike most strikes, which were based on unskilled workers, this one was based on the highly skilled well-paid engineers and firemen, a challenge to management prerogatives. A settlement would have been much cheaper, but President Perkins was determined to assert ownership rights and destroy the union threat. The fight dragged on 10 months before the financially and emotionally exhausted strikers finally gave up, and Perkins declared a total victory. However, he had spent heavily on strikebreakers, lawsuits, and police protection, hurting the balance sheets and putting the railroad in a poor position to face the nationwide depression of the Panic of 1893. [14] [ page needed ] [15] [16]

1901–1945

Chicago, Burlington and Quincy 4-6-0 steam locomotive 710 on static display at Iron Horse Park. Chicago Burlington Quincy Locomotive 710 (3).JPG
Chicago, Burlington and Quincy 4-6-0 steam locomotive 710 on static display at Iron Horse Park.

Following the purchase of the Burlington by GN and NP, expansion continued. In 1908, the CB&Q purchased both the Colorado and Southern Railway and the Fort Worth and Denver Railway, giving it access south to Dallas and the Gulf of Mexico ports in Houston and Galveston.[ citation needed ] It also extended its reach south in the Mississippi Valley region by opening up a new line from Concord, Illinois, south to Paducah, Kentucky. It was during this period that the Burlington was at its largest, exceeding just over 12,000 route miles in 14 states by the 1920s. [17] With the First World War having the same effect on the railroad as on all other railroads, during the 1920s, the Burlington Route had an increasingly heavy amount of equipment flooding the yards. With the advent of the Great Depression, the CB&Q held a good portion of this for scrap.

In 1929, the CB&Q created a subsidiary, the Burlington Transportation Company, to operate intercity buses in tandem with its railway network. On January 1, 1932, the CB&Q received a new president; former Great Northern Railroad president Ralph Budd. [18] By which time, the CB&Q was facing a decline in passenger ridership from the Depression, and U.S. President Franklin D. Roosevelt was exploring ways to help the rail industry improve. [18] Ralph Budd subsequently asked for a streamlined stainless-steel train to be built, and this resulted in the railroad introducing the famous Zephyrs . [18] As early as 1897, the railroad invested in alternatives to steam power, namely, internal-combustion engines. The railroad's shops in Aurora had built a three-horsepower distillate motor in that year, but it was not reliable (requiring a massive 6,000-pound flywheel), and it had issues with overheating (even with the best metals of the day, its cylinder heads and liners would warp and melt in a matter of minutes), so it was therefore deemed impractical. Diesel engines of that era were obese, stationary monsters and were best suited for low-speed, continuous operation.

A Zephyr arriving at East Dubuque, Illinois The Burlington Zephyr. East Dubuque, Illinois, LOC image.jpg
A Zephyr arriving at East Dubuque, Illinois

It was not reliable for a railroad locomotive; there was no diesel engine suitable for that purpose then. Always innovating, the railroad purchased "doodlebug" gas-electric combine cars from Electro-Motive Corporation (EMC) and built their own, sending them out to do the jobs of a steam locomotive and a single car. After the positive results the doodlebug cars created, and after having purchased and used three General Electric steeple-cab switchers powered by distillate engines, Ralph Budd requested the Winton Engine Company to design and construct a light, powerful diesel engine that could stand the rigors of continuous, unattended daily service.

Burlington locomotive hauling an express freight c. 1967. These locomotives were also used for the Zephyr passenger trains. Burlington locomotive 1967.JPG
Burlington locomotive hauling an express freight c.1967. These locomotives were also used for the Zephyr passenger trains.

The experiences of developing these engines can be summed up shortly by General Motors Research vice-president Charles Kettering: "I do not recall any trouble with the dip stick." Ralph Budd, accused of gambling on diesel power, chirped that "I knew that the GM people were going to see the program through to the very end. Actually, I wasn't taking a gamble at all." The manifestation of this gamble was the eight-cylinder Winton 8-201A engine that powered the Burlington Zephyr (built 1934) on its record-breaking run, and it opened the door for developing the long line of diesel engines that has powered Electro-Motive locomotives for the next seventy years. [19] In 1936, the CB&Q would become one of the founding members of the Trailways Transportation System, and still provides intercity service to this day as Burlington Trailways. [20] [21]

1940 was the final year the CB&Q added steam locomotives to their roster, having completed construction on their O-5A class locomotives at the West Burlington, Iowa shops. [22] With their freight traffic weighing 31 million tons that year, the CB&Q saw no further necessity for any more steam or diesel locomotives to be added to their roster. [22] In 1942, following the United States' entrance into World War II, the railroad's freight traffic increased to 49 million tons, with Ralph Budd (now named President Roosevelt's federal transportation commissioner) poised to ensure his company would help the war effort. [18] [22] In 1943, the War Production Board authorized EMC (now reincorporated as EMD) to construct sixteen FT locomotives for delivery to the CB&Q the following year, by which time, the road's freight traffic peaked 57 million tons. [22]

1945–1970

After World War II ended, the CB&Q began ordering additional diesel locomotives from EMD, as part of a $140-million program to dieselize their roster. [22] [23] August 31, 1949, was Ralph Budd's final day as president of the railroad before he would retire during that year's Chicago Railroad Fair, and Harry C. Murphy succeeded him in September. [18] [23] Dieselization of the CB&Q's commercial passenger operations was completed on September 26, 1952, when the last of the 4-6-2 locomotives that operated for the Chicago-Aurora suburban service were retired; the remaining steam locomotives on the CB&Q were primarily reassigned as freight haulers and yard switchers. [22] [24] The first division on the CB&Q to be fully dieselized was the Casper Division in Wyoming, where EMD GP7 road switchers were delivered in 1951. [22]

Chicago, Burlington and Quincy steam locomotives 4960 and 5632 sitting inside the Clyde Roundhouse on August 22, 1962 Two CB&Q Gems from Roger Puta's Reject Box (25089251853).jpg
Chicago, Burlington and Quincy steam locomotives 4960 and 5632 sitting inside the Clyde Roundhouse on August 22, 1962

In 1955, regular performance on class 3 overhauls on steam locomotives were discontinued, and Harry C. Murphy opted for the railroad's remaining steam fleet to use up their previously-restored mileage throughout the next year. [25] [26] [27] By which time, the majority of the Burlington's steam fleet were relegated to operate east of Lincoln, Nebraska, with only two steam locomotives held for back-up service west of Lincoln. [26] The final division on the CB&Q to be fully dieselized was the Beardstown Division in Southern Illinois, where 2-8-2 locomotive No. 4997 worked the last commercial steam assignment for the railroad at Herrin Junction on January 27, 1959 (the only major U.S. railroads to operate revenue steam after this date were Union Pacific, Illinois Central, Nickel Plate Road, Norfolk and Western, Grand Trunk Western, Duluth, Missabe and Iron Range, and Lake Superior and Ishpeming). [28] [27] CB&Q subsidiary Colorado and Southern eventually ended their commercial steam operations on October 11, 1962, when 2-8-0 No. 641 pulled a final freight train on the Leadville-Climax branch in Colorado. [28]

On July 1, 1965, Harry Murphy retired from his position as president of the CB&Q (he remained on the railroad as a director until October), and former Frisco Railway president Louis W. Menk took over as president and CEO. [23] [29] [30] During his presidency, Louis Menk explored ways to reduce costs for the CB&Q's passenger operations and to reshape the road's freight operations. [29] [30] Passenger service was markedly reduced, as people had shifted to using private automobiles for transportation. [31] In late 1966, Louis Menk became president of the Northern Pacific, leaving William John Quinn in charge of the CB&Q. [30] [32]

As the financial situation of American railroading continued to decline throughout the 1960s, forcing restructuring across the country, the CB&Q merged with the Great Northern, Northern Pacific, and the Spokane, Portland and Seattle (SP&S) railroads on March 2, 1970, to form the Burlington Northern Railroad (BN), with Louis Menk serving as the company's first president and CEO (twenty-six years later, the BN and Santa Fe Railroads merged to become the Burlington Northern and Santa Fe Railway (BNSF)). [31] [30] Most passenger operations would be assumed in 1971 by Amtrak. [31]

CB&Q 528, a brand-new EMD SD45 in 1969, with an experimental paint scheme that would later be adopted by the Burlington Northern the following year, albeit in a different form At River Rd west of Naperville, IL on April 6, 1969 (22355263661).jpg
CB&Q 528, a brand-new EMD SD45 in 1969, with an experimental paint scheme that would later be adopted by the Burlington Northern the following year, albeit in a different form

Steam program

Beginning in the summer of 1955, the CB&Q hosted a series of occasional steam excursion trains per request of railfan clubs, such as the Illinois Railroad Club. [25] [33] Harry C. Murphy was a steam fan who recognized the popularity in steam locomotives, and he authorized additional steam excursion trains to take place on the railroad throughout the late 1950s and early 1960s. [27] [34] Twenty-one steam locomotives of varying classes took part in the CB&Q's new steam excursion program, only two of which remained operational by 1961: 2-8-2 No. 4960 and 4-8-4 No. 5632. [34] [35] In 1962, the CB&Q's passenger department began sponsoring the excursion runs by offering ticket discounts to paying customers, and the Burlington began to host several school trains for school students. [34] [35]

In 1964, steam excursion operations on the railroad had dwindled, in the wake of rising operation and maintenance costs and a loss of experienced steam locomotive mechanics; the only factors that kept the CB&Q's steam program going were public demand and Harry Murphy's passion for steam. [33] [36] [37] [29] In the process of reducing operating costs for the railroad, Harry Murphy's successor, Louis Menk, ordered for the CB&Q's steam excursion program to be shut down by August 1, 1966. [29] Despite a subsequent public outcry and protest over the program's cancellation, the No. 4960 locomotive pulled the railroad's final excursion train on July 17. [36] [29]

The Burlington Zephyrs

The passengers, including "Zeph" the burro, that rode the Zephyr on the "Dawn-to-Dusk Dash" gather for a group photo in front of the train after arriving in Chicago on May 26, 1934. Pioneer Zephyr Dawn to Dusk Club.jpg
The passengers, including "Zeph" the burro, that rode the Zephyr on the "Dawn-to-Dusk Dash" gather for a group photo in front of the train after arriving in Chicago on May 26, 1934.
The Alton-Burlington Ozark State Zephyr in 1936. Ozark State Zephyr certificate 1936.JPG
The Alton-Burlington Ozark State Zephyr in 1936.

The railroad operated a number of streamlined passenger trains known as the Zephyrs which were one of the most famous and largest fleets of streamliners in the United States. The Burlington Zephyr, the first American diesel-electric powered streamlined passenger train, made its noted "dawn-to-dusk" run from Denver, Colorado, to Chicago, Illinois, on May 26, 1934. On November 11, 1934, the train was put into regularly scheduled service between Lincoln, Nebraska, and Kansas City, Missouri. [38] Although the distinctive, articulated stainless steel trains were well known, and the railroad adopted the "Way of the Zephyrs" advertising slogan, they did not attract passengers back to the rails en masse, and the last one was retired from revenue service with the advent of Amtrak. [39] [ page needed ]

The Zephyr fleet included: [40] [ page needed ] [39] [ page needed ]

Other named passenger trains which operated on the Burlington included: [41]

These trains were operated jointly with Northern Pacific Railway and had a different name when they were east or westbound. Northern Pacific and Atlantic Express Burlington and Northern Pacific 1912.jpg
These trains were operated jointly with Northern Pacific Railway and had a different name when they were east or westbound.
The club car of the Chicago Limited and the Denver Limited. The train had an eastbound and westbound name. Club car Denver and Chicago Limited Burlington Route 1915.JPG
The club car of the Chicago Limited and the Denver Limited. The train had an eastbound and westbound name.

The California Zephyr is still operated daily by Amtrak as trains Five (westbound) and Six (eastbound). Another Amtrak train, the Illinois Zephyr , is a modern descendant of the Kansas City Zephyr and the American Royal Zephyr services. [39] [ page needed ]

Preserved locomotives

Multiple locomotives from the Burlington have been preserved, including two Zephyr power units, thirty-five steam locomotives, and thirty-four diesel locomotives. [45] [46]

Originally, 5632 (O-5B 4-8-4) was preserved, but later scrapped.

Innovations

The Burlington was a leader in innovation; among its firsts were use of the printing telegraph (1910), train radio communications (1915), streamlined passenger diesel power (1934) and vista-dome coaches (1945). In 1927, the railroad was one of the first to use Centralized Traffic Control (CTC) and by the end of 1957 had equipped 1,500 miles (2,400 km) of its line. It played a central role in bringing air brakes to freight service. [72]

The railroad had one of the first hump classification yards at its Cicero Avenue Yard in Chicago, allowing an operator in a tower to line switches remotely and allowing around-the-clock classification. The company also tested the twin cylinder car.

Cities platted by the Chicago, Burlington and Quincy Railroad

See also

Notes

  1. Douglas, George H. (2007). "Joy, James F. (1810-1896)". In Middleton, William D.; Smerk, George M.; Diehl, Roberta L. (eds.). Encyclopedia of North American Railroads. Indiana University Press. p. 569.
  2. "Chicago Burlington & Quincy Station". Rock Island Preservation Society. February 2013. Retrieved September 6, 2015.
  3. "Burlington & M. R. R. Co. in Nebraska v. Burch; Court of Appeals of Colorado, May 12, 1902". The American and English Railroad Cases: A Collection of All Cases Affecting Railroads of Every Kind, Decided by the Courts of Appellate Jurisdiction in the United States, England, and Canada. Vol. 27. E. Thompson. 1903. pp. 21–26. Retrieved September 6, 2015 via Google Books.
  4. Newton, A.W. (1948). "Early History of the Chicago, Burlington & Quincy Railroad in Illinois". The Railway and Locomotive Historical Society Bulletin. No. 74. pp. 7–22. JSTOR   43520021 via JStor.
  5. Illinois (June 22, 1852). An act to amend the charter of the Aurora Branch Railroad company via Google Books.
  6. Illinois (February 28, 1854). An act to amend the charter of the Chicago and Aurora Railroad Company via Google Books.
  7. Chicago, Burlington and Quincy Railroad (1917). Corporate History of the Chicago, Burlington & Quincy Railroad Company and Affiliated Companies. p. 8. A provision of the Amendment, of date February 28, 1854, which changed the name of this company to "Chicago and Southwestern Railroad Company," was never acted upon or recognized by this company.
  8. Illinois (February 14, 1855). An act to amend an act entitled "An act to amend the charter of the Chicago and Aurora Railroad Company, approved February 28, 1854 via Google Books.
  9. Andreas, Alfred Theodore (1884). History of Cook County, Illinois: From the Earliest Period to the Present Time. A.T. Andreas. p. 180.
  10. Dorin (1976), p. 9.
  11. Daniels, Rudolph L. (2000). Trains across the continent: North American railroad history. Indiana UP.
  12. Starr, Timothy. The Back Shop Illustrated, Vol. 2.
  13. Evolution of the railway, Triumphs and wonders of the 19th century, A. J. Holman & Co., 1899; p. 645.
  14. McMurry (1956).
  15. White, Richard (2011). Railroaded: The transcontinental's and the making of modern America. pp. 336–347.
  16. Overton (1965), pp. 206–217.
  17. Dorin (1976), p. 10.
  18. 1 2 3 4 5 "Biography: Ralph Budd". PBS. Retrieved December 14, 2012.
  19. "The Pioneer Zephyr". ASME. Archived from the original on October 24, 2015. Retrieved January 17, 2017.
  20. Schwantes (2003), p. 187.
  21. Yago (1984), p. 172.
  22. 1 2 3 4 5 6 7 Stagner (1997) , p. 3
  23. 1 2 3 "HARRY C. MURPHY; HEADED RAILROAD; Was President of Chicago Burlington & Quincy". The New York Times. March 5, 1967. p. 87. Retrieved March 25, 2023.
  24. Stagner (1997) , p. 7
  25. 1 2 Stagner (1997) , p. 9
  26. 1 2 Stagner (1997) , p. 11
  27. 1 2 3 Stagner (1997) , p. 15
  28. 1 2 Stagner (1997) , p. 4
  29. 1 2 3 4 5 Stagner (1997) , p. 22
  30. 1 2 3 4 Saxon, Wolfgang (November 27, 1999). "Louis Menk, Railroad Executive, Dies at 81". The New York Times. ISSN   0362-4331 . Retrieved March 17, 2023.
  31. 1 2 3 Lennon, J. Establishing Trails on Rights-of-Way. Washington, D.C.: United States Department of the Interior. p. 50.
  32. "William J. Quinn, railroad executive, dies at 104". Chicago Tribune. November 18, 2015. Retrieved March 22, 2023.
  33. 1 2 Stowe (1966) , p. 3
  34. 1 2 3 Stowe (1966) , p. 4
  35. 1 2 Stagner (1997) , p. 17
  36. 1 2 Stowe (1966) , p. 5
  37. Stagner (1997) , p. 18
  38. Donovan, Frank P. (1969). "Way of the Zephyrs". The Palimpsest. Vol. 50, no. 9. pp. 526–533.
  39. 1 2 3 Zimmermann (2004).
  40. Doughty, Geoffrey H. (2002). Burlington Route: The Early Zephyrs.
  41. Dorin (1976)  Chapters 2, 4, 5. pp. 14–29, 36–77, 78–90.
  42. 1 2 "A Marvelous Vacation in Cool Colorado (ad for the Denver Zephyr)". Life Magazine. April 19, 1937. p. 79. Retrieved February 26, 2012 via Google Books.
  43. Mann, Charles F.A. (September 17, 1935). "Most Powerful Diesel Ready for Rail Service". The Meriden Daily Journal. Retrieved March 28, 2012 via Google News.
  44. "The Scenic Way to California (ad for the Exposition Flyer)". Life Magazine. April 21, 1941. Retrieved February 26, 2012 via Google Books.
  45. "Burlington Route Historical Society - Roster". www.burlingtonroute.org. Retrieved December 31, 2021.
  46. "Burlington Route Historical Society - Roster". www.burlingtonroute.org. Retrieved December 31, 2021.
  47. "CBQ A2 #35 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  48. "Historic U28B diesel locomotive acquired". Illinois Railway Museum. Retrieved December 31, 2021.
  49. "IRM Photo Gallery :: CB&Q 504 Restoration". www.irm.org. Retrieved December 31, 2021.
  50. "Flickriver: Most interesting photos tagged with cbq504". www.flickriver.com. Retrieved December 31, 2021.
  51. "Chicago Railroad Fair - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  52. "Illinois Railway Museum Train Shed - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  53. "CBQ K-4 #710 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  54. "CBQ G-3 #1548 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  55. "CBQ S-4 #3001 - www.rgusrail.com". www.rgusrail.com. Retrieved January 24, 2022.
  56. "CBQ S-4 #3003 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  57. "CBQ S-4 #3006 - www.rgusrail.com". www.rgusrail.com. Retrieved January 24, 2022.
  58. "Illinois Railway Museum Yard - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  59. "Illinois Railway Museum Train Shed - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  60. "A Passion for Steam". The Trackside Photographer. March 18, 2021. Retrieved December 31, 2021.
  61. "CBQ O-1A #4978 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  62. "CBQ O1-A #4994 - www.rgusrail.com". www.rgusrail.com. Retrieved January 24, 2022.
  63. "CBQ O-5a #5614 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  64. "CBQ O-5A #5631". rgusrail.com. Retrieved June 5, 2021.
  65. "CBQ O-5A #5633 - www.rgusrail.com". www.rgusrail.com. Retrieved December 31, 2021.
  66. "Gopher State Railway Museum - Roster of Equipment". www.gsrm.org. Retrieved December 31, 2021.
  67. "IRM Roster - Chicago Burlington & Quincy 9255". www.irm.org. Retrieved December 31, 2021.
  68. "Pictures of CBQ 9903". www.rrpicturearchives.net. Retrieved December 31, 2021.
  69. "Chicago Burlington & Quincy 9976". Illinois Railway Museum. Retrieved December 31, 2021.
  70. "IRM Roster - Burlington Northern BN-3". www.irm.org. Retrieved December 31, 2021.
  71. "What's Here, exhibits, Pioneer Zephyr".
  72. Steven W. Usselman, "Air brakes for freight trains: technological innovation in the American railroad industry, 1869–1900." Business History Review 58.1 (1984): 30-50.
  73. 2018-2019 Cass County Fact Book (PDF). Atlantic News Telegraph. p. 20.{{cite book}}: |website= ignored (help)
  74. History of Mills County, Iowa: Containing a History of the County, Its Cities, Towns, Etc. State Historical Company. 1881. p. 590 via Google Books.

Related Research Articles

<i>California Zephyr</i> (1949–1970) Passenger train operated from 1949 to 1970 in the U.S.

The California Zephyr was a passenger train that ran between Chicago, Illinois, and Oakland, California, via Omaha, Denver, Salt Lake City, Winnemucca, Oroville and Pleasanton in the United States. It was operated by the Chicago, Burlington & Quincy (CB&Q), Denver & Rio Grande Western (D&RGW) and Western Pacific (WP) railroads, all of which dubbed it "the most talked about train in America" on March 19, 1949, with the first departure the following day. The train was scheduled to pass through the most spectacular scenery on its route in the daylight. The original train ceased operation in 1970, though the D&RGW continued to operate its own passenger service, the Rio Grande Zephyr, between Salt Lake City and Denver, using the original equipment until 1983. In 1983 a second iteration of the California Zephyr, an Amtrak service, was formed. The current version of the California Zephyr operates partially over the route of the original Zephyr and partially over the route of its former rival, the City of San Francisco.

<span class="mw-page-title-main">EMD E5</span>

The EMD E5 is a 2,000-horsepower (1,500 kW), A1A-A1A passenger train-hauling diesel locomotive manufactured by Electro-Motive Corporation, and its corporate successor, General Motors' Electro-Motive Division (EMD) of La Grange, Illinois, and produced exclusively for the Chicago, Burlington and Quincy Railroad, and its subsidiaries, during 1940 and 1941. The E5 was distinguished from the otherwise very similar E3, E4 and E6 by being clad in polished stainless steel to match the Burlington's Zephyr trains. It also featured unique small grill-like ornamentation on both sides of the upper headlight. Like the other pre-war models in the E-series, the E5 had a sloping “slant nose” and it was equipped with two headlights — a regular stationary headlight above a gyrating Mars signal light. The E5 was the sixth in the EMD E-unit series.

<span class="mw-page-title-main">Chicago and North Western Transportation Company</span> Rail transport company

The Chicago and North Western was a Class I railroad in the Midwestern United States. It was also known as the "North Western". The railroad operated more than 5,000 miles (8,000 km) of track at the turn of the 20th century, and over 12,000 miles (19,000 km) of track in seven states before retrenchment in the late 1970s. Until 1972, when the employees purchased the company, it was named the Chicago and North Western Railway.

<span class="mw-page-title-main">Dome car</span> American panoramic rail coach with en external dome

A dome car is a type of railway passenger car that has a glass dome on the top of the car where passengers can ride and see in all directions around the train. It also can include features of a coach, lounge car, dining car, sleeping car or observation. Beginning in 1945, dome cars were primarily used in the United States and Canada, though a small number were constructed in Europe for Trans Europ Express service.

<i>Pioneer Zephyr</i> American train

The Pioneer Zephyr is a diesel-powered trainset built by the Budd Company in 1934 for the Chicago, Burlington & Quincy Railroad (CB&Q), commonly known as the Burlington Route. The trainset was the second internal combustion-powered streamliner built for mainline service in the United States, the first such train powered by a diesel engine, and the first to enter revenue service.

<i>Nebraska Zephyr</i>

The Nebraska Zephyr was a streamlined passenger train operated by the Chicago, Burlington and Quincy Railroad between Chicago, Illinois; Omaha, Nebraska; and Lincoln, Nebraska, from 1947 to 1971. Until 1968, the service was provided by two Twin Cities Zephyr articulated trainsets — the "Train of the Gods" and "Train of the Goddesses" — that became synonymous with it. The Nebraska Zephyr was one of many trains discontinued when Amtrak began operations in 1971. The "Train of the Goddesses" set is preserved at the Illinois Railway Museum in Union, Illinois.

<span class="mw-page-title-main">BNSF Line</span> Commuter rail service in the Chicago area

The BNSF Line is a Metra commuter rail line operated by the BNSF Railway in Chicago and its western suburbs, running from Chicago Union Station to Aurora, Illinois through the Chicago Subdivision. In 2010, the BNSF Line continued to have the highest weekday ridership of the 11 Metra lines. While Metra does not refer to its lines by particular colors, the BNSF line's color on Metra timetables is "Cascade Green," in honor of the Burlington Northern Railroad.

The Ak-Sar-Ben Zephyr was a streamlined passenger train operated by the Chicago, Burlington and Quincy Railroad (CB&Q) between Lincoln, Nebraska and Chicago, Illinois, United States. The first version operated from 1940 to 1947; a revived service operated from 1953 to 1970. The "Ak-Sar-Ben" portion of name was created by spelling Nebraska (Neb-ras-ka) backwards and taken from a fraternal organization of the same name. "Zephyr" was a name applied by the CB&Q to many of its trains, beginning with the Pioneer Zephyr in 1934. The name derived from "Zephyrus", the Greek god of the west wind.

<i>Twin Zephyr</i> American trainset

The Twin Zephyrs, also known as the Twin Cities Zephyrs, were a pair of streamlined passenger trains on the Chicago, Burlington and Quincy Railroad (CB&Q), running between Chicago and the Twin Cities of Minneapolis and Saint Paul in Minnesota. It was the second Zephyr service introduced by CB&Q after the record-setting Denver–Chicago "dawn to dusk dash" of the Pioneer Zephyr trainset.

Chicago, Burlington and Quincy Depot or Chicago, Burlington, and Quincy Station is the name of several railway stations or depots, including:

<span class="mw-page-title-main">Galesburg station (Amtrak)</span> Amtrak intercity train station in Galesburg, Illinois

Galesburg is an Amtrak intercity train station in Galesburg, Illinois, United States. The station was originally built in 1984, after the razing of the large depot just south of the current site. It is located north of the large BNSF Classification yard. Just south the Illinois Zephyr and Carl Sandburg diverge via the Quincy main line which bypasses the yard on the east side. The California Zephyr and the Southwest Chief continue to the southwest side of Galesburg near Knox College.

<i>Texas Zephyr</i>

The Texas Zephyr was a named passenger train operated by the Colorado & Southern Railway and the Fort Worth & Denver Railway. The train was originally designated number 1 southbound, and number 2 northbound.

The Exposition Flyer was a passenger train jointly operated by the Chicago, Burlington & Quincy (CB&Q), Denver & Rio Grande Western (D&RGW), and Western Pacific (WP) railroads between Chicago and Oakland, California, for a decade between 1939 and 1949, before being replaced by the famed California Zephyr.

<i>California Zephyr</i> Amtrak service between Chicago and the San Francisco Bay Area

The California Zephyr is a long-distance passenger train operated by Amtrak between Chicago and the San Francisco Bay Area, via Omaha, Denver, Salt Lake City, and Reno. At 2,438 miles (3,924 km), it is Amtrak's longest daily route, and second-longest overall after the Texas Eagle's triweekly continuation from San Antonio to Los Angeles, with travel time between the termini taking approximately 5112 hours. Amtrak claims the route as one of its most scenic, with views of the upper Colorado River valley in the Rocky Mountains, and the Sierra Nevada. The modern train is the second iteration of a train named California Zephyr; the original train was privately operated and ran on a different route through Nevada and California.

<span class="mw-page-title-main">Grand Canyon Railway 4960</span> Preserved American CB&Q O-1a class 2-8-2 locomotive

Grand Canyon Railway 4960 is a preserved O-1A class 2-8-2 "Mikado" type steam locomotive built in August 1923 by the Baldwin Locomotive Works for the Chicago, Burlington and Quincy Railroad (CB&Q). It was used by the CB&Q to pull freight trains, until 1958, when the locomotive pulled its first excursion fantrip, as part of the railroad's steam excursion program.

<span class="mw-page-title-main">Chicago, Burlington and Quincy O-5 class</span> American locomotive class

The Chicago Burlington and Quincy O-5 was a class of 36 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works in 1930 and the Chicago, Burlington and Quincy Railroad (CB&Q) between 1936 and 1940 and operated by the CB&Q until the late 1950s.

<span class="mw-page-title-main">Chicago, Burlington and Quincy 4000</span> Preserved American CB&Q S-4a class 4-6-4 locomotive

Chicago, Burlington and Quincy No. 4000, also known as Aeolus, is a preserved S-4a class 4-6-4 "Hudson" steam locomotive that was originally built by Baldwin in 1930 as S-4 locomotive No. 3002. It was primarily used to pull fast passenger trains before it was rebuilt by the Chicago, Burlington and Quincy Railroad in 1937 to be re-classified as an S-4a with Streamlining, and it was renumbered 4000 in the process. The streamlining was removed during World War II, and the locomotive was later downgraded to secondary passenger and mail service. In 1956, No. 4000 pulled two excursion trains out of Chicago, Illinois before it was retired. The locomotive was donated to the city of La Crosse, Wisconsin in 1963, and it remains on static display in Copeland Park, as of 2024.

<span class="mw-page-title-main">Chicago, Burlington and Quincy 5632</span> Scrapped CB&Q O-5b class 4-8-4 locomotive

Chicago, Burlington and Quincy 5632 was an O-5B class 4-8-4 “Northern” built in the CB&Q's shops in August 1940. It was used to pull mainline passenger and freight trains before it eventually became famous for pulling a plethora of excursion trains for the CB&Q's steam excursion program. By the time the program ended in 1966, No. 5632 was disassembled for an unfinished overhaul, and was subsequently sold to Chicago area railfan Richard Jensen.

<span class="mw-page-title-main">Chicago, Burlington and Quincy 4963</span> Preserved American CB&Q O-1a class 2-8-2 locomotive

Chicago, Burlington and Quincy 4963 is a preserved class "O-1a" 2-8-2 "Mikado" type steam locomotive originally built by the Baldwin Locomotive Works in 1923 for the Chicago, Burlington and Quincy Railroad. It was used by the CB&Q to haul mainline freight trains before it was leased to the Bevier and Southern Railroad to haul short-distance freight trains in the early 1960s. It was subsequently retained by the CB&Q and used as a source of spare parts before being acquired by Richard Jensen.

<span class="mw-page-title-main">Chicago, Burlington and Quincy 710</span> Preserved American 4-6-0 locomotive

Chicago Burlington & Quincy 710 is a preserved 4-6-0 "Ten Wheeler" type steam locomotive on display at the former Lincoln station in Lincoln, Nebraska. Built in 1901, No. 710 was built for high speed passenger service. After a rebuild in 1928, the locomotive provided branch line passenger and freight service until its retirement in 1954.

References

Further reading