Kiln Lane electric railway station

Last updated

Kiln Lane
General information
Location Stallingborough, North East Lincolnshire
England
Coordinates 53°36′36″N0°10′04″W / 53.6100°N 0.1677°W / 53.6100; -0.1677 Coordinates: 53°36′36″N0°10′04″W / 53.6100°N 0.1677°W / 53.6100; -0.1677
Grid reference TA213141
Platforms0
Other information
StatusDisused
History
Original company Great Central Railway
Pre-groupingGreat Central Railway
Post-grouping London and North Eastern Railway
Key dates
15 May 1912opened as No. 8 Passing Place
before 1922renamed Kiln Lane
3 July 1961closed [1]

Kiln Lane electric railway station was situated at the eighth of eight passing loops on the otherwise single track central "country" section [2] of the inter-urban [3] Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock. [4]

Contents

Overview

The electric railway was built primarily to carry workers between Grimsby and Immingham Dock which the Great Central Railway had built on a greenfield site in a sparsely populated area. The line was built by the Great Central and remained in railway ownership up to closure in 1961. It therefore appeared in railway timetables [5] and it was possible to buy through tickets between any of the stops on the line and anywhere on the national railway network, [6] though there never was any physical connection with any conventional track, nor with the tramways in Grimsby and Cleethorpes.

In modern parlance the vehicles would be described as trams, but they were usually referred to locally as "tramcars", with related things being called names such as "tramcar halt" and "tramcar bridge" with "car" a more common short form than "tram."

Location and facilities

The middle section of the line passed through thinly populated marshy farmland. [7] The line was single track with passing places ("loops" in railway parlance) every half mile. The points at the ends of the loops were spring loaded as the line was unsignalled, motormen drove by line of sight. All eight passing loops served as halts, with passengers alighting onto cinders beside the tracks. For the benefit of the few who took advantage of these facilities in the early years each passing loop carried its number on a metal plate. Initially the halts were known as No. 1 Passing Place, No. 2 Passing Place etc. Some were named informally at first, but these names stuck and had become official by 1915. [8] Kiln Lane was such a halt, taking its name from the rural lane which crossed the tracks at this point. Official timetables refer to the halt as follows:

No platforms ever existed at any of the stopping places; passengers were expected to board and alight from the roadway or trackside cinders according to the location. The "stations" were much more commonly referred to as "halts" or "stopping places."

Passengers bought their tickets from conductors on board the cars.

The lines from the station

Tramcars arrived from both directions along conventional rails on a reserved way running parallel to the conventional Grimsby District Light Railway, though there was no physical connection between the two. Grooved tram tracks were used on the street section in Grimsby and around Immingham Town.

Services

Unusually among British tramways services ran round the clock, particularly to provide for railway workers based at Immingham engine shed, whose duties often involved starting or finishing at unsocial hours. Traffic was highly peaked, with convoys of tramcars leaving and arriving to match shift changes at the dock. It was normal for several tramcars to queue to enter and leave the loop at Kiln Lane at the peaks.

After 1945 industry was attracted to the south bank of the Humber, steadily transforming the landscape from rural to urban, though few workers at the new plants lived locally. This led to an increase in ridership and a significant increase in footfall at Kiln Lane halt. It also brought a step change in road use along the lane itself. This led to measures not previously needed, such as signalling, crossing barriers and a concrete waiting shelter. [9]

The east coast floods of 1953 did considerable damage to the tramway's infrastructure, with passengers having to walk between tramcars marooned either side of flooded or washed out sections. [10]

In 1956 over a million passengers used the line [11] and even with deliberate rundown a quarter of a million used it in its last twelve months up to closure in July 1961. [12]

Closure

The line took some years to die. It was cut back at the Grimsby end in 1956. In 1959 it was reduced to peak services only, it disappeared from Bradshaw and through ticketing beyond the line was withdrawn. [13] Formal closure of the line and Kiln Lane tramcar halt came on Monday 3 July 1961, with the last tramcars running on Saturday 1 July 1961, when a convoy of six tramcars set off from Immingham Dock, nominally at 14:03. [14] The last tramcar of this convoy and therefore the last from Kiln Lane was Number 4. [15]

Aftermath

The first track on the line to be removed was at Immingham Dock tramcar station, to give increased parking space. The process of demolition was piecemeal and even in 2013 many hints of the line remained, such as spun concrete masts near Immingham Town.

Former Services
Preceding station Disused railways Following station
Immingham Town
Line and station closed		  Great Central Railway
Grimsby and Immingham Electric Railway 		  Marsh Road LC
Line and station closed

Related Research Articles

The Grimsby District Light Railway (GDLR) was one of three standard gauge railways, all part of the Great Central Railway, promoted by the latter to connect the wider world to Immingham Dock which it built in the early Twentieth Century on an almost uninhabited, greenfield site on the south bank of the Humber, England.

<span class="mw-page-title-main">Grimsby and Immingham Electric Railway</span> Light railway in Lincolnshire, England

The Grimsby & Immingham Electric Railway (G&IER) was an electric light railway, primarily for passenger traffic, linking Great Grimsby with the Port of Immingham in Lincolnshire, England. The line was built by the Great Central Railway (GCR), was absorbed by the London & North Eastern Railway (LNER) in 1923, and became part of the Eastern Region of British Railways. It ran mainly on reserved track.

<span class="mw-page-title-main">Immingham Town electric railway station</span> Former railway station in England

Immingham Town electric railway station was the penultimate unconditional stop on the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock. All tramcars reversed here.

<span class="mw-page-title-main">Immingham Dock electric railway station</span> Former railway station in Lincolnshire, England

Immingham Dock electric railway station was the western terminus of the inter-urban Grimsby and Immingham Electric Railway which ran from Corporation Bridge, Grimsby with a reversal at what was euphemistically called Immingham Town.

Grimsby electric railway station was the eastern terminus of the Grimsby and Immingham Electric Railway, the western terminus being Immingham Dock, 7 miles (11 km) to the north west.

Immingham electric railway station would have been a halt on the Grimsby and Immingham Electric Railway, but it never opened to fare paying passengers. Electrified track was laid to the station site and quarterly proving cars ran for nearly twentyfive years, but no revenue-earning car ever travelled to or from the halt.

Marsh Road Level Crossing electric railway station was situated at the seventh of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

No. 6 Passing Place electric railway station was situated at the sixth of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

No. 5 Passing Place electric railway station was situated at the fifth of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

No. 4 Passing Place electric railway station was situated at the fourth of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Great Coates Level Crossing electric railway station was situated at the third of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Pyewipe Depot electric railway station was situated at the second of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Cleveland Bridge electric railway station was situated at the first of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Cleveland Street electric railway station was the fifth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Stortford Street electric railway station was the fourth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Boulevard Recreation Ground electric railway station was the third of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Jackson Street electric railway station was the second of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Yarborough Street electric railway station was the first of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.

Immingham Halt railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England. It was originally named "Immingham Road", but was renamed Immingham Halt when it was upgraded from an unadvertised halt for contractors' workmen to a publicly advertised station in 1910, though it appeared in Bradshaw as plain "Immingham".

Eastern Entrance to Immingham Dock electric railway station was a temporary halt 62 chains (1.2 km) by route south east of the western terminus of the inter-urban Grimsby and Immingham Electric Railway which ran from Corporation Bridge, Grimsby with a reversal at what was euphemistically called Immingham Town.

References

  1. ↑ Butt 1995, pp. 133 & 175.
  2. ↑ Bates & Bairstow 2005, p. 81.
  3. ↑ Feather 1993, p. 1.
  4. ↑ King & Hewins 1989, Photos 54 & 111.
  5. ↑ Bradshaw 1985, p. 717.
  6. ↑ Price 1991, p. 112.
  7. ↑ Mummery & Butler 1999, p. 65.
  8. ↑ Pask 1999, p. 2.
  9. ↑ Price 1991, pp. 85 & 100.
  10. ↑ King & Hewins 1989, Photo 55.
  11. ↑ Price 1991, p. 94.
  12. ↑ Skelsey 2011, p. 237.
  13. ↑ Bates & Bairstow 2005, p. 85.
  14. ↑ Skelsey 2011, p. 239.
  15. ↑ Price 1991, p. 102.

Sources

Further material

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.