Riby Street Platform | |
---|---|
General information | |
Location | Grimsby, Lincolnshire England |
Coordinates | 53°34′34″N0°04′22″W / 53.5762°N 0.0729°W |
Grid reference | TA277106 |
Platforms | 2 |
Other information | |
Status | Disused |
History | |
Original company | Great Central Railway |
Pre-grouping | Great Central Railway |
Post-grouping | LNER |
Key dates | |
by October 1904 | opened for unadvertised workmen service |
4 June 1917 [1] | public advertised service |
April 1919 | reverted to unadvertised workmen service |
14 April 1941 [2] | closed |
Riby Street Platform was a railway station which served the Riby Street area of Grimsby from 1904 to 1941. It was opened by the Great Central Railway to serve the first dock in Grimsby but was closed during World War II and never reopened. A source with local knowledge refers to the station as "Riby Street Platforms". [3]
The station was known as "Skateknob Junction" by workers at the nearby fish docks. [4] [5] It consisted of two narrow wooden platforms connected by a footbridge. [6] Although the platforms had been removed, the footbridge was still plain to see in 1961. [7]
The station was opened in 1904 aiming at services for workers at the adjacent docks, most of which were unadvertised. Public advertised service only 1917-1919 and accordingly it is not shown in the July 1922 Bradshaw. [8]
By 2015 no trace of the station could be found. The line through the station site had been reduced to single track, but a regular passenger service to Cleethorpes. No railborne fish traffic had been carried from Grimsby for many years.
Preceding station | Historical railways | Following station | ||
---|---|---|---|---|
Line and station open | Great Central Railway | Line and station open |
East Halton railway station was located on Skitter Road north of East Halton, Lincolnshire, England.
Killingholme railway station was located on Killingholme Marsh in the parish of South Killingholme, Lincolnshire, England, equidistant from the villages of North and South Killingholme.
Immingham Dock railway station served the dock at Immingham, Lincolnshire, England.
Grimsby electric railway station was the eastern terminus of the Grimsby and Immingham Electric Railway, the western terminus being Immingham Dock, 7 miles (11 km) to the north west.
New Holland Pier railway station is a former railway terminus in North Lincolnshire, England. It stood at the seaward end of the New Holland Pier, which juts 1,375 feet (419 m) northwards into the Humber estuary at the village of New Holland. Its purpose was to enable railway passengers, vehicles and goods to transfer to and from ferries plying between New Holland and Hull.
Killingholme Admiralty Platform railway station, known locally as Admiralty Platform, was near North Killingholme Haven, Lincolnshire, England.
Grimsby Pier railway station was sited on the north Royal Dock pier in Grimsby, Lincolnshire, England, between the Tidal Basin arm and the Accumulator Tower.
Immingham Western Jetty railway station was the first railway station which served the dock in Immingham, Lincolnshire, England. It was replaced by Immingham Dock.
New Holland Town railway station is a former railway station in the village of New Holland in North Lincolnshire, England. It stood at the landward end of the pier, whilst the purpose of Pier station, which juts 1,375 feet (419 m) northwards into the Humber estuary, was to enable railway passengers and goods to transfer to and from ferries plying between New Holland and Hull. New Holland Town station's purpose was for more conventional use by the local community.
Grimsby engine shed was a railway locomotive maintenance depot located southeast of Grimsby Docks station in North East Lincolnshire.
Kiln Lane electric railway station was situated at the eighth of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Cleveland Bridge electric railway station was situated at the first of eight passing loops on the otherwise single track central "country" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Cleveland Street electric railway station was the fifth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Stortford Street electric railway station was the fourth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Boulevard Recreation Ground electric railway station was the third of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Jackson Street electric railway station was the second of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Yarborough Street electric railway station was the first of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Ulceby Aerodrome Platform railway station was situated 74 chains (1.5 km) northeast of Ulceby North Junction between Ulceby and the village of South Killingholme, Lincolnshire, England. It was opened by LNER to serve the Second World War airfield RAF North Killingholme, whose southern perimeter lay a short distance to the north.
Immingham Halt railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England. It was originally named "Immingham Road", but was renamed Immingham Halt when it was upgraded from an unadvertised halt for contractors' workmen to a publicly advertised station in 1910, though it appeared in Bradshaw as plain "Immingham".
Grimsby Pyewipe Road railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England.