Killingholme | |
---|---|
General information | |
Location | North and South Killingholme, North East Lincolnshire England |
Coordinates | 53°38′54″N0°13′32″W / 53.6482°N 0.2255°W Coordinates: 53°38′54″N0°13′32″W / 53.6482°N 0.2255°W |
Grid reference | TA173183 |
Platforms | 1 [1] [2] |
Other information | |
Status | Disused |
History | |
Original company | Barton and Immingham Light Railway |
Pre-grouping | Great Central Railway |
Post-grouping | London and North Eastern Railway |
Key dates | |
1 May 1911 [3] | Station opened |
July 1956 | Station became an unstaffed halt [4] |
17 June 1963 | Station closed to passengers |
4 January 1965 | Station closed completely [5] [6] |
Killingholme railway station was located on Killingholme Marsh in the parish of South Killingholme, Lincolnshire, England, equidistant from the villages of North and South Killingholme. [7] [8]
The station was built by the Barton and Immingham Light Railway under the auspices of the Great Central Railway. [9] The line's primary purpose was to enable workers to get to and from Immingham Dock which was being built at the time the line was opened. The typical journey time to the dock was six minutes. [10]
The station had a single straight wooden platform bearing a small wooden station building with minimal facilities. [11] Early maps show that the station was situated on a passing loop, but no second platform was ever built.
When the line and station were built the area was rural and very thinly populated. By 2015 the area had become industrial but remained thinly populated. A single track still ran through the site, now carrying modern produce.
On 7 October 1967 a RCTS railtour passed through the station. [12] [13]
Preceding station | Disused railways | Following station | ||
---|---|---|---|---|
Killingholme Admiralty Platform Line and station closed | Great Central Railway Barton and Immingham Light Railway | Immingham Western Jetty Line and station closed 1911-about 1922 | ||
Immingham Dock Line and station closed About 1922-1963 |
Immingham engine shed, also known as Immingham depot, or more recently as Immingham TMD and always locally as Loco is a railway maintenance depot located on the Immingham Dock estate, in North East Lincolnshire, England. The depot code is IM.
East Halton railway station was located on Skitter Road north of East Halton, Lincolnshire, England.
Immingham Dock railway station served the dock at Immingham, Lincolnshire, England.
Immingham Town electric railway station was the penultimate unconditional stop on the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock. All tramcars reversed here.
Immingham Dock electric railway station was the western terminus of the inter-urban Grimsby and Immingham Electric Railway which ran from Corporation Bridge, Grimsby with a reversal at what was euphemistically called Immingham Town.
Grimsby electric railway station was the eastern terminus of the Grimsby and Immingham Electric Railway, the western terminus being Immingham Dock, 7 miles (11 km) to the north west.
New Holland Pier railway station is a former railway terminus in North Lincolnshire, England. It stood at the seaward end of the New Holland Pier, which juts 1,375 feet (419 m) northwards into the River Humber at the village of New Holland. Its purpose was to enable railway passengers, vehicles and goods to transfer to and from ferries plying between New Holland and Hull.
Killingholme Admiralty Platform railway station, known locally as Admiralty Platform, was near North Killingholme Haven, Lincolnshire, England.
The Barton and Immingham Light Railway is a railway line in North Lincolnshire and North East Lincolnshire, Lincolnshire, England. It ran from a junction at Goxhill to Immingham Dock. Another spur runs from Immingham Dock to Ulceby. It was later absorbed by the Great Central Railway and later, on grouping, it passed to the London and North Eastern Railway. The railway is used for freight traffic to the ports at Immingham. The section from Goxhill to North Killingholme was mothballed and lifted. The track is still in situ but now overgrown and out of use.
Immingham Western Jetty railway station was the first railway station which served the dock in Immingham, Lincolnshire, England. It was replaced by Immingham Dock.
New Holland Town railway station is a former railway station in the village of New Holland in North Lincolnshire, England. It stood at the landward end of the pier, whilst the purpose of Pier station, which juts 1,375 feet (419 m) northwards into the River Humber, was to enable railway passengers and goods to transfer to and from ferries plying between New Holland and Hull. New Holland Town station's purpose was for more conventional use by the local community.
New Holland engine shed was a small railway locomotive maintenance depot located southwest of the triangle of lines south of New Holland Town station in North East Lincolnshire, England.
Grimsby engine shed was a railway locomotive maintenance depot located southeast of Grimsby Docks station in North East Lincolnshire.
Cleveland Street electric railway station was the fifth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Stortford Street electric railway station was the fourth of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Boulevard Recreation Ground electric railway station was the third of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Jackson Street electric railway station was the second of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Yarborough Street electric railway station was the first of five calling points on the 1+1⁄4 miles (2.0 km) eastern, "street" section of the inter-urban Grimsby and Immingham Electric Railway when travelling from Corporation Bridge, Grimsby to Immingham Dock.
Immingham Halt railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England. It was originally named "Immingham Road", but was renamed Immingham Halt when it was upgraded from an unadvertised halt for contractors' workmen to a publicly advertised station in 1910, though it appeared in Bradshaw as plain "Immingham".
Grimsby Pyewipe Road railway station was a temporary terminus serving people involved in building Immingham Dock, Lincolnshire, England.