Protein design

Last updated

Protein design is the rational design of new protein molecules to design novel activity, behavior, or purpose, and to advance basic understanding of protein function. [1] Proteins can be designed from scratch (de novo design) or by making calculated variants of a known protein structure and its sequence (termed protein redesign). Rational protein design approaches make protein-sequence predictions that will fold to specific structures. These predicted sequences can then be validated experimentally through methods such as peptide synthesis, site-directed mutagenesis, or artificial gene synthesis.

Contents

Rational protein design dates back to the mid-1970s. [2] Recently, however, there were numerous examples of successful rational design of water-soluble and even transmembrane peptides and proteins, in part due to a better understanding of different factors contributing to protein structure stability and development of better computational methods.

Overview and history

The goal in rational protein design is to predict amino acid sequences that will fold to a specific protein structure. Although the number of possible protein sequences is vast, growing exponentially with the size of the protein chain, only a subset of them will fold reliably and quickly to one native state. Protein design involves identifying novel sequences within this subset. The native state of a protein is the conformational free energy minimum for the chain. Thus, protein design is the search for sequences that have the chosen structure as a free energy minimum. In a sense, it is the reverse of protein structure prediction. In design, a tertiary structure is specified, and a sequence that will fold to it is identified. Hence, it is also termed inverse folding. Protein design is then an optimization problem: using some scoring criteria, an optimized sequence that will fold to the desired structure is chosen.

When the first proteins were rationally designed during the 1970s and 1980s, the sequence for these was optimized manually based on analyses of other known proteins, the sequence composition, amino acid charges, and the geometry of the desired structure. [2] The first designed proteins are attributed to Bernd Gutte, who designed a reduced version of a known catalyst, bovine ribonuclease, and tertiary structures consisting of beta-sheets and alpha-helices, including a binder of DDT. Urry and colleagues later designed elastin-like fibrous peptides based on rules on sequence composition. Richardson and coworkers designed a 79-residue protein with no sequence homology to a known protein. [2] In the 1990s, the advent of powerful computers, libraries of amino acid conformations, and force fields developed mainly for molecular dynamics simulations enabled the development of structure-based computational protein design tools. Following the development of these computational tools, great success has been achieved over the last 30 years in protein design. The first protein successfully designed completely de novo was done by Stephen Mayo and coworkers in 1997, [3] and, shortly after, in 1999 Peter S. Kim and coworkers designed dimers, trimers, and tetramers of unnatural right-handed coiled coils. [4] [5] In 2003, David Baker's laboratory designed a full protein to a fold never seen before in nature. [6] Later, in 2008, Baker's group computationally designed enzymes for two different reactions. [7] In 2010, one of the most powerful broadly neutralizing antibodies was isolated from patient serum using a computationally designed protein probe. [8] Due to these and other successes (e.g., see examples below), protein design has become one of the most important tools available for protein engineering. There is great hope that the design of new proteins, small and large, will have uses in biomedicine and bioengineering.

Underlying models of protein structure and function

Protein design programs use computer models of the molecular forces that drive proteins in in vivo environments. In order to make the problem tractable, these forces are simplified by protein design models. Although protein design programs vary greatly, they have to address four main modeling questions: What is the target structure of the design, what flexibility is allowed on the target structure, which sequences are included in the search, and which force field will be used to score sequences and structures.

Target structure

The Top7 protein was one of the first proteins designed for a fold that had never been seen before in nature Top7.png
The Top7 protein was one of the first proteins designed for a fold that had never been seen before in nature

Protein function is heavily dependent on protein structure, and rational protein design uses this relationship to design function by designing proteins that have a target structure or fold. Thus, by definition, in rational protein design the target structure or ensemble of structures must be known beforehand. This contrasts with other forms of protein engineering, such as directed evolution, where a variety of methods are used to find proteins that achieve a specific function, and with protein structure prediction where the sequence is known, but the structure is unknown.

Most often, the target structure is based on a known structure of another protein. However, novel folds not seen in nature have been made increasingly possible. Peter S. Kim and coworkers designed trimers and tetramers of unnatural coiled coils, which had not been seen before in nature. [4] [5] The protein Top7, developed in David Baker's lab, was designed completely using protein design algorithms, to a completely novel fold. [6] More recently, Baker and coworkers developed a series of principles to design ideal globular-protein structures based on protein folding funnels that bridge between secondary structure prediction and tertiary structures. These principles, which build on both protein structure prediction and protein design, were used to design five different novel protein topologies. [9]

Sequence space

FSD-1 (shown in blue, PDB id: 1FSV) was the first de novo computational design of a full protein. The target fold was that of the zinc finger in residues 33-60 of the structure of protein Zif268 (shown in red, PDB id: 1ZAA). The designed sequence had very little sequence identity with any known protein sequence. 1FSVblue-1ZAAred.png
FSD-1 (shown in blue, PDB id: 1FSV) was the first de novo computational design of a full protein. The target fold was that of the zinc finger in residues 33–60 of the structure of protein Zif268 (shown in red, PDB id: 1ZAA). The designed sequence had very little sequence identity with any known protein sequence.

In rational protein design, proteins can be redesigned from the sequence and structure of a known protein, or completely from scratch in de novo protein design. In protein redesign, most of the residues in the sequence are maintained as their wild-type amino-acid while a few are allowed to mutate. In de novo design, the entire sequence is designed anew, based on no prior sequence.

Both de novo designs and protein redesigns can establish rules on the sequence space: the specific amino acids that are allowed at each mutable residue position. For example, the composition of the surface of the RSC3 probe to select HIV-broadly neutralizing antibodies was restricted based on evolutionary data and charge balancing. Many of the earliest attempts on protein design were heavily based on empiric rules on the sequence space. [2] Moreover, the design of fibrous proteins usually follows strict rules on the sequence space. Collagen-based designed proteins, for example, are often composed of Gly-Pro-X repeating patterns. [2] The advent of computational techniques allows designing proteins with no human intervention in sequence selection. [3]

Structural flexibility

Common protein design programs use rotamer libraries to simplify the conformational space of protein side chains. This animation loops through all the rotamers of the isoleucine amino acid based on the Penultimate Rotamer Library (total of 7 rotamers). IleRotamers.gif
Common protein design programs use rotamer libraries to simplify the conformational space of protein side chains. This animation loops through all the rotamers of the isoleucine amino acid based on the Penultimate Rotamer Library (total of 7 rotamers).

In protein design, the target structure (or structures) of the protein are known. However, a rational protein design approach must model some flexibility on the target structure in order to increase the number of sequences that can be designed for that structure and to minimize the chance of a sequence folding to a different structure. For example, in a protein redesign of one small amino acid (such as alanine) in the tightly packed core of a protein, very few mutants would be predicted by a rational design approach to fold to the target structure, if the surrounding side-chains are not allowed to be repacked.

Thus, an essential parameter of any design process is the amount of flexibility allowed for both the side-chains and the backbone. In the simplest models, the protein backbone is kept rigid while some of the protein side-chains are allowed to change conformations. However, side-chains can have many degrees of freedom in their bond lengths, bond angles, and χ dihedral angles. To simplify this space, protein design methods use rotamer libraries that assume ideal values for bond lengths and bond angles, while restricting χ dihedral angles to a few frequently observed low-energy conformations termed rotamers.

Rotamer libraries are derived from the statistical analysis of many protein structures. Backbone-independent rotamer libraries describe all rotamers. [10] Backbone-dependent rotamer libraries, in contrast, describe the rotamers as how likely they are to appear depending on the protein backbone arrangement around the side chain. [11] Most protein design programs use one conformation (e.g., the modal value for rotamer dihedrals in space) or several points in the region described by the rotamer; the OSPREY protein design program, in contrast, models the entire continuous region. [12]

Although rational protein design must preserve the general backbone fold a protein, allowing some backbone flexibility can significantly increase the number of sequences that fold to the structure while maintaining the general fold of the protein. [13] Backbone flexibility is especially important in protein redesign because sequence mutations often result in small changes to the backbone structure. Moreover, backbone flexibility can be essential for more advanced applications of protein design, such as binding prediction and enzyme design. Some models of protein design backbone flexibility include small and continuous global backbone movements, discrete backbone samples around the target fold, backrub motions, and protein loop flexibility. [13] [14]

Energy function

Comparison of various potential energy functions. The most accurate energy are those that use quantum mechanical calculations, but these are too slow for protein design. On the other extreme, heuristic energy functions are based on statistical terms and are very fast. In the middle are molecular mechanics energy functions that are physically-based but are not as computationally expensive as quantum mechanical simulations. PEF comparison.png
Comparison of various potential energy functions. The most accurate energy are those that use quantum mechanical calculations, but these are too slow for protein design. On the other extreme, heuristic energy functions are based on statistical terms and are very fast. In the middle are molecular mechanics energy functions that are physically-based but are not as computationally expensive as quantum mechanical simulations.

Rational protein design techniques must be able to discriminate sequences that will be stable under the target fold from those that would prefer other low-energy competing states. Thus, protein design requires accurate energy functions that can rank and score sequences by how well they fold to the target structure. At the same time, however, these energy functions must consider the computational challenges behind protein design. One of the most challenging requirements for successful design is an energy function that is both accurate and simple for computational calculations.

The most accurate energy functions are those based on quantum mechanical simulations. However, such simulations are too slow and typically impractical for protein design. Instead, many protein design algorithms use either physics-based energy functions adapted from molecular mechanics simulation programs, knowledge based energy-functions, or a hybrid mix of both. The trend has been toward using more physics-based potential energy functions. [15]

Physics-based energy functions, such as AMBER and CHARMM, are typically derived from quantum mechanical simulations, and experimental data from thermodynamics, crystallography, and spectroscopy. [16] These energy functions typically simplify physical energy function and make them pairwise decomposable, meaning that the total energy of a protein conformation can be calculated by adding the pairwise energy between each atom pair, which makes them attractive for optimization algorithms. Physics-based energy functions typically model an attractive-repulsive Lennard-Jones term between atoms and a pairwise electrostatics coulombic term [17] between non-bonded atoms.

Water-mediated hydrogen bonds play a key role in protein-protein binding. One such interaction is shown between residues D457, S365 in the heavy chain of the HIV-broadly-neutralizing antibody VRC01 (green) and residues N58 and Y59 in the HIV envelope protein GP120 (purple). Water-hbond-vrc01-gp120.png
Water-mediated hydrogen bonds play a key role in protein–protein binding. One such interaction is shown between residues D457, S365 in the heavy chain of the HIV-broadly-neutralizing antibody VRC01 (green) and residues N58 and Y59 in the HIV envelope protein GP120 (purple).

Statistical potentials, in contrast to physics-based potentials, have the advantage of being fast to compute, of accounting implicitly of complex effects and being less sensitive to small changes in the protein structure. [19] These energy functions are based on deriving energy values from frequency of appearance on a structural database.

Protein design, however, has requirements that can sometimes be limited in molecular mechanics force-fields. Molecular mechanics force-fields, which have been used mostly in molecular dynamics simulations, are optimized for the simulation of single sequences, but protein design searches through many conformations of many sequences. Thus, molecular mechanics force-fields must be tailored for protein design. In practice, protein design energy functions often incorporate both statistical terms and physics-based terms. For example, the Rosetta energy function, one of the most-used energy functions, incorporates physics-based energy terms originating in the CHARMM energy function, and statistical energy terms, such as rotamer probability and knowledge-based electrostatics. Typically, energy functions are highly customized between laboratories, and specifically tailored for every design. [16]

Challenges for effective design energy functions

Water makes up most of the molecules surrounding proteins and is the main driver of protein structure. Thus, modeling the interaction between water and protein is vital in protein design. The number of water molecules that interact with a protein at any given time is huge and each one has a large number of degrees of freedom and interaction partners. Instead, protein design programs model most of such water molecules as a continuum, modeling both the hydrophobic effect and solvation polarization. [16]

Individual water molecules can sometimes have a crucial structural role in the core of proteins, and in protein–protein or protein–ligand interactions. Failing to model such waters can result in mispredictions of the optimal sequence of a protein–protein interface. As an alternative, water molecules can be added to rotamers. [16]


As an optimization problem

This animation illustrates the complexity of a protein design search, which typically compares all the rotamer-conformations from all possible mutations at all residues. In this example, the residues Phe36 and His 106 are allowed to mutate to, respectively, the amino acids Tyr and Asn. Phe and Tyr have 4 rotamers each in the rotamer library, while Asn and His have 7 and 8 rotamers, respectively, in the rotamer library (from the Richardson's penultimate rotamer library ). The animation loops through all (4 + 4) x (7 + 8) = 120 possibilities. The structure shown is that of myoglobin, PDB id: 1mbn. ProteinDesignSearch.gif
This animation illustrates the complexity of a protein design search, which typically compares all the rotamer-conformations from all possible mutations at all residues. In this example, the residues Phe36 and His 106 are allowed to mutate to, respectively, the amino acids Tyr and Asn. Phe and Tyr have 4 rotamers each in the rotamer library, while Asn and His have 7 and 8 rotamers, respectively, in the rotamer library (from the Richardson's penultimate rotamer library ). The animation loops through all (4 + 4) x (7 + 8) = 120 possibilities. The structure shown is that of myoglobin, PDB id: 1mbn.

The goal of protein design is to find a protein sequence that will fold to a target structure. A protein design algorithm must, thus, search all the conformations of each sequence, with respect to the target fold, and rank sequences according to the lowest-energy conformation of each one, as determined by the protein design energy function. Thus, a typical input to the protein design algorithm is the target fold, the sequence space, the structural flexibility, and the energy function, while the output is one or more sequences that are predicted to fold stably to the target structure.

The number of candidate protein sequences, however, grows exponentially with the number of protein residues; for example, there are 20100 protein sequences of length 100. Furthermore, even if amino acid side-chain conformations are limited to a few rotamers (see Structural flexibility), this results in an exponential number of conformations for each sequence. Thus, in our 100 residue protein, and assuming that each amino acid has exactly 10 rotamers, a search algorithm that searches this space will have to search over 200100 protein conformations.

The most common energy functions can be decomposed into pairwise terms between rotamers and amino acid types, which casts the problem as a combinatorial one, and powerful optimization algorithms can be used to solve it. In those cases, the total energy of each conformation belonging to each sequence can be formulated as a sum of individual and pairwise terms between residue positions. If a designer is interested only in the best sequence, the protein design algorithm only requires the lowest-energy conformation of the lowest-energy sequence. In these cases, the amino acid identity of each rotamer can be ignored and all rotamers belonging to different amino acids can be treated the same. Let ri be a rotamer at residue position i in the protein chain, and E(ri) the potential energy between the internal atoms of the rotamer. Let E(ri, rj) be the potential energy between ri and rotamer rj at residue position j. Then, we define the optimization problem as one of finding the conformation of minimum energy (ET):

 

 

 

 

(1)

The problem of minimizing ET is an NP-hard problem. [14] [20] [21] Even though the class of problems is NP-hard, in practice many instances of protein design can be solved exactly or optimized satisfactorily through heuristic methods.

Algorithms

Several algorithms have been developed specifically for the protein design problem. These algorithms can be divided into two broad classes: exact algorithms, such as dead-end elimination, that lack runtime guarantees but guarantee the quality of the solution; and heuristic algorithms, such as Monte Carlo, that are faster than exact algorithms but have no guarantees on the optimality of the results. Exact algorithms guarantee that the optimization process produced the optimal according to the protein design model. Thus, if the predictions of exact algorithms fail when these are experimentally validated, then the source of error can be attributed to the energy function, the allowed flexibility, the sequence space or the target structure (e.g., if it cannot be designed for). [22]

Some protein design algorithms are listed below. Although these algorithms address only the most basic formulation of the protein design problem, Equation ( 1 ), when the optimization goal changes because designers introduce improvements and extensions to the protein design model, such as improvements to the structural flexibility allowed (e.g., protein backbone flexibility) or including sophisticated energy terms, many of the extensions on protein design that improve modeling are built atop these algorithms. For example, Rosetta Design incorporates sophisticated energy terms, and backbone flexibility using Monte Carlo as the underlying optimizing algorithm. OSPREY's algorithms build on the dead-end elimination algorithm and A* to incorporate continuous backbone and side-chain movements. Thus, these algorithms provide a good perspective on the different kinds of algorithms available for protein design.

In 2020 scientists reported the development of an AI-based process using genome databases for evolution-based designing of novel proteins. They used deep learning to identify design-rules. [23] [24] In 2022, a study reported deep learning software that can design proteins that contain prespecified functional sites. [25] [26]

With mathematical guarantees

Dead-end elimination

The dead-end elimination (DEE) algorithm reduces the search space of the problem iteratively by removing rotamers that can be provably shown to be not part of the global lowest energy conformation (GMEC). On each iteration, the dead-end elimination algorithm compares all possible pairs of rotamers at each residue position, and removes each rotamer ri that can be shown to always be of higher energy than another rotamer ri and is thus not part of the GMEC:

Other powerful extensions to the dead-end elimination algorithm include the pairs elimination criterion, and the generalized dead-end elimination criterion. This algorithm has also been extended to handle continuous rotamers with provable guarantees.

Although the Dead-end elimination algorithm runs in polynomial time on each iteration, it cannot guarantee convergence. If, after a certain number of iterations, the dead-end elimination algorithm does not prune any more rotamers, then either rotamers have to be merged or another search algorithm must be used to search the remaining search space. In such cases, the dead-end elimination acts as a pre-filtering algorithm to reduce the search space, while other algorithms, such as A*, Monte Carlo, Linear Programming, or FASTER are used to search the remaining search space. [14]

Branch and bound

The protein design conformational space can be represented as a tree, where the protein residues are ordered in an arbitrary way, and the tree branches at each of the rotamers in a residue. Branch and bound algorithms use this representation to efficiently explore the conformation tree: At each branching, branch and bound algorithms bound the conformation space and explore only the promising branches. [14] [27] [28]

A popular search algorithm for protein design is the A* search algorithm. [14] [28] A* computes a lower-bound score on each partial tree path that lower bounds (with guarantees) the energy of each of the expanded rotamers. Each partial conformation is added to a priority queue and at each iteration the partial path with the lowest lower bound is popped from the queue and expanded. The algorithm stops once a full conformation has been enumerated and guarantees that the conformation is the optimal.

The A* score f in protein design consists of two parts, f=g+h. g is the exact energy of the rotamers that have already been assigned in the partial conformation. h is a lower bound on the energy of the rotamers that have not yet been assigned. Each is designed as follows, where d is the index of the last assigned residue in the partial conformation.

Integer linear programming

The problem of optimizing ET (Equation ( 1 )) can be easily formulated as an integer linear program (ILP). [29] One of the most powerful formulations uses binary variables to represent the presence of a rotamer and edges in the final solution, and constraints the solution to have exactly one rotamer for each residue and one pairwise interaction for each pair of residues:

s.t.

ILP solvers, such as CPLEX, can compute the exact optimal solution for large instances of protein design problems. These solvers use a linear programming relaxation of the problem, where qi and qij are allowed to take continuous values, in combination with a branch and cut algorithm to search only a small portion of the conformation space for the optimal solution. ILP solvers have been shown to solve many instances of the side-chain placement problem. [29]

Message-passing based approximations to the linear programming dual

ILP solvers depend on linear programming (LP) algorithms, such as the Simplex or barrier-based methods to perform the LP relaxation at each branch. These LP algorithms were developed as general-purpose optimization methods and are not optimized for the protein design problem (Equation ( 1 )). In consequence, the LP relaxation becomes the bottleneck of ILP solvers when the problem size is large. [30] Recently, several alternatives based on message-passing algorithms have been designed specifically for the optimization of the LP relaxation of the protein design problem. These algorithms can approximate both the dual or the primal instances of the integer programming, but in order to maintain guarantees on optimality, they are most useful when used to approximate the dual of the protein design problem, because approximating the dual guarantees that no solutions are missed. Message-passing based approximations include the tree reweighted max-product message passing algorithm, [31] [32] and the message passing linear programming algorithm. [33]

Optimization algorithms without guarantees

Monte Carlo and simulated annealing

Monte Carlo is one of the most widely used algorithms for protein design. In its simplest form, a Monte Carlo algorithm selects a residue at random, and in that residue a randomly chosen rotamer (of any amino acid) is evaluated. [21] The new energy of the protein, Enew is compared against the old energy Eold and the new rotamer is accepted with a probability of:

where β is the Boltzmann constant and the temperature T can be chosen such that in the initial rounds it is high and it is slowly annealed to overcome local minima. [12]

FASTER

The FASTER algorithm uses a combination of deterministic and stochastic criteria to optimize amino acid sequences. FASTER first uses DEE to eliminate rotamers that are not part of the optimal solution. Then, a series of iterative steps optimize the rotamer assignment. [34] [35]

Belief propagation

In belief propagation for protein design, the algorithm exchanges messages that describe the belief that each residue has about the probability of each rotamer in neighboring residues. The algorithm updates messages on every iteration and iterates until convergence or until a fixed number of iterations. Convergence is not guaranteed in protein design. The message mi j(rj that a residue i sends to every rotamer (rj at neighboring residue j is defined as:

Both max-product and sum-product belief propagation have been used to optimize protein design.

Applications and examples of designed proteins

Enzyme design

The design of new enzymes is a use of protein design with huge bioengineering and biomedical applications. In general, designing a protein structure can be different from designing an enzyme, because the design of enzymes must consider many states involved in the catalytic mechanism. However protein design is a prerequisite of de novo enzyme design because, at the very least, the design of catalysts requires a scaffold in which the catalytic mechanism can be inserted. [36]

Great progress in de novo enzyme design, and redesign, was made in the first decade of the 21st century. In three major studies, David Baker and coworkers de novo designed enzymes for the retro-aldol reaction, [37] a Kemp-elimination reaction, [38] and for the Diels-Alder reaction. [39] Furthermore, Stephen Mayo and coworkers developed an iterative method to design the most efficient known enzyme for the Kemp-elimination reaction. [40] Also, in the laboratory of Bruce Donald, computational protein design was used to switch the specificity of one of the protein domains of the nonribosomal peptide synthetase that produces Gramicidin S, from its natural substrate phenylalanine to other noncognate substrates including charged amino acids; the redesigned enzymes had activities close to those of the wild-type. [41]

Design for affinity

Protein–protein interactions are involved in most biotic processes. Many of the hardest-to-treat diseases, such as Alzheimer's, many forms of cancer (e.g., TP53), and human immunodeficiency virus (HIV) infection involve protein–protein interactions. Thus, to treat such diseases, it is desirable to design protein or protein-like therapeutics that bind one of the partners of the interaction and, thus, disrupt the disease-causing interaction. This requires designing protein-therapeutics for affinity toward its partner.

Protein–protein interactions can be designed using protein design algorithms because the principles that rule protein stability also rule protein–protein binding. Protein–protein interaction design, however, presents challenges not commonly present in protein design. One of the most important challenges is that, in general, the interfaces between proteins are more polar than protein cores, and binding involves a tradeoff between desolvation and hydrogen bond formation. [42] To overcome this challenge, Bruce Tidor and coworkers developed a method to improve the affinity of antibodies by focusing on electrostatic contributions. They found that, for the antibodies designed in the study, reducing the desolvation costs of the residues in the interface increased the affinity of the binding pair. [42] [43] [44]

Scoring binding predictions

Protein design energy functions must be adapted to score binding predictions because binding involves a trade-off between the lowest-energy conformations of the free proteins (EP and EL) and the lowest-energy conformation of the bound complex (EPL):

.

The K* algorithm approximates the binding constant of the algorithm by including conformational entropy into the free energy calculation. The K* algorithm considers only the lowest-energy conformations of the free and bound complexes (denoted by the sets P, L, and PL) to approximate the partition functions of each complex: [14]

Design for specificity

The design of protein–protein interactions must be highly specific because proteins can interact with a large number of proteins; successful design requires selective binders. Thus, protein design algorithms must be able to distinguish between on-target (or positive design) and off-target binding (or negative design). [2] [42] One of the most prominent examples of design for specificity is the design of specific bZIP-binding peptides by Amy Keating and coworkers for 19 out of the 20 bZIP families; 8 of these peptides were specific for their intended partner over competing peptides. [42] [45] [46] Further, positive and negative design was also used by Anderson and coworkers to predict mutations in the active site of a drug target that conferred resistance to a new drug; positive design was used to maintain wild-type activity, while negative design was used to disrupt binding of the drug. [47] Recent computational redesign by Costas Maranas and coworkers was also capable of experimentally switching the cofactor specificity of Candida boidinii xylose reductase from NADPH to NADH. [48]

Protein resurfacing

Protein resurfacing consists of designing a protein's surface while preserving the overall fold, core, and boundary regions of the protein intact. Protein resurfacing is especially useful to alter the binding of a protein to other proteins. One of the most important applications of protein resurfacing was the design of the RSC3 probe to select broadly neutralizing HIV antibodies at the NIH Vaccine Research Center. First, residues outside of the binding interface between the gp120 HIV envelope protein and the formerly discovered b12-antibody were selected to be designed. Then, the sequence spaced was selected based on evolutionary information, solubility, similarity with the wild-type, and other considerations. Then the RosettaDesign software was used to find optimal sequences in the selected sequence space. RSC3 was later used to discover the broadly neutralizing antibody VRC01 in the serum of a long-term HIV-infected non-progressor individual. [49]

Design of globular proteins

Globular proteins are proteins that contain a hydrophobic core and a hydrophilic surface. Globular proteins often assume a stable structure, unlike fibrous proteins, which have multiple conformations. The three-dimensional structure of globular proteins is typically easier to determine through X-ray crystallography and nuclear magnetic resonance than both fibrous proteins and membrane proteins, which makes globular proteins more attractive for protein design than the other types of proteins. Most successful protein designs have involved globular proteins. Both RSD-1, and Top7 were de novo designs of globular proteins. Five more protein structures were designed, synthesized, and verified in 2012 by the Baker group. These new proteins serve no biotic function, but the structures are intended to act as building-blocks that can be expanded to incorporate functional active sites. The structures were found computationally by using new heuristics based on analyzing the connecting loops between parts of the sequence that specify secondary structures. [50]

Design of membrane proteins

Several transmembrane proteins have been successfully designed, [51] along with many other membrane-associated peptides and proteins. [52] Recently, Costas Maranas and his coworkers developed an automated tool [53] to redesign the pore size of Outer Membrane Porin Type-F (OmpF) from E.coli to any desired sub-nm size and assembled them in membranes to perform precise angstrom scale separation.

Other applications

One of the most desirable uses for protein design is for biosensors, proteins that will sense the presence of specific compounds. Some attempts in the design of biosensors include sensors for unnatural molecules including TNT. [54] More recently, Kuhlman and coworkers designed a biosensor of the PAK1. [55]

In a sense, protein design is a subset of battery design.[ further explanation needed ]

See also

Related Research Articles

<span class="mw-page-title-main">Protein secondary structure</span> General three-dimensional form of local segments of proteins

Protein secondary structure is the local spatial conformation of the polypeptide backbone excluding the side chains. The two most common secondary structural elements are alpha helices and beta sheets, though beta turns and omega loops occur as well. Secondary structure elements typically spontaneously form as an intermediate before the protein folds into its three dimensional tertiary structure.

<span class="mw-page-title-main">Protein tertiary structure</span> Three dimensional shape of a protein

Protein tertiary structure is the three dimensional shape of a protein. The tertiary structure will have a single polypeptide chain "backbone" with one or more protein secondary structures, the protein domains. Amino acid side chains may interact and bond in a number of ways. The interactions and bonds of side chains within a particular protein determine its tertiary structure. The protein tertiary structure is defined by its atomic coordinates. These coordinates may refer either to a protein domain or to the entire tertiary structure. A number of tertiary structures may fold into a quaternary structure.

Protein engineering is the process of developing useful or valuable proteins through the design and production of unnatural polypeptides, often by altering amino acid sequences found in nature. It is a young discipline, with much research taking place into the understanding of protein folding and recognition for protein design principles. It has been used to improve the function of many enzymes for industrial catalysis. It is also a product and services market, with an estimated value of $168 billion by 2017.

<span class="mw-page-title-main">Protein structure prediction</span> Type of biological prediction

Protein structure prediction is the inference of the three-dimensional structure of a protein from its amino acid sequence—that is, the prediction of its secondary and tertiary structure from primary structure. Structure prediction is different from the inverse problem of protein design. Protein structure prediction is one of the most important goals pursued by computational biology; and it is important in medicine and biotechnology.

<span class="mw-page-title-main">Structural alignment</span> Aligning molecular sequences using sequence and structural information

Structural alignment attempts to establish homology between two or more polymer structures based on their shape and three-dimensional conformation. This process is usually applied to protein tertiary structures but can also be used for large RNA molecules. In contrast to simple structural superposition, where at least some equivalent residues of the two structures are known, structural alignment requires no a priori knowledge of equivalent positions. Structural alignment is a valuable tool for the comparison of proteins with low sequence similarity, where evolutionary relationships between proteins cannot be easily detected by standard sequence alignment techniques. Structural alignment can therefore be used to imply evolutionary relationships between proteins that share very little common sequence. However, caution should be used in using the results as evidence for shared evolutionary ancestry because of the possible confounding effects of convergent evolution by which multiple unrelated amino acid sequences converge on a common tertiary structure.

<span class="mw-page-title-main">Structural bioinformatics</span> Bioinformatics subfield

Structural bioinformatics is the branch of bioinformatics that is related to the analysis and prediction of the three-dimensional structure of biological macromolecules such as proteins, RNA, and DNA. It deals with generalizations about macromolecular 3D structures such as comparisons of overall folds and local motifs, principles of molecular folding, evolution, binding interactions, and structure/function relationships, working both from experimentally solved structures and from computational models. The term structural has the same meaning as in structural biology, and structural bioinformatics can be seen as a part of computational structural biology. The main objective of structural bioinformatics is the creation of new methods of analysing and manipulating biological macromolecular data in order to solve problems in biology and generate new knowledge.

<span class="mw-page-title-main">Protein structure</span> Three-dimensional arrangement of atoms in an amino acid-chain molecule

Protein structure is the three-dimensional arrangement of atoms in an amino acid-chain molecule. Proteins are polymers – specifically polypeptides – formed from sequences of amino acids, which are the monomers of the polymer. A single amino acid monomer may also be called a residue, which indicates a repeating unit of a polymer. Proteins form by amino acids undergoing condensation reactions, in which the amino acids lose one water molecule per reaction in order to attach to one another with a peptide bond. By convention, a chain under 30 amino acids is often identified as a peptide, rather than a protein. To be able to perform their biological function, proteins fold into one or more specific spatial conformations driven by a number of non-covalent interactions, such as hydrogen bonding, ionic interactions, Van der Waals forces, and hydrophobic packing. To understand the functions of proteins at a molecular level, it is often necessary to determine their three-dimensional structure. This is the topic of the scientific field of structural biology, which employs techniques such as X-ray crystallography, NMR spectroscopy, cryo-electron microscopy (cryo-EM) and dual polarisation interferometry, to determine the structure of proteins.

Lattice proteins are highly simplified models of protein-like heteropolymer chains on lattice conformational space which are used to investigate protein folding. Simplification in lattice proteins is twofold: each whole residue is modeled as a single "bead" or "point" of a finite set of types, and each residue is restricted to be placed on vertices of a lattice. To guarantee the connectivity of the protein chain, adjacent residues on the backbone must be placed on adjacent vertices of the lattice. Steric constraints are expressed by imposing that no more than one residue can be placed on the same lattice vertex.

<span class="mw-page-title-main">Docking (molecular)</span> Prediction method in molecular modeling

In the field of molecular modeling, docking is a method which predicts the preferred orientation of one molecule to a second when a ligand and a target are bound to each other to form a stable complex. Knowledge of the preferred orientation in turn may be used to predict the strength of association or binding affinity between two molecules using, for example, scoring functions.

Macromolecular docking is the computational modelling of the quaternary structure of complexes formed by two or more interacting biological macromolecules. Protein–protein complexes are the most commonly attempted targets of such modelling, followed by protein–nucleic acid complexes.

<span class="mw-page-title-main">Foldamer</span> Chain molecule which folds in predictable ways while in solution

In chemistry, a foldamer is a discrete chain molecule (oligomer) that folds into a conformationally ordered state in solution. They are artificial molecules that mimic the ability of proteins, nucleic acids, and polysaccharides to fold into well-defined conformations, such as α-helices and β-sheets. The structure of a foldamer is stabilized by noncovalent interactions between nonadjacent monomers. Foldamers are studied with the main goal of designing large molecules with predictable structures. The study of foldamers is related to the themes of molecular self-assembly, molecular recognition, and host–guest chemistry.

<span class="mw-page-title-main">TIM barrel</span> Protein fold

The TIM barrel, also known as an alpha/beta barrel, is a conserved protein fold consisting of eight alpha helices (α-helices) and eight parallel beta strands (β-strands) that alternate along the peptide backbone. The structure is named after triose-phosphate isomerase, a conserved metabolic enzyme. TIM barrels are ubiquitous, with approximately 10% of all enzymes adopting this fold. Further, five of seven enzyme commission (EC) enzyme classes include TIM barrel proteins. The TIM barrel fold is evolutionarily ancient, with many of its members possessing little similarity today, instead falling within the twilight zone of sequence similarity.

The dead-end elimination algorithm (DEE) is a method for minimizing a function over a discrete set of independent variables. The basic idea is to identify "dead ends", i.e., combinations of variables that are not necessary to define a global minimum because there is always a way of replacing such combination by a better or equivalent one. Then we can refrain from searching such combinations further. Hence, dead-end elimination is a mirror image of dynamic programming, in which "good" combinations are identified and explored further.

In chemical thermodynamics, conformational entropy is the entropy associated with the number of conformations of a molecule. The concept is most commonly applied to biological macromolecules such as proteins and RNA, but also be used for polysaccharides and other molecules. To calculate the conformational entropy, the possible conformations of the molecule may first be discretized into a finite number of states, usually characterized by unique combinations of certain structural parameters, each of which has been assigned an energy. In proteins, backbone dihedral angles and side chain rotamers are commonly used as parameters, and in RNA the base pairing pattern may be used. These characteristics are used to define the degrees of freedom. The conformational entropy associated with a particular structure or state, such as an alpha-helix, a folded or an unfolded protein structure, is then dependent on the probability of the occupancy of that structure.

In computational biology, de novo protein structure prediction refers to an algorithmic process by which protein tertiary structure is predicted from its amino acid primary sequence. The problem itself has occupied leading scientists for decades while still remaining unsolved. According to Science, the problem remains one of the top 125 outstanding issues in modern science. At present, some of the most successful methods have a reasonable probability of predicting the folds of small, single-domain proteins within 1.5 angstroms over the entire structure.

<span class="mw-page-title-main">Protein dynamics</span>

Proteins are generally thought to adopt unique structures determined by their amino acid sequences. However, proteins are not strictly static objects, but rather populate ensembles of conformations. Transitions between these states occur on a variety of length scales and time scales , and have been linked to functionally relevant phenomena such as allosteric signaling and enzyme catalysis.

FoldX is a protein design algorithm that uses an empirical force field. It can determine the energetic effect of point mutations as well as the interaction energy of protein complexes. FoldX can mutate protein and DNA side chains using a probability-based rotamer library, while exploring alternative conformations of the surrounding side chains.

Protein backbone fragment libraries have been used successfully in a variety of structural biology applications, including homology modeling, de novo structure prediction, and structure determination. By reducing the complexity of the search space, these fragment libraries enable more rapid search of conformational space, leading to more efficient and accurate models.

Graphical models have become powerful frameworks for protein structure prediction, protein–protein interaction, and free energy calculations for protein structures. Using a graphical model to represent the protein structure allows the solution of many problems including secondary structure prediction, protein-protein interactions, protein-drug interaction, and free energy calculations.

<span class="mw-page-title-main">Backbone-dependent rotamer library</span> Collection of data on conformations of a given proteins amino acid side chains

In biochemistry, a backbone-dependent rotamer library provides the frequencies, mean dihedral angles, and standard deviations of the discrete conformations of the amino acid side chains in proteins as a function of the backbone dihedral angles φ and ψ of the Ramachandran map. By contrast, backbone-independent rotamer libraries express the frequencies and mean dihedral angles for all side chains in proteins, regardless of the backbone conformation of each residue type. Backbone-dependent rotamer libraries have been shown to have significant advantages over backbone-independent rotamer libraries, principally when used as an energy term, by speeding up search times of side-chain packing algorithms used in protein structure prediction and protein design.

References

  1. Korendovych, Ivan (March 19, 2018). "Minimalist design of peptide and protein catalysts". American Chemical Society. Retrieved March 22, 2018.
  2. 1 2 3 4 5 6 Richardson, JS; Richardson, DC (July 1989). "The de novo design of protein structures". Trends in Biochemical Sciences. 14 (7): 304–9. doi:10.1016/0968-0004(89)90070-4. PMID   2672455.
  3. 1 2 3 Dahiyat, BI; Mayo, SL (October 3, 1997). "De novo protein design: fully automated sequence selection". Science. 278 (5335): 82–7. CiteSeerX   10.1.1.72.7304 . doi:10.1126/science.278.5335.82. PMID   9311930.
  4. 1 2 Gordon, DB; Marshall, SA; Mayo, SL (August 1999). "Energy functions for protein design". Current Opinion in Structural Biology. 9 (4): 509–13. doi:10.1016/s0959-440x(99)80072-4. PMID   10449371.
  5. 1 2 Harbury, PB; Plecs, JJ; Tidor, B; Alber, T; Kim, PS (November 20, 1998). "High-resolution protein design with backbone freedom". Science. 282 (5393): 1462–7. doi:10.1126/science.282.5393.1462. PMID   9822371.
  6. 1 2 3 Kuhlman, B; Dantas, G; Ireton, GC; Varani, G; Stoddard, BL; Baker, D (November 21, 2003). "Design of a novel globular protein fold with atomic-level accuracy". Science. 302 (5649): 1364–8. Bibcode:2003Sci...302.1364K. doi:10.1126/science.1089427. PMID   14631033. S2CID   1939390.
  7. Sterner, R; Merkl, R; Raushel, FM (May 2008). "Computational design of enzymes". Chemistry & Biology. 15 (5): 421–3. doi: 10.1016/j.chembiol.2008.04.007 . PMID   18482694.
  8. Wu, X; Yang, ZY; Li, Y; Hogerkorp, CM; Schief, WR; Seaman, MS; Zhou, T; Schmidt, SD; Wu, L; Xu, L; Longo, NS; McKee, K; O'Dell, S; Louder, MK; Wycuff, DL; Feng, Y; Nason, M; Doria-Rose, N; Connors, M; Kwong, PD; Roederer, M; Wyatt, RT; Nabel, GJ; Mascola, JR (August 13, 2010). "Rational design of envelope identifies broadly neutralizing human monoclonal antibodies to HIV-1". Science. 329 (5993): 856–61. Bibcode:2010Sci...329..856W. doi:10.1126/science.1187659. PMC   2965066 . PMID   20616233.
  9. Höcker, B (November 8, 2012). "Structural biology: A toolbox for protein design". Nature. 491 (7423): 204–5. Bibcode:2012Natur.491..204H. doi: 10.1038/491204a . PMID   23135466. S2CID   4426247.
  10. 1 2 3 Lovell, SC; Word, JM; Richardson, JS; Richardson, DC (August 15, 2000). "The penultimate rotamer library". Proteins. 40 (3): 389–408. CiteSeerX   10.1.1.555.4071 . doi:10.1002/1097-0134(20000815)40:3<389::AID-PROT50>3.0.CO;2-2. PMID   10861930. S2CID   3055173.
  11. Shapovalov, MV; Dunbrack RL, Jr (June 8, 2011). "A smoothed backbone-dependent rotamer library for proteins derived from adaptive kernel density estimates and regressions". Structure. 19 (6): 844–58. doi:10.1016/j.str.2011.03.019. PMC   3118414 . PMID   21645855.
  12. 1 2 Samish, I; MacDermaid, CM; Perez-Aguilar, JM; Saven, JG (2011). "Theoretical and computational protein design". Annual Review of Physical Chemistry. 62: 129–49. Bibcode:2011ARPC...62..129S. doi:10.1146/annurev-physchem-032210-103509. PMID   21128762.
  13. 1 2 Mandell, DJ; Kortemme, T (August 2009). "Backbone flexibility in computational protein design" (PDF). Current Opinion in Biotechnology. 20 (4): 420–8. doi:10.1016/j.copbio.2009.07.006. PMID   19709874.
  14. 1 2 3 4 5 6 Donald, Bruce R. (2011). Algorithms in Structural Molecular Biology. Cambridge, MA: MIT Press.
  15. 1 2 Boas, F. E. & Harbury, P. B. (2007). "Potential energy functions for protein design". Current Opinion in Structural Biology. 17 (2): 199–204. doi:10.1016/j.sbi.2007.03.006. PMID   17387014.
  16. 1 2 3 4 Boas, FE; Harbury, PB (April 2007). "Potential energy functions for protein design". Current Opinion in Structural Biology. 17 (2): 199–204. doi:10.1016/j.sbi.2007.03.006. PMID   17387014.
  17. Vizcarra, CL; Mayo, SL (December 2005). "Electrostatics in computational protein design". Current Opinion in Chemical Biology. 9 (6): 622–6. doi:10.1016/j.cbpa.2005.10.014. PMID   16257567.
  18. Zhou, T; Georgiev, I; Wu, X; Yang, ZY; Dai, K; Finzi, A; Kwon, YD; Scheid, JF; Shi, W; Xu, L; Yang, Y; Zhu, J; Nussenzweig, MC; Sodroski, J; Shapiro, L; Nabel, GJ; Mascola, JR; Kwong, PD (August 13, 2010). "Structural basis for broad and potent neutralization of HIV-1 by antibody VRC01". Science. 329 (5993): 811–7. Bibcode:2010Sci...329..811Z. doi:10.1126/science.1192819. PMC   2981354 . PMID   20616231.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  19. Mendes, J; Guerois, R; Serrano, L (August 2002). "Energy estimation in protein design". Current Opinion in Structural Biology. 12 (4): 441–6. doi:10.1016/s0959-440x(02)00345-7. PMID   12163065.
  20. Pierce, NA; Winfree, E (October 2002). "Protein design is NP-hard". Protein Engineering. 15 (10): 779–82. doi: 10.1093/protein/15.10.779 . PMID   12468711.
  21. 1 2 Voigt, CA; Gordon, DB; Mayo, SL (June 9, 2000). "Trading accuracy for speed: A quantitative comparison of search algorithms in protein sequence design". Journal of Molecular Biology. 299 (3): 789–803. CiteSeerX   10.1.1.138.2023 . doi:10.1006/jmbi.2000.3758. PMID   10835284.
  22. Hong, EJ; Lippow, SM; Tidor, B; Lozano-Pérez, T (September 2009). "Rotamer optimization for protein design through MAP estimation and problem-size reduction". Journal of Computational Chemistry. 30 (12): 1923–45. doi:10.1002/jcc.21188. PMC   3495010 . PMID   19123203.
  23. "Machine learning reveals recipe for building artificial proteins". phys.org. Retrieved August 17, 2020.
  24. Russ, William P.; Figliuzzi, Matteo; Stocker, Christian; Barrat-Charlaix, Pierre; Socolich, Michael; Kast, Peter; Hilvert, Donald; Monasson, Remi; Cocco, Simona; Weigt, Martin; Ranganathan, Rama (2020). "An evolution-based model for designing chorismatemutase enzymes". Science. 369 (6502): 440–445. Bibcode:2020Sci...369..440R. doi:10.1126/science.aba3304. PMID   32703877. S2CID   220714458.
  25. "Biologists train AI to generate medicines and vaccines". University of Washington-Harborview Medical Center.
  26. Wang, Jue; Lisanza, Sidney; Juergens, David; Tischer, Doug; Watson, Joseph L.; Castro, Karla M.; Ragotte, Robert; Saragovi, Amijai; Milles, Lukas F.; Baek, Minkyung; Anishchenko, Ivan; Yang, Wei; Hicks, Derrick R.; Expòsit, Marc; Schlichthaerle, Thomas; Chun, Jung-Ho; Dauparas, Justas; Bennett, Nathaniel; Wicky, Basile I. M.; Muenks, Andrew; DiMaio, Frank; Correia, Bruno; Ovchinnikov, Sergey; Baker, David (July 22, 2022). "Scaffolding protein functional sites using deep learning" (PDF). Science. 377 (6604): 387–394. Bibcode:2022Sci...377..387W. doi:10.1126/science.abn2100. ISSN   0036-8075. PMC   9621694 . PMID   35862514.
  27. Gordon, DB; Mayo, SL (September 15, 1999). "Branch-and-terminate: a combinatorial optimization algorithm for protein design". Structure. 7 (9): 1089–98. doi: 10.1016/s0969-2126(99)80176-2 . PMID   10508778.
  28. 1 2 Leach, AR; Lemon, AP (November 1, 1998). "Exploring the conformational space of protein side chains using dead-end elimination and the A* algorithm". Proteins. 33 (2): 227–39. CiteSeerX   10.1.1.133.7986 . doi:10.1002/(sici)1097-0134(19981101)33:2<227::aid-prot7>3.0.co;2-f. PMID   9779790. S2CID   12872539.
  29. 1 2 Kingsford, CL; Chazelle, B; Singh, M (April 1, 2005). "Solving and analyzing side-chain positioning problems using linear and integer programming". Bioinformatics. 21 (7): 1028–36. doi: 10.1093/bioinformatics/bti144 . PMID   15546935.
  30. Yanover, Chen; Talya Meltzer; Yair Weiss (2006). "Linear Programming Relaxations and Belief Propagation – An Empirical Study". Journal of Machine Learning Research. 7: 1887–1907.
  31. Wainwright, Martin J; Tommi S. Jaakkola; Alan S. Willsky (2005). "MAP estimation via agreement on trees: message-passing and linear programming". IEEE Transactions on Information Theory. 51 (11): 3697–3717. CiteSeerX   10.1.1.71.9565 . doi:10.1109/tit.2005.856938. S2CID   10007532.
  32. Kolmogorov, Vladimir (October 28, 2006). "Convergent tree-reweighted message passing for energy minimization". IEEE Transactions on Pattern Analysis and Machine Intelligence. 28 (10): 1568–1583. doi:10.1109/TPAMI.2006.200. PMID   16986540. S2CID   8616813.
  33. Globerson, Amir; Tommi S. Jaakkola (2007). "Fixing max-product: Convergent message passing algorithms for MAP LP-relaxations". Advances in Neural Information Processing Systems.
  34. Allen, BD; Mayo, SL (July 30, 2006). "Dramatic performance enhancements for the FASTER optimization algorithm". Journal of Computational Chemistry. 27 (10): 1071–5. CiteSeerX   10.1.1.425.5418 . doi:10.1002/jcc.20420. PMID   16685715. S2CID   769053.
  35. Desmet, J; Spriet, J; Lasters, I (July 1, 2002). "Fast and accurate side-chain topology and energy refinement (FASTER) as a new method for protein structure optimization". Proteins. 48 (1): 31–43. doi:10.1002/prot.10131. PMID   12012335. S2CID   21524437.
  36. Baker, D (October 2010). "An exciting but challenging road ahead for computational enzyme design". Protein Science. 19 (10): 1817–9. doi:10.1002/pro.481. PMC   2998717 . PMID   20717908.
  37. Jiang, Lin; Althoff, Eric A.; Clemente, Fernando R.; Doyle, Lindsey; Rothlisberger, Daniela; Zanghellini, Alexandre; Gallaher, Jasmine L.; Betker, Jamie L.; Tanaka, Fujie (2008). "De Novo Computational Design of Retro-Aldol Enzymes". Science. 319 (5868): 1387–91. Bibcode:2008Sci...319.1387J. doi:10.1126/science.1152692. PMC   3431203 . PMID   18323453.
  38. Röthlisberger, Daniela; Khersonsky, Olga; Wollacott, Andrew M.; Jiang, Lin; Dechancie, Jason; Betker, Jamie; Gallaher, Jasmine L.; Althoff, Eric A.; Zanghellini, Alexandre (2008). "Kemp elimination catalysts by computational enzyme design". Nature. 453 (7192): 190–5. Bibcode:2008Natur.453..190R. doi: 10.1038/nature06879 . PMID   18354394.
  39. Siegel, JB; Zanghellini, A; Lovick, HM; Kiss, G; Lambert, AR; St Clair, JL; Gallaher, JL; Hilvert, D; Gelb, MH; Stoddard, BL; Houk, KN; Michael, FE; Baker, D (July 16, 2010). "Computational design of an enzyme catalyst for a stereoselective bimolecular Diels-Alder reaction". Science. 329 (5989): 309–13. Bibcode:2010Sci...329..309S. doi:10.1126/science.1190239. PMC   3241958 . PMID   20647463.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  40. Privett, HK; Kiss, G; Lee, TM; Blomberg, R; Chica, RA; Thomas, LM; Hilvert, D; Houk, KN; Mayo, SL (March 6, 2012). "Iterative approach to computational enzyme design". Proceedings of the National Academy of Sciences of the United States of America. 109 (10): 3790–5. Bibcode:2012PNAS..109.3790P. doi: 10.1073/pnas.1118082108 . PMC   3309769 . PMID   22357762.
  41. Chen, CY; Georgiev, I; Anderson, AC; Donald, BR (March 10, 2009). "Computational structure-based redesign of enzyme activity". Proceedings of the National Academy of Sciences of the United States of America. 106 (10): 3764–9. Bibcode:2009PNAS..106.3764C. doi: 10.1073/pnas.0900266106 . PMC   2645347 . PMID   19228942.
  42. 1 2 3 4 Karanicolas, J; Kuhlman, B (August 2009). "Computational design of affinity and specificity at protein–protein interfaces". Current Opinion in Structural Biology. 19 (4): 458–63. doi:10.1016/j.sbi.2009.07.005. PMC   2882636 . PMID   19646858.
  43. Shoichet, BK (October 2007). "No free energy lunch". Nature Biotechnology. 25 (10): 1109–10. doi:10.1038/nbt1007-1109. PMID   17921992. S2CID   5527226.
  44. Lippow, SM; Wittrup, KD; Tidor, B (October 2007). "Computational design of antibody-affinity improvement beyond in vivo maturation". Nature Biotechnology. 25 (10): 1171–6. doi:10.1038/nbt1336. PMC   2803018 . PMID   17891135.
  45. Schreiber, G; Keating, AE (February 2011). "Protein binding specificity versus promiscuity". Current Opinion in Structural Biology. 21 (1): 50–61. doi:10.1016/j.sbi.2010.10.002. PMC   3053118 . PMID   21071205.
  46. Grigoryan, G; Reinke, AW; Keating, AE (April 16, 2009). "Design of protein-interaction specificity gives selective bZIP-binding peptides". Nature. 458 (7240): 859–64. Bibcode:2009Natur.458..859G. doi:10.1038/nature07885. PMC   2748673 . PMID   19370028.
  47. Frey, KM; Georgiev, I; Donald, BR; Anderson, AC (August 3, 2010). "Predicting resistance mutations using protein design algorithms". Proceedings of the National Academy of Sciences of the United States of America. 107 (31): 13707–12. Bibcode:2010PNAS..10713707F. doi: 10.1073/pnas.1002162107 . PMC   2922245 . PMID   20643959.
  48. Khoury, GA; Fazelinia, H; Chin, JW; Pantazes, RJ; Cirino, PC; Maranas, CD (October 2009). "Computational design of Candida boidinii xylose reductase for altered cofactor specificity". Protein Science. 18 (10): 2125–38. doi:10.1002/pro.227. PMC   2786976 . PMID   19693930.
  49. Burton, DR; Weiss, RA (August 13, 2010). "AIDS/HIV. A boost for HIV vaccine design". Science. 329 (5993): 770–3. Bibcode:2010Sci...329..770B. doi:10.1126/science.1194693. PMID   20705840. S2CID   206528638.
  50. Jessica Marshall (November 7, 2012). "Proteins made to order". Nature News. Retrieved November 17, 2012.
  51. Designed transmembrane alpha-hairpin proteins in OPM database
  52. Designed membrane-associated peptides and proteins in OPM database
  53. Chowdhury, Ratul; Kumar, Manish; Maranas, Costas D.; Golbeck, John H.; Baker, Carol; Prabhakar, Jeevan; Grisewood, Matthew; Decker, Karl; Shankla, Manish (September 10, 2018). "PoreDesigner for tuning solute selectivity in a robust and highly permeable outer membrane pore". Nature Communications. 9 (1): 3661. Bibcode:2018NatCo...9.3661C. doi:10.1038/s41467-018-06097-1. ISSN   2041-1723. PMC   6131167 . PMID   30202038.
  54. Looger, Loren L.; Dwyer, Mary A.; Smith, James J. & Hellinga, Homme W. (2003). "Computational design of receptor and sensor proteins with novel functions". Nature . 423 (6936): 185–190. Bibcode:2003Natur.423..185L. doi:10.1038/nature01556. PMID   12736688. S2CID   4387641.
  55. Jha, RK; Wu, YI; Zawistowski, JS; MacNevin, C; Hahn, KM; Kuhlman, B (October 21, 2011). "Redesign of the PAK1 autoinhibitory domain for enhanced stability and affinity in biosensor applications". Journal of Molecular Biology. 413 (2): 513–22. doi:10.1016/j.jmb.2011.08.022. PMC   3202338 . PMID   21888918.

Further reading