Acronym | ISSN |
---|---|
Organisation | ISSN International Centre |
Introduced | 1976 |
No. issued | > 2,500,000 |
No. of digits | 8 |
Check digit | Weighted sum |
Example | 2049-3630 |
Website | www |
An International Standard Serial Number (ISSN) is an eight-digit serial number used to uniquely identify a serial publication (periodical), such as a magazine. [1] The ISSN is especially helpful in distinguishing between serials with the same title. ISSNs are used in ordering, cataloging, interlibrary loans, and other practices in connection with serial literature. [2]
The ISSN system was first drafted as an International Organization for Standardization (ISO) international standard in 1971 and published as ISO 3297 in 1975. [3] ISO subcommittee TC 46/SC 9 is responsible for maintaining the standard.
When a serial with the same content is published in more than one media type, a different ISSN is assigned to each media type. For example, many serials are published both in print and electronic media. The ISSN system refers to these types as print ISSN (p-ISSN) and electronic ISSN (e-ISSN). [4] Consequently, as defined in ISO 3297:2007, every serial in the ISSN system is also assigned a linking ISSN (ISSN-L), typically the same as the ISSN assigned to the serial in its first published medium, which links together all ISSNs assigned to the serial in every medium. [5]
An ISSN is an eight-digit code, divided by a hyphen into two four-digit numbers. [1] The last digit, which may be zero through nine or an X, is a check digit, so the ISSN is uniquely represented by its first seven digits. Formally, the general form of the ISSN (also named "ISSN structure" or "ISSN syntax") can be expressed as follows: [6]
NNNN-NNNC
where N
is in the set {0,1,2,...,9}, a decimal digit character, and C
is in {0,1,2,...,9,X}; or by a Perl Compatible Regular Expressions (PCRE) regular expression:
^[0-9]{4}-[0-9]{3}[0-9X]$
.For example, the ISSN of the journal Hearing Research , is 0378-5955, where the final 5 is the check digit, that is C
=5. To calculate the check digit, the following algorithm may be used:
The remainder of this sum modulo 11 is then calculated:
If there is no remainder, the check digit is 0; otherwise the remainder is subtracted from 11. If the result is less than 10, it yields the check digit: Thus, in this example, the check digit C
is 5.
To confirm the check digit, calculate the sum of all eight digits of the ISSN multiplied by their position in the number, counting from the right. (If the check digit is X, add 10 to the sum.) The remainder of the sum modulo 11 must be 0. There is an online ISSN checker that can validate an ISSN, based on the above algorithm. [7]
ISSNs can be encoded in EAN-13 bar codes with a 977 "country code" (compare the 978 country code ("bookland") for ISBNs), followed by the 7 main digits of the ISSN (the check digit is not included), followed by 2 publisher-defined digits, followed by the EAN check digit (which need not match the ISSN check digit). [8]
ISSN codes are assigned by a network of ISSN National Centres, usually located at national libraries and coordinated by the ISSN International Centre based in Paris. The International Centre is an intergovernmental organization created in 1974 through an agreement between UNESCO and the French government.
ISSN-L is a unique identifier for all versions of the serial containing the same content across different media. As defined by ISO 3297:2007, the "linking ISSN (ISSN-L)" provides a mechanism for collocation or linking among the different media versions of the same continuing resource. The ISSN-L is one of a serial's existing ISSNs, so does not change the use or assignment of "ordinary" ISSNs; [9] it is based on the ISSN of the first published medium version of the publication. If the print and online versions of the publication are published at the same time, the ISSN of the print version is chosen as the basis of the ISSN-L.
With ISSN-L is possible to designate one single ISSN for all those media versions of the title. The use of ISSN-L facilitates search, retrieval and delivery across all media versions for services like OpenURL, library catalogues, search engines or knowledge bases.
The International Centre maintains a database of all ISSNs assigned worldwide, the ISDS Register (International Serials Data System), otherwise known as the ISSN Register. At the end of 2016, [update] the ISSN Register contained records for 1,943,572 items. [10] The Register is not freely available for interrogation on the web, but is available by subscription.
https://www.worldcat.org/ISSN/
", e.g. n2:1021-9749 – Search Results. This does not query the ISSN Register itself, but rather shows whether any WorldCat library holds an item with the given ISSN.ISSN and ISBN codes are similar in concept, where ISBNs are assigned to individual books. An ISBN might be assigned for particular issues of a serial, in addition to the ISSN code for the serial as a whole. An ISSN, unlike the ISBN code, is an anonymous identifier associated with a serial title, containing no information as to the publisher or its location. For this reason a new ISSN is assigned to a serial each time it undergoes a major title change.
Since the ISSN applies to an entire serial, other identifiers have been built on top of it to allow references to specific volumes, articles, or other identifiable components (like the table of contents): the Publisher Item Identifier (PII) and the Serial Item and Contribution Identifier (SICI).
Separate ISSNs are needed for serials in different media (except reproduction microforms). Thus, the print and electronic media versions of a serial need separate ISSNs, [11] and CD-ROM versions and web versions require different ISSNs. However, the same ISSN can be used for different file formats (e.g. PDF and HTML) of the same online serial.
This "media-oriented identification" of serials made sense in the 1970s. In the 1990s and onward, with personal computers, better screens, and the Web, it makes sense to consider only content, independent of media. This "content-oriented identification" of serials was a repressed demand during a decade, but no ISSN update or initiative occurred. A natural extension for ISSN, the unique-identification of the articles in the serials, was the main demand application. An alternative serials' contents model arrived with the indecs Content Model and its application, the digital object identifier (DOI), an ISSN-independent initiative, consolidated in the 2000s.
Only later, in 2007, ISSN-L was defined in the new ISSN standard (ISO 3297:2007) as an "ISSN designated by the ISSN Network to enable collocation or versions of a continuing resource linking among the different media". [12]
An ISSN can be encoded as a uniform resource name (URN) by prefixing it with "urn:ISSN:
". [6] For example, Rail could be referred to as "urn:ISSN:0953-4563
". URN namespaces are case-sensitive, and the ISSN namespace is all caps. [13] If the checksum digit is "X" then it is always encoded in uppercase in a URN.
The URNs are content-oriented, but ISSN is media-oriented:
https://doi.org/10.1038/nature13777
, and is redirected (resolved) to the current article's page; but there is no ISSN online service, like http://dx.issn.org/
, to resolve the ISSN of the journal (in this sample 1476-4687).A unique URN for serials simplifies the search, recovery and delivery of data for various services including, in particular, search systems and knowledge databases. [12] ISSN-L (see Linking ISSN above) was created to fill this gap.
The two standard categories of media in which serials are most available are print and electronic. In metadata contexts (e.g., JATS), these may have standard labels.
p-ISSN is a standard label for "Print ISSN", the ISSN for the print media (paper) version of a serial. Usually it is the "default media" and so the "default ISSN".
e-ISSN (or eISSN) is a standard label for "Electronic ISSN", the ISSN for the electronic media (online) version of a serial. [15]
The International Standard Book Number (ISBN) is a numeric commercial book identifier that is intended to be unique. Publishers purchase or receive ISBNs from an affiliate of the International ISBN Agency.
The International Bank Account Number (IBAN) is an internationally agreed upon system of identifying bank accounts across national borders to facilitate the communication and processing of cross border transactions with a reduced risk of transcription errors. An IBAN uniquely identifies the account of a customer at a financial institution. It was originally adopted by the European Committee for Banking Standards (ECBS) and since 1997 as the international standard ISO 13616 under the International Organization for Standardization (ISO). The current version is ISO 13616:2020, which indicates the Society for Worldwide Interbank Financial Telecommunication (SWIFT) as the formal registrar. Initially developed to facilitate payments within the European Union, it has been implemented by most European countries and numerous countries in other parts of the world, mainly in the Middle East and the Caribbean. By July 2024, 88 countries were using the IBAN numbering system.
A serial number is a unique identifier used to uniquely identify an item, and is usually assigned incrementally or sequentially.
A vehicle identification number is a unique code, including a serial number, used by the automotive industry to identify individual motor vehicles, towed vehicles, motorcycles, scooters and mopeds, as defined by the International Organization for Standardization in ISO 3779 and ISO 4030.
A digital object identifier (DOI) is a persistent identifier or handle used to uniquely identify various objects, standardized by the International Organization for Standardization (ISO). DOIs are an implementation of the Handle System; they also fit within the URI system. They are widely used to identify academic, professional, and government information, such as journal articles, research reports, data sets, and official publications.
The Electronic Product Code (EPC) is designed as a universal identifier that provides a unique identity for every physical object anywhere in the world, for all time. The EPC structure is defined in the EPCglobal Tag Data Standard, which is a freely available standard. The canonical representation of an EPC is a URI, namely the 'pure-identity URI' representation that is intended for use when referring to a specific physical object in communications about EPCs among information systems and business application software.
In the United States, an ABA routing transit number is a nine-digit code printed on the bottom of checks to identify the financial institution on which it was drawn. The American Bankers Association (ABA) developed the system in 1910 to facilitate the sorting, bundling, and delivering of paper checks to the drawer's bank for debit to the drawer's account.
Registration authorities (RAs) exist for many standards organizations, such as ANNA, the Object Management Group, W3C, and others. In general, registration authorities all perform a similar function, in promoting the use of a particular standard through facilitating its use. This may be by applying the standard, where appropriate, or by verifying that a particular application satisfies the standard's tenants. Maintenance agencies, in contrast, may change an element in a standard based on set rules – such as the creation or change of a currency code when a currency is created or revalued. The Object Management Group has an additional concept of certified provider, which is deemed an entity permitted to perform some functions on behalf of the registration authority, under specific processes and procedures documented within the standard for such a role.
International Standard Audiovisual Number (ISAN) is a unique identifier for audiovisual works and related versions, similar to ISBN for books. It was developed within an ISO TC46/SC9 working group. ISAN is managed and run by ISAN-IA.
The International Standard Recording Code (ISRC) is an international standard code for uniquely identifying sound recordings and music video recordings. The code was developed by the recording industry in conjunction with the ISO technical committee 46, subcommittee 9, which codified the standard as ISO 3901 in 1986, and updated it in 2001.
ISO 6346 is an international standard covering the coding, identification and marking of intermodal (shipping) containers used within containerized intermodal freight transport by the International Organization for Standardization (ISO). The standard establishes a visual identification system for every container that includes a unique serial number, the owner, a country code, a size, type and equipment category as well as any operational marks. The register of container owners is managed by the International Container Bureau (BIC).
The International Standard Music Number or ISMN is a thirteen-character alphanumeric identifier for printed music developed by ISO.
The International Standard Text Code (ISTC) is a unique identifier for text-based works. The ISO standard was developed by TC 46/SC 9 and published in March 2009 as ISO 21047:2009. The authority responsible for implementing the standard was assigned to The International ISTC AgencyArchived 2014-07-15 at the Wayback Machine. That Agency ceased operations in 2017. Following a public call for a new organization to support the maintenance and registration of ISTC data in which no other organizations stepped forward, and a subsequent report produced by ISO TC 46/SC 9 on text identification, the ISTC standard was withdrawn from the ISO catalogue of standards in August 2021.
The International Article Number is a standard describing a barcode symbology and numbering system used in global trade to identify a specific retail product type, in a specific packaging configuration, from a specific manufacturer. The standard has been subsumed in the Global Trade Item Number standard from the GS1 organization; the same numbers can be referred to as GTINs and can be encoded in other barcode symbologies, defined by GS1. EAN barcodes are used worldwide for lookup at retail point of sale, but can also be used as numbers for other purposes such as wholesale ordering or accounting. These barcodes only represent the digits 0–9, unlike some other barcode symbologies which can represent additional characters.
A unique identifier (UID) is an identifier that is guaranteed to be unique among all identifiers used for those objects and for a specific purpose. The concept was formalized early in the development of computer science and information systems. In general, it was associated with an atomic data type.
CODEN – according to ASTM standard E250 – is a six-character, alphanumeric bibliographic code that provides concise, unique and unambiguous identification of the titles of periodicals and non-serial publications from all subject areas.
The Serial Item and Contribution Identifier (SICI) was a code used to uniquely identify specific volumes, articles or other identifiable parts of a serial. It was "intended primarily for use by those members of the bibliographic community involved in the use or management of serial titles and their contributions". Developed over 1993–1995, NISO adopted SICI as a standard in 1996, then reaffirmed it in 2002. It was withdrawn in 2012.
The International Standard Name Identifier (ISNI) is an identifier system for uniquely identifying the public identities of contributors to media content such as books, television programmes, and newspaper articles. Such an identifier consists of 16 digits. It can optionally be displayed as divided into four blocks.
The International Standard Link Identifier (ISLI), is an identifier standard. ISLI is a universal identifier for links between entities in the field of information and documentation. It was developed by the International Organization for Standardization (ISO) and published on May 15, 2015. ISO/TC 46/SC 9 is responsible for the development of the ISLI standard.
A CN Serial Number is a serial number given by the National Press and Publication Administration used to uniquely identify a serial publication published in China.