Gold(I) bromide

Last updated
Gold(I) bromide
AuBr.png
Names
IUPAC name
gold(I) bromide
Other names
Aurous bromide
Gold monobromide
Gold(I) bromide
Identifiers
3D model (JSmol)
ChemSpider
EC Number
  • 260-763-2
PubChem CID
  • Br[Au]
Properties
AuBr
Molar mass 276.87 g/mol
Appearancelemon yellow crystals (AuBr-I), yellow-brown (AuBr-P)
Density 7.9 g/cm3
Melting point 165 °C (329 °F; 438 K) (decomposes)
61.0·10−6 cm3/mol
Hazards
NFPA 704 (fire diamond)
3
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

Gold(I) bromide can be formed by synthesis from the elements or partial decomposition of gold(III) bromide by careful control of temperatures and pressures.

Contents

Structure

It occurs in two modifications. One (I-AuBr) is isostructural with gold(I) chloride and has a body centered tetragonal unit cell with a = 6.734 Å, c = 8.674 Å, and space group I41/amd. The other (P-AuBr) is isostructural with gold(I) iodide and has a primitive tetragonal cell a = 4.296 Å, c = 12.146 Å, and space group P42/ncm. Single crystals of both modifications have been grown by chemical vapor transport. [1] Small amounts of aluminium, gallium, or iron were used as catalysts for the transport process to obtain the I-AuBr modification.

The two structures both consist of -Br-Au-Br-Au-Br- polymeric zigzag chains, but they are stacked in a different arrangement. In the primitive tetragonal I-AuBr, the chains form layers (see figure) in contrast to the body centered P-AuBr, where they are more interwoven. Another difference is that the Au-Br-Au angle is only 77° in the former, but 92.3° in the latter.

Density functional calculations on the monohalides of group 11 (Cu, Ag, Au) [2] have tried to shed light on the question why gold halides form rather different, low symmetry structures rather than the cubic zinc blend or rock salt structures of the silver and copper halides. It was shown that this calculation technique accurately predicts which structure type should be stable. The peculiar structures of the gold halides are mostly a result of the relativistic effects that occur for the elements of the later periods of the periodic table.

Related Research Articles

<span class="mw-page-title-main">Bromine</span> Chemical element, symbol Br and atomic number 35

Bromine is a chemical element with the symbol Br and atomic number 35. It is a volatile red-brown liquid at room temperature that evaporates readily to form a similarly coloured vapour. Its properties are intermediate between those of chlorine and iodine. Isolated independently by two chemists, Carl Jacob Löwig and Antoine Jérôme Balard, its name was derived from the Ancient Greek βρῶμος (bromos) meaning "stench", referring to its sharp and pungent smell.

<span class="mw-page-title-main">Protactinium</span> Chemical element, symbol Pa and atomic number 91

Protactinium is a chemical element with the symbol Pa and atomic number 91. It is a dense, silvery-gray actinide metal which readily reacts with oxygen, water vapor and inorganic acids. It forms various chemical compounds in which protactinium is usually present in the oxidation state +5, but it can also assume +4 and even +3 or +2 states. Concentrations of protactinium in the Earth's crust are typically a few parts per trillion, but may reach up to a few parts per million in some uraninite ore deposits. Because of its scarcity, high radioactivity and high toxicity, there are currently no uses for protactinium outside scientific research, and for this purpose, protactinium is mostly extracted from spent nuclear fuel.

Gold halides are compounds of gold with the halogens.

<span class="mw-page-title-main">Silver bromide</span> Chemical compound

Silver bromide (AgBr) is a soft, pale-yellow, water-insoluble salt well known for its unusual sensitivity to light. This property has allowed silver halides to become the basis of modern photographic materials. AgBr is widely used in photographic films and is believed by some to have been used for making the Shroud of Turin. The salt can be found naturally as the mineral bromargyrite.

<span class="mw-page-title-main">Gold(III) bromide</span> Chemical compound

Gold(III) bromide is a dark-red to black crystalline solid. It has the empirical formula AuBr3, but exists primarily as a dimer with the molecular formula Au2Br6 in which two gold atoms are bridged by two bromine atoms. It is commonly referred to as gold(III) bromide, gold tribromide, and rarely but traditionally auric bromide, and sometimes as digold hexabromide. As is similar with the other gold halides, this compound is unique for being a coordination complex of a group 11 transition metal that is stable in an oxidation state of +3 whereas copper or silver complexes persist in oxidation states of +1 or +2.

The thallium halides include monohalides, where thallium has oxidation state +1, trihalides in which thallium generally has oxidation state +3, and some intermediate halides containing thallium with mixed +1 and +3 oxidation states. These materials find use in specialized optical settings, such as focusing elements in research spectrophotometers. Compared to the more common zinc selenide-based optics, materials such as thallium bromoiodide enable transmission at longer wavelengths. In the infrared, this allows for measurements as low as 350 cm−1 (28 μm), whereas zinc selenide is opaque by 21.5 μm, and ZnSe optics are generally only usable to 650 cm−1 (15 μm).

There are three sets of Indium halides, the trihalides, the monohalides, and several intermediate halides. In the monohalides the oxidation state of indium is +1 and their proper names are indium(I) fluoride, indium(I) chloride, indium(I) bromide and indium(I) iodide.

There are three sets of gallium halides, the trihalides where gallium has oxidation state +3, the intermediate halides containing gallium in oxidation states +1, +2 and +3 and some unstable monohalides, where gallium has oxidation state +1.

<span class="mw-page-title-main">Indium(I) bromide</span> Chemical compound

Indium(I) bromide is a chemical compound of indium and bromine. It is a red crystalline compound that is isostructural with β-TlI and has a distorted rock salt structure. Indium(I) bromide is generally made from the elements, heating indium metal with InBr3. It has been used in the sulfur lamp. In organic chemistry, it has been found to promote the coupling of α, α-dichloroketones to 1-aryl-butane-1,4-diones. Oxidative addition reactions with for example alkyl halides to give alkyl indium halides and with NiBr complexes to give Ni-In bonds are known. It is unstable in water decomposing into indium metal and indium tribromide. When indium dibromide is dissolved in water, InBr is produced as a, presumably, insoluble red precipitate, that then rapidly decomposes.

<span class="mw-page-title-main">Strontium bromide</span> Chemical compound

Strontium bromide is a chemical compound with a formula SrBr2. At room temperature it is a white, odourless, crystalline powder. Strontium bromide imparts a bright red colour in a flame test, showing the presence of strontium ions. It is used in flares and also has some pharmaceutical uses.

<span class="mw-page-title-main">Chloro(tetrahydrothiophene)gold(I)</span> Chemical compound

Chloro(tetrahydrothiophene)gold(I), abbreviated (tht)AuCl, is a coordination complex of gold. Like the dimethyl sulfide analog, this compound is used as a entry point to gold chemistry. The tetrahydrothiophene ligand is labile and is readily substituted with other stronger ligands.

Isostructural chemical compounds have similar chemical structures. "Isomorphous" when used in the relation to crystal structures is not synonymous: in addition to the same atomic connectivity that characterises isostructural compounds, isomorphous substances crystallise in the same space group and have the same unit cell dimensions. The IUCR definition used by crystallographers is:

Two crystals are said to be isostructural, if they have the same structure, but not necessarily the same cell dimensions nor the same chemical composition, and with a 'comparable' variability in the atomic coordinates to that of the cell dimensions and chemical composition. For instance, calcite CaCO3, sodium nitrate NaNO3 and iron borate FeBO3 are isostructural. One also speaks of isostructural series, or of isostructural polymorphs or isostructural phase transitions. The term isotypic is synonymous with isostructural.

<span class="mw-page-title-main">Uranium hexachloride</span> Chemical compound

Uranium hexachloride (UCl6) is an inorganic chemical compound of uranium in the +6 oxidation state. UCl6 is a metal halide composed of uranium and chlorine. It is a multi-luminescent dark green crystalline solid with a vapor pressure between 1-3 mmHg at 373.15 K. UCl6 is stable in a vacuum, dry air, nitrogen and helium at room temperature. It is soluble in carbon tetrachloride (CCl4). Compared to the other uranium halides, little is known about UCl6.

<span class="mw-page-title-main">Eosinophil peroxidase</span> Protein-coding gene in the species Homo sapiens

Eosinophil peroxidase is an enzyme found within the eosinophil granulocytes, innate immune cells of humans and mammals. This oxidoreductase protein is encoded by the gene EPX, expressed within these myeloid cells. EPO shares many similarities with its orthologous peroxidases, myeloperoxidase (MPO), lactoperoxidase (LPO), and thyroid peroxidase (TPO). The protein is concentrated in secretory granules within eosinophils. Eosinophil peroxidase is a heme peroxidase, its activities including the oxidation of halide ions to bacteriocidal reactive oxygen species, the cationic disruption of bacterial cell walls, and the post-translational modification of protein amino acid residues.

The telluride iodides are chemical compounds that contain both telluride ions (Te2−) and iodide ions (I). They are in the class of mixed anion compounds or chalcogenide halides.

<span class="mw-page-title-main">Pentaphenylphosphorus</span> Chemical compound

Pentaphenylphosphorus is an organic phosphorane containing five phenyl groups connected to a central phosphorus atom. The phosphorus atom is considered to be in the +5 oxidation state. The chemical formula could be written as P(C6H5)5 or Ph5P, where Ph represents the phenyl group. It was discovered and reported in 1949 by Georg Wittig.

<span class="mw-page-title-main">Zirconium(III) bromide</span> Chemical compound

Zirconium(III) bromide is an inorganic compound with the formula ZrBr3.

Protactinium(V) bromide is an inorganic compound. It is a halide of protactinium, consisting of protactinium and bromine. It is radioactive and has a chemical formula of PaBr5, which is a red crystal of the monoclinic crystal system.

<span class="mw-page-title-main">Protactinium(IV) bromide</span> Chemical compound

Protactinium(IV) bromide is an inorganic compound. It is an actinide halide, composed of protactinium and bromine. It is radioactive, and has the chemical formula of PaBr4. It may be due to the brown color of bromine that causes the appearance of protactinium(IV) bromide to be brown crystals. Its crystal structure is tetragonal. Protactinium(IV) bromide is sublimed in a vacuum at 400 °C. The protactinium(IV) halide closest in structure to protactinium(IV) bromide is protactinium(IV) chloride.

Protactinium compounds are compounds containing the element protactinium. These compounds usually have protactinium in the +5 oxidation state, although these compounds can also exist in the +2, +3 and +4 oxidation states.

References

  1. E.M.W. Janssen and G.A. Wiegers (1978). "Crystal growth and the crystal structures of two modifications of gold monobromide, I-AuBr and P-AuBr". Journal of the Less-Common Metals. 57 (2): P47–P57. doi:10.1016/0022-5088(78)90248-5.
  2. Tilo Söhnel, Holger Hermann and Peter Schwerdtfeger (2005). "Solid state density functional calculations for the group 11 monohalides". J. Phys. Chem. B. 109 (1): 526–531. doi:10.1021/jp046085y. PMID   16851044.