Rhenium heptafluoride

Last updated
Rhenium heptafluoride
ReF7 structure.png
Names
IUPAC name
rhenium heptafluoride, heptafluoridorhenium
Identifiers
3D model (JSmol)
ChemSpider
PubChem CID
UNII
  • InChI=1S/7FH.Re/h7*1H;/q;;;;;;;+7/p-7 X mark.svgN
    Key: HFHBKXWKPQUYIA-UHFFFAOYSA-G X mark.svgN
  • InChI=1/7FH.Re/h7*1H;/q;;;;;;;+7/p-7/rF7Re/c1-8(2,3,4,5,6)7
    Key: HFHBKXWKPQUYIA-KLJGHBABAK
  • F[Re](F)(F)(F)(F)(F)F
Properties
ReF7
Molar mass 319.196 g/mol
AppearanceBright yellow crystalline solid
Density 4.3 g/cm3
Melting point 48.3 °C (118.9 °F; 321.4 K)
Boiling point 73.72 °C (164.70 °F; 346.87 K)
Reacts
Vapor pressure 13.41 kPa [1]
Structure
triclinic, aP16
P1 (No. 2)
Thermochemistry
Enthalpy of fusion fHfus)
7.53 kJ/mol [1]
30.77 kJ/mol [1]
Related compounds
Related compounds
Osmium heptafluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Rhenium heptafluoride is the compound with the formula ReF7. It is a yellow low melting solid and is the only thermally stable metal heptafluoride. [2] It has a distorted pentagonal bipyramidal structure similar to IF7, which was confirmed by neutron diffraction at 1.5 K. [3] The structure is non-rigid, as evidenced by electron diffraction studies. [4]

Production, reactions and properties

Rhenium heptafluoride can be prepared from the elements at 400 °C: [5]

2 Re + 7 F2 → 2 ReF7

It also can be produced by the explosion of rhenium metal under sulfur hexafluoride. [6]

It hydrolyzes under a base to form perrhenic acid and hydrogen fluoride: [1]

ReF7 + 4H2O → HReO4 + 7HF

With fluoride donors such as CsF, the ReF
8
anion is formed, which has a square antiprismatic structure. [7] With antimony pentafluoride, SbF5, a fluoride acceptor, the ReF+
6
cation is formed. [5]

Related Research Articles

<span class="mw-page-title-main">Berkelium</span> Chemical element, symbol Bk and atomic number 97

Berkelium is a transuranic radioactive chemical element with the symbol Bk and atomic number 97. It is a member of the actinide and transuranium element series. It is named after the city of Berkeley, California, the location of the Lawrence Berkeley National Laboratory where it was discovered in December 1949. Berkelium was the fifth transuranium element discovered after neptunium, plutonium, curium and americium.

<span class="mw-page-title-main">Group 7 element</span> Group of chemical elements

Group 7, numbered by IUPAC nomenclature, is a group of elements in the periodic table. It contains manganese (Mn), technetium (Tc), rhenium (Re) and bohrium (Bh). This group lies in the d-block of the periodic table, and are hence transition metals. This group is sometimes called the manganese group or manganese family after its lightest member; however, the group itself has not acquired a trivial name because it belongs to the broader grouping of the transition metals.

Calcium fluoride is the inorganic compound of the elements calcium and fluorine with the formula CaF2. It is a white solid that is practically insoluble in water. It occurs as the mineral fluorite (also called fluorspar), which is often deeply coloured owing to impurities.

<span class="mw-page-title-main">Beryllium fluoride</span> Chemical compound

Beryllium fluoride is the inorganic compound with the formula BeF2. This white solid is the principal precursor for the manufacture of beryllium metal. Its structure resembles that of quartz, but BeF2 is highly soluble in water.

<span class="mw-page-title-main">Iodine heptafluoride</span> Chemical compound

Iodine heptafluoride, also known as iodine(VII) fluoride, is an interhalogen compound with the chemical formula IF7. It has an unusual pentagonal bipyramidal structure, as predicted by VSEPR theory. The molecule can undergo a pseudorotational rearrangement called the Bartell mechanism, which is like the Berry mechanism but for a heptacoordinated system. It forms colourless crystals, which melt at 4.5 °C: the liquid range is extremely narrow, with the boiling point at 4.77 °C. The dense vapor has a mouldy, acrid odour. The molecule has D5h symmetry.

<span class="mw-page-title-main">Xenon tetrafluoride</span> Chemical compound

Xenon tetrafluoride is a chemical compound with chemical formula XeF
4
. It was the first discovered binary compound of a noble gas. It is produced by the chemical reaction of xenon with fluorine:

<span class="mw-page-title-main">Xenon hexafluoride</span> Chemical compound

Xenon hexafluoride is a noble gas compound with the formula XeF6. It is one of the three binary fluorides of xenon that have been studied experimentally, the other two being XeF2 and XeF4. All known are exergonic and stable at normal temperatures. XeF6 is the strongest fluorinating agent of the series. It is a colorless solid that readily sublimes into intensely yellow vapors.

<span class="mw-page-title-main">Lithium fluoride</span> Chemical compound

Lithium fluoride is an inorganic compound with the chemical formula LiF. It is a colorless solid that transitions to white with decreasing crystal size. Although odorless, lithium fluoride has a bitter-saline taste. Its structure is analogous to that of sodium chloride, but it is much less soluble in water. It is mainly used as a component of molten salts. Partly because Li and F are both light elements, and partly because F2 is highly reactive, formation of LiF from the elements releases one of the highest energies per mass of reactants, second only to that of BeO.

<span class="mw-page-title-main">Silver(II) fluoride</span> Chemical compound

Silver(II) fluoride is a chemical compound with the formula AgF2. It is a rare example of a silver(II) compound. Silver usually exists in its +1 oxidation state. It is used as a fluorinating agent.

<span class="mw-page-title-main">Uranium pentafluoride</span> Chemical compound

Uranium pentafluoride is the inorganic compound with the chemical formula UF5. It is a pale yellow paramagnetic solid. The compound has attracted interest because it is related to uranium hexafluoride, which is widely used to produce uranium fuel. It crystallizes in two polymorphs, called α- and β-UF5.

<span class="mw-page-title-main">Technetium hexafluoride</span> Chemical compound

Technetium hexafluoride or technetium(VI) fluoride (TcF6) is a yellow inorganic compound with a low melting point. It was first identified in 1961. In this compound, technetium has an oxidation state of +6, the highest oxidation state found in the technetium halides. In this respect, technetium differs from rhenium, which forms a heptafluoride, ReF7. Technetium hexafluoride occurs as an impurity in uranium hexafluoride, as technetium is a fission product of uranium (spontaneous fission in natural uranium, possible contamination from induced fission inside the reactor in reprocessed uranium). The fact that the boiling point of the hexafluorides of uranium and technetium are very close to each other presents a problem in using fluoride volatility in nuclear reprocessing.

<span class="mw-page-title-main">Dioxygenyl</span> Chemical compound

The dioxygenyl ion, O+
2
, is a rarely-encountered oxycation in which both oxygen atoms have a formal oxidation state of +1/2. It is formally derived from oxygen by the removal of an electron:

A hexafluoride is a chemical compound with the general formula QXnF6, QXnF6m−, or QXnF6m+. Many molecules fit this formula. An important hexafluoride is hexafluorosilicic acid (H2SiF6), which is a byproduct of the mining of phosphate rock. In the nuclear industry, uranium hexafluoride (UF6) is an important intermediate in the purification of this element.

<span class="mw-page-title-main">Thiophosphoryl fluoride</span> Chemical compound

Thiophosphoryl fluoride is an inorganic molecular gas with formula PSF3 containing phosphorus, sulfur and fluorine. It spontaneously ignites in air and burns with a cool flame. The discoverers were able to have flames around their hands without discomfort, and called it "probably one of the coldest flames known". The gas was discovered in 1888.

Fluorine forms a great variety of chemical compounds, within which it always adopts an oxidation state of −1. With other atoms, fluorine forms either polar covalent bonds or ionic bonds. Most frequently, covalent bonds involving fluorine atoms are single bonds, although at least two examples of a higher order bond exist. Fluoride may act as a bridging ligand between two metals in some complex molecules. Molecules containing fluorine may also exhibit hydrogen bonding. Fluorine's chemistry includes inorganic compounds formed with hydrogen, metals, nonmetals, and even noble gases; as well as a diverse set of organic compounds. For many elements the highest known oxidation state can be achieved in a fluoride. For some elements this is achieved exclusively in a fluoride, for others exclusively in an oxide; and for still others the highest oxidation states of oxides and fluorides are always equal.

<span class="mw-page-title-main">Nitrogen difluoride</span> Chemical compound

Nitrogen difluoride, also known as difluoroamino, is a reactive radical molecule with formula NF2. This small molecule is in equilibrium with its dimer dinitrogen tetrafluoride.

Nitride fluorides containing nitride and fluoride ions with the formula NF4-. They can be electronically equivalent to a pair of oxide ions O24-. Nitride fluorides were discovered in 1996 by Lavalle et al. They heated diammonium technetium hexafluoride to 300 °C to yield TcNF. Another preparation is to heat a fluoride compound with a nitride compound in a solid state reaction. The fluorimido ion is F-N2- and is found in a rhenium compound.

Rhenium compounds are compounds formed by the transition metal rhenium (Re). Rhenium can form in many oxidation states, and compounds are known for every oxidation state from -3 to +7 except -2, although the oxidation states +7, +6, +4, and +2 are the most common. Rhenium is most available commercially as salts of perrhenate, including sodium and ammonium perrhenates. These are white, water-soluble compounds. Tetrathioperrhenate anion [ReS4] is possible.

Americium compounds are compounds containing the element americium (Am). These compounds can form in the +2, +3, and +4, although the +3 oxidation state is the most common. The +5, +6 and +7 oxidation states have also been reported.

Iodosyl pentafluoride is an inorganic compound of iodine, fluorine, and oxygen with the chemical formula IOF5.

References

  1. 1 2 3 4 J.G.Malm; H.Selig (1961). "The vapour-pressures and other properties of ReF6 and ReF7". Journal of Inorganic and Nuclear Chemistry. 20 (3): 189–197. doi:10.1016/0022-1902(61)80267-4.
  2. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN   978-0-08-037941-8.
  3. Vogt T.; Fitch A. N.; Cockcroft J. K. (1994). "Crystal and Molecular Structures of Rhenium Heptafluoride". Science. 263 (5151): 1265–7. Bibcode:1994Sci...263.1265V. doi:10.1126/science.263.5151.1265. PMID   17817431. S2CID   20013073.
  4. Jacob, E. Jean; Bartell, L.S.J. (1970). "Electron Diffraction Study of Rhenium Fluorides. II. Structure, Pseudorotation, and Anharmonic Coupling of Modes in ReF7" (PDF). The Journal of Chemical Physics. 53 (6): 2235. Bibcode:1970JChPh..53.2235J. doi:10.1063/1.1674318. hdl: 2027.42/70852 .
  5. 1 2 A. F. Holleman; Wiberg, Egon; Wiberg, Nils (2001). Inorganic Chemistry. Boston: Academic Press. ISBN   0-12-352651-5.
  6. Richard L. Johnson; Bernard Siegel (1969). "On the synthesis of ReF7 and the existence of ReF2 and ReF3". Journal of Inorganic and Nuclear Chemistry. 31 (8): 2391–2396. doi:10.1016/0022-1902(69)80569-5.
  7. Hwang, I; Seppelt, K. (2000). "The structures of ReF
    8
    and UF2−
    8
    ". Journal of Fluorine Chemistry. 102 (1–2): 69–72. doi:10.1016/S0022-1139(99)00248-1.