Nitrogen trifluoride

Last updated
Nitrogen trifluoride
Nitrogen-trifluoride-2D-dimensions.png
Nitrogen-trifluoride-3D-vdW.png
Names
IUPAC name
Nitrogen trifluoride
Other names
Nitrogen fluoride
Trifluoramine
Trifluorammonia
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.029.097 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 232-007-1
1551
PubChem CID
RTECS number
  • QX1925000
UNII
UN number 2451
  • InChI=1S/F3N/c1-4(2)3 Yes check.svgY
    Key: GVGCUCJTUSOZKP-UHFFFAOYSA-N Yes check.svgY
  • InChI=1/F3N/c1-4(2)3
    Key: GVGCUCJTUSOZKP-UHFFFAOYAA
  • FN(F)F
Properties
NF3
Molar mass 71.00 g/mol
Appearancecolorless gas
Odor moldy
Density 3.003 kg/m3 (1 atm, 15 °C)
1.885 g/cm3 (liquid at b.p.)
Melting point −207.15 °C (−340.87 °F; 66.00 K)
Boiling point −129.06 °C (−200.31 °F; 144.09 K)
0.021 g/100 mL
Vapor pressure 44.0 atm [1] (−38.5 °F or −39.2 °C or 234.0 K) [lower-alpha 1]
1.0004
Structure
trigonal pyramidal
0.234 D
Thermochemistry
53.26 J/(mol·K)
Std molar
entropy
(S298)
260.3 J/(mol·K)
−31.4 kcal/mol [2]
−109 kJ/mol [3]
−84.4 kJ/mol
Hazards
GHS labelling:
H270, H280, H332
P220, P244, P260, P304+P340, P315, P370+P376, P403
NFPA 704 (fire diamond)
NFPA 704.svgHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazard OX: Oxidizer. E.g. potassium perchlorate
1
0
0
OX
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
2000 ppm (mouse, 4  h)
9600 ppm (dog, 1 h)
7500 ppm (monkey, 1 h)
6700 ppm (rat, 1 h)
7500 ppm (mouse, 1 h) [4]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 10 ppm (29 mg/m3) [5]
REL (Recommended)
TWA 10 ppm (29 mg/m3) [5]
IDLH (Immediate danger)
1000 ppm [5]
Safety data sheet (SDS) AirLiquide
Related compounds
Other anions
nitrogen trichloride
nitrogen tribromide
nitrogen triiodide
ammonia
Other cations
phosphorus trifluoride
arsenic trifluoride
antimony trifluoride
bismuth trifluoride
Related binary fluoro-azanes
tetrafluorohydrazine
Related compounds
dinitrogen difluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

Nitrogen trifluoride is the inorganic compound with the formula (NF
3
). It is a colorless, non-flammable, non-toxic gas with a slightly musty odor. In contrast with ammonia, it is nonbasic. It finds increasing use within the manufacturing of flat-panel displays, photovoltaics, LEDs and other microelectronics. [6] NF
3
is a greenhouse gas, with a global warming potential (GWP) 17,200 times greater than that of CO
2
when compared over a 100-year period. [7] [8] [9]

Contents

Synthesis and reactivity

Nitrogen trifluoride can be prepared from the elements in the presence of an electric discharge. [10] In 1903, Otto Ruff prepared nitrogen trifluoride by the electrolysis of a molten mixture of ammonium fluoride and hydrogen fluoride. [11] It is far less reactive than the other nitrogen trihalides nitrogen trichloride, nitrogen tribromide, and nitrogen triiodide, all of which are explosive. Alone among the nitrogen trihalides it has a negative enthalpy of formation. It is prepared in modern times both by direct reaction of ammonia and fluorine and by a variation of Ruff's method. [6] It is supplied in pressurized cylinders.

NF
3
is slightly soluble in water without undergoing chemical reaction. It is nonbasic with a low dipole moment of 0.2340 D. By contrast, ammonia is basic and highly polar (1.47 D). [12] This contrast reflects the differing electronegativities of H vs F.

Similar to dioxygen, NF3 is a potent yet sluggish oxidizer. [6] It oxidizes hydrogen chloride to chlorine:[ citation needed ]

2 NF3 + 6 HCl → 6 HF + N2 + 3 Cl2

However, it only attacks (explosively) organic compounds at high temperatures. Consequently it is compatible under standard conditions with several plastics, as well as steel and Monel. [6]

Above 200-300 °C, NF3 reacts with metals, carbon, and other reagents to give tetrafluorohydrazine: [13]

2NF3 + Cu → N2F4 + CuF2

NF3 reacts with fluorine and antimony pentafluoride to give the tetrafluoroammonium salt: [6]

NF3 + F2 + SbF5 → NF+
4
SbF
6

NF3 and B2H6 react vigorously even at cryogenic temperatures to give nitrogen gas, boron trifluoride, and hydrofluoric acid. [14]

Applications

High-volume applications such as DRAM computer memory production, the manufacturing of flat panel displays and the large-scale production of thin-film solar cells use NF
3
. [15] [16]

Etching

Nitrogen trifluoride is primarily used to remove silicon and silicon-compounds during the manufacturing of semiconductor devices such as LCD displays, some thin-film solar cells, and other microelectronics. In these applications NF
3
is initially broken down within a plasma. The resulting fluorine radicals are the active agents that attack polysilicon, silicon nitride and silicon oxide. They can be used as well to remove tungsten silicide, tungsten, and certain other metals. In addition to serving as an etchant in device fabrication, NF
3
is also widely used to clean PECVD chambers.

NF
3
dissociates more readily within a low-pressure discharge in comparison to perfluorinated compounds (PFCs) and sulfur hexafluoride (SF
6
). The greater abundance of negatively-charged free radicals thus generated can yield higher silicon removal rates, and provide other process benefits such as less residual contamination and a lower net charge stress on the device being fabricated. As a somewhat more thoroughly consumed etching and cleaning agent, NF3 has also been promoted as an environmentally preferable substitute for SF
6
or PFCs such as hexafluoroethane. [17]

The utilization efficiency of the chemicals applied in plasma processes varies widely between equipment and applications. A sizeable fraction of the reactants are wasted into the exhaust stream and can ultimately be emitted into Earth's atmosphere. Modern abatement systems can substantially decrease atmospheric emissions. [18] NF
3
has not been subject to significant use restrictions. The annual reporting of NF
3
production, consumption, and waste emissions by large manufacturers has been required in many industrialized countries as a response to the observed atmospheric growth and the international Kyoto Protocol. [19]

Highly toxic fluorine gas (F2, diatomic fluorine) is a climate neutral replacement for nitrogen trifluoride in some manufacturing applications. It requires more stringent handling and safety precautions, especially to protect manufacturing personnel. [20]

Nitrogen trifluoride is also used in hydrogen fluoride and deuterium fluoride lasers, which are types of chemical lasers. There it is also preferred to fluorine gas due to its more convenient handling properties

Greenhouse gas

Growth in atmospheric concentration of NF3 since the 1990s is shown in right graph, along with a subset of similar man-made gases. Note the log scale. Halogenated gas concentrations 1978-present.png
Growth in atmospheric concentration of NF3 since the 1990s is shown in right graph, along with a subset of similar man-made gases. Note the log scale.

The GWP of NF
3
is second only to SF
6
in the group of Kyoto-recognised greenhouse gases, and NF
3
was included in that grouping with effect from 2013 and the commencement of the second commitment period of the Kyoto Protocol. It has an estimated atmospheric lifetime of 740 years, [7] although other work suggests a slightly shorter lifetime of 550 years (and a corresponding GWP of 16,800). [15]

Nitrogen trifluoride concentration at several latitudes since 2015. Nitrogen Trifluoride concentration.jpg
Nitrogen trifluoride concentration at several latitudes since 2015.
NF3 measured by the Advanced Global Atmospheric Gases Experiment (AGAGE) in the lower atmosphere (troposphere) at stations around the world. Abundances are given as pollution free monthly mean mole fractions in parts-per-trillion. NF3 mm.png
NF3 measured by the Advanced Global Atmospheric Gases Experiment (AGAGE) in the lower atmosphere (troposphere) at stations around the world. Abundances are given as pollution free monthly mean mole fractions in parts-per-trillion.

Since 1992, when less than 100 tons were produced, production grew to an estimated 4000 tons in 2007 and is projected to increase significantly. [15] World production of NF3 is expected to reach 8000 tons a year by 2010. By far the world's largest producer of NF
3
is the US industrial gas and chemical company Air Products & Chemicals. An estimated 2% of produced NF
3
is released into the atmosphere. [23] [24] Robson projected that the maximum atmospheric concentration is less than 0.16 parts per trillion (ppt) by volume, which will provide less than 0.001 Wm−2 of IR forcing. [25] The mean global tropospheric concentration of NF3 has risen from about 0.02 ppt (parts per trillion, dry air mole fraction) in 1980, to 0.86 ppt in 2011, with a rate of increase of 0.095 ppt yr−1, or about 11% per year, and an interhemispheric gradient that is consistent with emissions occurring overwhelmingly in the Northern Hemisphere, as expected. This rise rate in 2011 corresponds to about 1200 metric tons/y NF3 emissions globally, or about 10% of the NF3 global production estimates. This is a significantly higher percentage than has been estimated by industry, and thus strengthens the case for inventorying NF3 production and for regulating its emissions. [26] One study co-authored by industry representatives suggests that the contribution of the NF3 emissions to the overall greenhouse gas budget of thin-film Si-solar cell manufacturing is clear. [27]

The UNFCCC, within the context of the Kyoto Protocol, decided to include nitrogen trifluoride in the second Kyoto Protocol compliance period, which begins in 2012 and ends in either 2017 or 2020. Following suit, the WBCSD/WRI GHG Protocol is amending all of its standards (corporate, product and Scope 3) to also cover NF3. [28]

Safety

Skin contact with NF
3
is not hazardous, and it is a relatively minor irritant to mucous membranes and eyes. It is a pulmonary irritant with a toxicity considerably lower than nitrogen oxides, and overexposure via inhalation causes the conversion of hemoglobin in blood to methemoglobin, which can lead to the condition methemoglobinemia. [29] The National Institute for Occupational Safety and Health (NIOSH) specifies that the concentration that is immediately dangerous to life or health (IDLH value) is 1,000 ppm. [30]

See also

Notes

  1. This vapour pressure is the pressure at its critical temperature – below ordinary room temperature.

Related Research Articles

<span class="mw-page-title-main">Chlorofluorocarbon</span> Class of organic compounds

Chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) are fully or partly halogenated hydrocarbons that contain carbon (C), hydrogen (H), chlorine (Cl), and fluorine (F), produced as volatile derivatives of methane, ethane, and propane.

<span class="mw-page-title-main">Fluorocarbon</span> Class of chemical compounds

Fluorocarbons are chemical compounds with carbon-fluorine bonds. Compounds that contain many C-F bonds often have distinctive properties, e.g., enhanced stability, volatility, and hydrophobicity. Several fluorocarbons and their derivatives are commercial polymers, refrigerants, drugs, and anesthetics.

<span class="mw-page-title-main">Sulfur hexafluoride</span> Chemical compound and greenhouse gas

Sulfur hexafluoride or sulphur hexafluoride (British spelling) is an inorganic compound with the formula SF6. It is a colorless, odorless, non-flammable, and non-toxic gas. SF
6
has an octahedral geometry, consisting of six fluorine atoms attached to a central sulfur atom. It is a hypervalent molecule.

Chlorine trifluoride is an interhalogen compound with the formula ClF3. It is a colorless, poisonous, corrosive, and extremely reactive gas that condenses to a pale-greenish yellow liquid, the form in which it is most often sold. It is famous for its extreme oxidation properties. The compound is primarily of interest in plasmaless cleaning and etching operations in the semiconductor industry, in nuclear reactor fuel processing, historically as a component in rocket fuels, and various other industrial operations owing to its corrosive nature.

<span class="mw-page-title-main">Infrared window</span> Atmospheric window

The infrared atmospheric window refers to a region of the infrared spectrum where there is relatively little absorption of terrestrial thermal radiation by atmospheric gases. The window plays an important role in the atmospheric greenhouse effect by maintaining the balance between incoming solar radiation and outgoing IR to space. In the Earth's atmosphere this window is roughly the region between 8 and 14 μm although it can be narrowed or closed at times and places of high humidity because of the strong absorption in the water vapor continuum or because of blocking by clouds. It covers a substantial part of the spectrum from surface thermal emission which starts at roughly 5 μm. Principally it is a large gap in the absorption spectrum of water vapor. Carbon dioxide plays an important role in setting the boundary at the long wavelength end. Ozone partly blocks transmission in the middle of the window.

Boron trifluoride is the inorganic compound with the formula BF3. This pungent, colourless, and toxic gas forms white fumes in moist air. It is a useful Lewis acid and a versatile building block for other boron compounds.

Trichlorofluoromethane, also called freon-11, CFC-11, or R-11, is a chlorofluorocarbon (CFC). It is a colorless, faintly ethereal, and sweetish-smelling liquid that boils around room temperature. CFC-11 is a Class 1 ozone-depleting substance which damages Earth's protective stratospheric ozone layer. Also R-11 is not flammable at ambient temperature and pressure but it can become very combustible if heated and ignited by a strong ignition source.

<span class="mw-page-title-main">Carbon tetrafluoride</span> Chemical compound

Tetrafluoromethane, also known as carbon tetrafluoride or R-14, is the simplest perfluorocarbon (CF4). As its IUPAC name indicates, tetrafluoromethane is the perfluorinated counterpart to the hydrocarbon methane. It can also be classified as a haloalkane or halomethane. Tetrafluoromethane is a useful refrigerant but also a potent greenhouse gas. It has a very high bond strength due to the nature of the carbon–fluorine bond.

Fluoroform, or trifluoromethane, is the chemical compound with the formula CHF3. It is a hydrofluorocarbon as well as being a part of the haloforms, a class of compounds with the formula CHX3 with C3v symmetry. Fluoroform is used in diverse applications in organic synthesis. It is not an ozone depleter but is a greenhouse gas.

Chlorotrifluoromethane, R-13, CFC-13, or Freon 13, is a non-flammable, non-corrosive, nontoxic chlorofluorocarbon (CFC) and also a mixed halomethane. It is a man-made substance used primarily as a refrigerant. When released into the environment, CFC-13 has a high ozone depletion potential, and long atmospheric lifetime. Only a few other greenhouse gases surpass CFC-13 in global warming potential (GWP). The IPCC AR5 reported that CFC-13's atmospheric lifetime was 640 years.

Organofluorine chemistry describes the chemistry of organofluorine compounds, organic compounds that contain a carbon–fluorine bond. Organofluorine compounds find diverse applications ranging from oil and water repellents to pharmaceuticals, refrigerants, and reagents in catalysis. In addition to these applications, some organofluorine compounds are pollutants because of their contributions to ozone depletion, global warming, bioaccumulation, and toxicity. The area of organofluorine chemistry often requires special techniques associated with the handling of fluorinating agents.

Nitrogen fluorides are compounds of chemical elements nitrogen and fluorine. Many different nitrogen fluorides are known:

<span class="mw-page-title-main">Dichlorofluoromethane</span> Chemical compound

Dichlorofluoromethane or Freon 21 or R 21 is a halomethane or hydrochlorofluorocarbon with the formula CHCl2F. It is a colorless and odorless gas. It is produced by fluorination of chloroform using a catalyst such as antimony trifluoride:

Arsenic pentafluoride is a chemical compound of arsenic and fluorine. It is a toxic, colorless gas. The oxidation state of arsenic is +5.

<span class="mw-page-title-main">Tetrafluoroammonium</span> Chemical compound

The tetrafluoroammonium cation is a positively charged polyatomic ion with chemical formula NF+
4
. It is equivalent to the ammonium ion where the hydrogen atoms surrounding the central nitrogen atom have been replaced by fluorine. Tetrafluoroammonium ion is isoelectronic with tetrafluoromethane CF
4
, trifluoramine oxide ONF
3
, tetrafluoroborate BF
4
anion and the tetrafluoroberyllate BeF2−
4
anion.

Nitrogen pentafluoride is a theoretical compound of nitrogen and fluorine with the chemical formula NF5. It is hypothesized to exist based on the existence of the pentafluorides of the atoms below nitrogen in the periodic table, such as phosphorus pentafluoride. Theoretical models of the nitrogen pentafluoride molecule are either a trigonal bipyramidal covalently bound molecule with symmetry group D3h, or [NF4]+F, which would be an ionic solid.

Fluorinated gases (F-gases) are a group of gases containing fluorine. They are divided into several types, the main of those are hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6). They are used in refrigeration, air conditioning, heat pumps, fire suppression, electronics, aerospace, magnesium industry, foam and high voltage switchgear. As they are greenhouse gases with a strong global warming potential, their use is regulated.

Fluorine forms a great variety of chemical compounds, within which it always adopts an oxidation state of −1. With other atoms, fluorine forms either polar covalent bonds or ionic bonds. Most frequently, covalent bonds involving fluorine atoms are single bonds, although at least two examples of a higher order bond exist. Fluoride may act as a bridging ligand between two metals in some complex molecules. Molecules containing fluorine may also exhibit hydrogen bonding. Fluorine's chemistry includes inorganic compounds formed with hydrogen, metals, nonmetals, and even noble gases; as well as a diverse set of organic compounds. For many elements the highest known oxidation state can be achieved in a fluoride. For some elements this is achieved exclusively in a fluoride, for others exclusively in an oxide; and for still others the highest oxidation states of oxides and fluorides are always equal.

Thullium(III) fluoride is an inorganic compound with the chemical formula TmF3.

References

  1. Air Products; Physical Properties for Nitrogen Trifluoride
  2. Sinke, G. C. (1967). "The enthalpy of dissociation of nitrogen trifluoride". J. Phys. Chem. 71 (2): 359–360. doi:10.1021/j100861a022.
  3. Inorganic Chemistry , p. 462, at Google Books
  4. "Nitrogen trifluoride". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  5. 1 2 3 NIOSH Pocket Guide to Chemical Hazards. "#0455". National Institute for Occupational Safety and Health (NIOSH).
  6. 1 2 3 4 5 Philip B. Henderson, Andrew J. Woytek "Fluorine Compounds, Inorganic, Nitrogen" in Kirk‑Othmer Encyclopedia of Chemical Technology, 1994, John Wiley & Sons, NY. doi : 10.1002/0471238961.1409201808051404.a01 Article Online Posting Date: December 4, 2000
  7. 1 2 "Climate Change 2007: The Physical Sciences Basis" (PDF). IPCC . Retrieved 2008-07-03.{{cite journal}}: Cite journal requires |journal= (help)
  8. Robson, J. I.; Gohar, L. K.; Hurley, M. D.; Shine, K. P.; Wallington, T. (2006). "Revised IR spectrum, radiative efficiency and global warming potential of nitrogen trifluoride". Geophys. Res. Lett. 33 (10): L10817. Bibcode:2006GeoRL..3310817R. doi: 10.1029/2006GL026210 .
  9. Richard Morgan (2008-09-01). "Beyond Carbon: Scientists Worry About Nitrogen's Effects". The New York Times . Archived from the original on 2018-01-23. Retrieved 2008-09-07.
  10. Lidin, P. A.; Molochko, V. A.; Andreeva, L. L. (1995). Химические свойства неорганических веществ (in Russian). pp. 442–455. ISBN   978-1-56700-041-2.
  11. Otto Ruff, Joseph Fischer, Fritz Luft (1928). "Das Stickstoff-3-fluorid". Zeitschrift für Anorganische und Allgemeine Chemie. 172 (1): 417–425. doi:10.1002/zaac.19281720132.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  12. Klapötke, Thomas M. (2006). "Nitrogen–fluorine compounds". Journal of Fluorine Chemistry. 127 (6): 679–687. doi:10.1016/j.jfluchem.2006.03.001.
  13. Ruff, John K. (1967). "Derivatives of Nitrogen Fluorides". Chemical Reviews. 67 (6): 665–680. doi:10.1021/cr60250a004.
  14. Parry, Robert W., and Thomas C. Bissot. "The Preparation and Properties of Phosphorus Trifluoride-Borane and Phosphorus Trifluoride-Borane-d31." Journal of the American Chemical Society 78, no. 8 (1956): 1524-1527.
  15. 1 2 3 Prather, M.J.; Hsu, J. (2008). "NF
    3
    , the greenhouse gas missing from Kyoto"
    . Geophys. Res. Lett. 35 (12): L12810. Bibcode:2008GeoRL..3512810P. doi: 10.1029/2008GL034542 .
  16. Tsai, W.-T. (2008). "Environmental and health risk analysis of nitrogen trifluoride (NF
    3
    ), a toxic and potent greenhouse gas". J. Hazard. Mater. 159 (2–3): 257–63. doi:10.1016/j.jhazmat.2008.02.023. PMID   18378075.
  17. H. Reichardt, A. Frenzel and K. Schober (2001). "Environmentally friendly wafer production: NF
    3
    remote microwave plasma for chamber cleaning". Microelectronic Engineering. 56 (1–2): 73–76. doi:10.1016/S0167-9317(00)00505-0.
  18. "F-GHG Emissions Reduction Efforts: Flat Panel Display Supplier Profiles" (PDF). U.S. EPA. 2016-09-30.
  19. "Fluorinated Greenhouse Gas Emissions and Supplies Reported to the Greenhouse Gas Reporting Program (GHGRP)". U.S. Environmental Protection Agency. 27 September 2015. Retrieved 2021-03-05.
  20. J. Oshinowo; A. Riva; M Pittroff; T. Schwarze; R. Wieland (2009). "Etch performance of Ar/N2/F2 for CVD/ALD chamber clean". Solid State Technology. 52 (2): 20–24.
  21. "Climate Change Indicators: Atmospheric Concentrations of Greenhouse Gases - Figure 4". U.S. Environmental Protection Agency. 27 June 2016. Retrieved 2021-03-05.
  22. "Atmospheric Flask NF3". National Oceanic and Atmospheric Administration. 2020-06-30.
  23. M. Roosevelt (2008-07-08). "A climate threat from flat TVs, microchips". Los Angeles Times.
  24. Hoag, Hannah (2008-07-10). "The Missing Greenhouse Gas". Nature Reports Climate Change. Vol. 1, no. 808. Nature News. pp. 99–100. doi:10.1038/climate.2008.72.
  25. Robson, Jon. "Nitrogen trifluoride (NF3)". Royal Meteorological Society. Archived from the original on May 16, 2008. Retrieved 2008-10-27.{{cite journal}}: Cite journal requires |journal= (help)
  26. Arnold, Tim; Harth, C. M.; Mühle, J.; Manning, A. J.; Salameh, P. K.; Kim, J.; Ivy, D. J.; Steele, L. P.; Petrenko, V. V.; Severinghaus, J. P.; Baggenstos, D.; Weiss, R. F. (2013-02-05). "Nitrogen trifluoride global emissions estimated from updated atmospheric measurements". Proc. Natl. Acad. Sci. USA . 110 (6): 2029–2034. Bibcode:2013PNAS..110.2029A. doi: 10.1073/pnas.1212346110 . PMC   3568375 . PMID   23341630.
  27. V. Fthenakis; D. O. Clark; M. Moalem; M. P. Chandler; R. G. Ridgeway; F. E. Hulbert; D. B. Cooper; P. J. Maroulis (2010-10-25). "Life-Cycle Nitrogen Trifluoride Emissions from Photovoltaics". Environ. Sci. Technol. 44 (22). American Chemical Society: 8750–7. Bibcode:2010EnST...44.8750F. doi:10.1021/es100401y. PMID   21067246.
  28. Rivers, Ali (2012-08-15). "Nitrogen trifluoride: the new mandatory Kyoto Protocol greenhouse gas". Ecometrica.com. www.ecometrica.com.
  29. Malik, Yogender (2008-07-03). "Nitrogen trifluoride – Cleaning up in electronic applications". Gasworld. Archived from the original on 2008-08-04. Retrieved 2008-07-15.
  30. "Immediately Dangerous to Life or Health Concentrations (IDLH): Nitrogen Trifluoride". National Institute for Occupational Safety and Health. 2 November 2018.