Iron(I) hydride

Last updated
Iron(I) hydride
Hydridoiron(3*)-2D.png
Hydridoiron(3*)-3D-vdW.png
Hydridoiron(3*)-3D-balls.png
Names
Systematic IUPAC name
Hydridoiron(3•)
Identifiers
3D model (JSmol)
  • InChI=1S/Fe.H
    Key: VWDRTGQNZKYVEZ-UHFFFAOYSA-N
  • [Fe][H]
Properties
FeH3•
Molar mass 56.853 g mol−1
Thermochemistry
450.6 kJ mol−1[ citation needed ]
Related compounds
Related compounds
 Iron hydrides, FeH2
CrH, CaH, MgH
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Iron(I) hydride, systematically named iron hydride and poly(hydridoiron) is a solid inorganic compound with the chemical formula (FeH)
n (also written ([FeH])
n or FeH). It is both thermodynamically and kinetically unstable toward decomposition at ambient temperature, and as such, little is known about its bulk properties.

Contents

Iron(I) hydride is the simplest polymeric iron hydride. Due to its instability, it has no practical industrial uses. However, in metallurgical chemistry, iron(I) hydride is fundamental to certain forms of iron-hydrogen alloys.

Nomenclature

The systematic name iron hydride, a valid IUPAC name, is constructed according to the compositional nomenclature. However, as the name is compositional in nature, it does not distinguish between compounds of the same stoichiometry, such as molecular species, which exhibit distinct chemical properties. The systematic names poly(hydridoiron) and poly[ferrane(1)], also valid IUPAC names, are constructed according to the additive and electron-deficient substitutive nomenclatures, respectively. They do distinguish the titular compound from the others.

Hydridoiron

Hydridoiron, also systematically named ferrane(1), is a related compound with the chemical formula FeH (also written [FeH]). It is also unstable at ambient temperature with the additional propensity to autopolymerize, and so cannot be concentrated.

Hydridoiron is the simplest molecular iron hydride. In addition, it may be considered to be the iron(I) hydride monomer. It has been detected in isolation only in extreme environments, like trapped in frozen noble gases, in the atmosphere of cool stars, or as a gas at temperatures above the boiling point of iron. It is assumed to have three dangling valence bonds, and is therefore a free radical; its formula may be written FeH3• to emphasize this fact.

At very low temperatures (below 10 K), FeH may form a complex with molecular hydrogen FeH·H2. [1]

Hydridoiron was first detected in the laboratory by B. Kleman and L. Åkerlind in the 1950s.[ citation needed ]

Properties

Radicality and acidity

A single electron of another atomic or molecular species can join with the iron centre in hydridoiron by substitution:

[FeH] + RR → [FeHR] + ·R

Because of this capture of a single electron, hydridoiron has radical character. Hydridoiron is a strong radical.

An electron pair of a Lewis base can join with the iron centre by adduction:

[FeH] + :L → [FeHL]

Because of this capture of an adducted electron pair, hydridoiron has Lewis-acidic character. It should be expected that iron(I) hydride has significantly diminished radical properties, but has similar acid properties, however reaction rates and equilibrium constants are different.

Structure

Ball and stick model of iron hydride Iron-hydride-ball-and-stick.png
Ball and stick model of iron hydride

In iron(I) hydride, the atoms form a network, individual atoms being interconnected by covalent bonds. Since it is a polymeric solid, a monocrystalline sample is not expected to undergo state transitions, such as melting and dissolution, as this would require the rearrangement of molecular bonds and consequently, change its chemical identity. Colloidal crystalline samples, wherein intermolecular forces are relevant, are expected to undergo state transitions.

Iron(I) hydride adopts a double hexagonal close-packed crystalline structure with the P63/mmc space group, also referred to as epsilon-prime iron hydride in the context of the iron-hydrogen system. It is predicted to exhibit polymorphism, transitioning at some temperature below −173 °C (−279 °F) to a face-centred crystalline structure with the Fm3m space group.

Electromagnetic properties

FeH is predicted to have a quartet and a sextet ground states.

The FeH molecule has at least four low energy electronic states caused by the non bonding electron taking up positions in different orbitals: X4Δ, a6Δ b6Π, [2] and c6Σ+. [3] Higher energy states are termed B4Σ−, C4Φ, D4Σ+, E4Π, and F4Δ. [4] Even higher levels are labelled G4Π and H4Δ from the quartet system, and d6Σ−, e6Π, f6Δ, and g6Φ. [2] In the quartet states the inner quantum number J takes on values 1/2, 3/2, 5/2, and 7/2.

band
name		wavelength
nm		wavenumber
cm−1		transition
Wing-Ford989.610100F4Δ—X4Δ
blue49020408g6Φ—a6Δ
green53018867e6Π—a6Δ

FeH has an important absorption band (called the Wing-Ford band) in the near infrared with a band edge at 989.652 nm and a maximum absorption at 991 nm. [5] It also has lines in the blue at 470 to 502.5 nm and in green from 520 to 540 nm. [6]

The small isotope shift of the deuterated FeD compared to FeH at this wavelength shows that the band is due to a (0,0) transition from the ground state, namely F4Δ—X4Δ. [7]

Various other bands exists in each part of the spectrum due to different vibrational transitions. [8] The (1,0) band, also due to F4Δ—X4Δ transitions, is around 869.0 nm and the (2,0) band around 781.8 nm. [4]

Within each band there are a great number of lines. These are due to transition between different rotational states. The lines are grouped into subbands 4Δ7/2—4Δ7/2 (strongest) and 4Δ5/2—4Δ5/2, 4Δ3/2—4Δ3/2 and 4Δ1/2—4Δ1/2. The numbers like 7/2 are values for Ω the spin component. [8] Each of these has two branches P and R, and some have a Q branch. Within each there is what is called Λ splitting that results in a lower energy lines (designated "a") and higher energy lines (called "b"). For each of these there is a series of spectral lines dependent on J, the rotational quantum number, starting from 3.5 and going up in steps of 1. How high J gets depends on the temperature. In addition there are 12 satellite branches 4Δ7/2—4Δ5/2, 4Δ5/2—4Δ3/2, 4Δ3/2—4Δ1/2, 4Δ5/2—4Δ7/2, 4Δ3/2—4Δ5/2 and 4Δ1/2—4Δ3/2 with P and R branches. [5]

Some lines are magnetically sensitive, such as 994.813 and 995.825 nm. They are broadened by the Zeeman effect yet others in the same band are insensitive to magnetic fields like 994.911 and 995.677 nm. [9] There are 222 lines in the (0-0) band spectrum. [10]

Occurrence in outer space

Iron hydride is one of the few molecules found in the Sun. [11] Lines for FeH in the blue-green part of the solar spectrum were reported in 1972, including many absorption lines in 1972. [6] Also sunspot umbras show up the Wing-Ford band prominently. [8]

Bands for FeH (and other hydrides of transition metals and alkaline earths) show up prominently in the emission spectra for M dwarfs and L dwarfs, the hottest kind of brown dwarf. For cooler T dwarfs, the bands for FeH do not appear, [12] probably due to liquid iron clouds blocking the view of the atmosphere, and removing it from the gas phase of the atmosphere. For even cooler brown dwarfs (<1350 K), signals for FeH reappear, which is explained by the clouds having gaps. [13]

The explanation for the kind of stars that the FeH Wing-Ford band appears in, is that the temperature is around 3000 K and pressure is sufficient to have a large number of FeH molecules formed. Once the temperature reaches 4000 K as in a K dwarf the line is weaker due to more of the molecules being dissociated. In M giant red giants the gas pressure is too low for FeH to form. [7]

Elliptical and lenticular galaxies also have an observable Wing-Ford band, due to a large amount of their light coming from M dwarfs. [8]

In 2021, traces of FeH was confirmed to be present in the atmosphere of hot Jupiter WASP-79b. [14]

Production

Kleman and Åkerlind first produced FeH in the laboratory by heating iron to 2600 K in a King-type furnace under a thin hydrogen atmosphere.

Molecular FeH can also be obtained (together with FeH2 and other species) by vaporizing iron in an argon-hydrogen atmosphere and freezing the gas on a solid surface at about 10 K (-263 °C). The compound can be detected by infrared spectroscopy, and about half of it disappears when the sample is briefly warmed to 30 K. [15] A variant technique uses pure hydrogen atmosphere condensed at 4 K. [1]

This procedure also generates molecules that were thought to be FeH3 (ferric hydride) but were later assigned to an association of FeH and molecular hydrogen H2. [16]

Molecular FeH has been produced by the decay of 57Co embedded in solid hydrogen. Mössbauer spectroscopy revealed an isomer shift of 0.59 mm/s compared with metallic iron and quadrupole splitting of 2.4 mm/s. [17] FeH can also be produced by the interaction of Iron pentacarbonyl vapour and atomic hydrogen in a microwave discharge. [18]

See also

Related Research Articles

<span class="mw-page-title-main">Stellar classification</span> Classification of stars based on spectral properties

In astronomy, stellar classification is the classification of stars based on their spectral characteristics. Electromagnetic radiation from the star is analyzed by splitting it with a prism or diffraction grating into a spectrum exhibiting the rainbow of colors interspersed with spectral lines. Each line indicates a particular chemical element or molecule, with the line strength indicating the abundance of that element. The strengths of the different spectral lines vary mainly due to the temperature of the photosphere, although in some cases there are true abundance differences. The spectral class of a star is a short code primarily summarizing the ionization state, giving an objective measure of the photosphere's temperature.

Rotational–vibrational spectroscopy is a branch of molecular spectroscopy that is concerned with infrared and Raman spectra of molecules in the gas phase. Transitions involving changes in both vibrational and rotational states can be abbreviated as rovibrational transitions. When such transitions emit or absorb photons, the frequency is proportional to the difference in energy levels and can be detected by certain kinds of spectroscopy. Since changes in rotational energy levels are typically much smaller than changes in vibrational energy levels, changes in rotational state are said to give fine structure to the vibrational spectrum. For a given vibrational transition, the same theoretical treatment as for pure rotational spectroscopy gives the rotational quantum numbers, energy levels, and selection rules. In linear and spherical top molecules, rotational lines are found as simple progressions at both higher and lower frequencies relative to the pure vibration frequency. In symmetric top molecules the transitions are classified as parallel when the dipole moment change is parallel to the principal axis of rotation, and perpendicular when the change is perpendicular to that axis. The ro-vibrational spectrum of the asymmetric rotor water is important because of the presence of water vapor in the atmosphere.

<span class="mw-page-title-main">Hydroxyl radical</span> Neutral form of hydroxide, OH•

The hydroxyl radical, •HO, is the neutral form of the hydroxide ion (HO–). Hydroxyl radicals are highly reactive and consequently short-lived; however, they form an important part of radical chemistry. Most notably hydroxyl radicals are produced from the decomposition of hydroperoxides (ROOH) or, in atmospheric chemistry, by the reaction of excited atomic oxygen with water. It is also an important radical formed in radiation chemistry, since it leads to the formation of hydrogen peroxide and oxygen, which can enhance corrosion and stress corrosion cracking in coolant systems subjected to radioactive environments. Hydroxyl radicals are also produced during UV-light dissociation of H2O2 (suggested in 1879) and likely in Fenton chemistry, where trace amounts of reduced transition metals catalyze peroxide-mediated oxidations of organic compounds.

<span class="mw-page-title-main">Trihydrogen cation</span> Polyatomic ion (H₃, charge +1)

The trihydrogen cation or protonated molecular hydrogen is a cation with formula H+3, consisting of three hydrogen nuclei (protons) sharing two electrons.

In chemistry and molecular physics, fluxionalmolecules are molecules that undergo dynamics such that some or all of their atoms interchange between symmetry-equivalent positions. Because virtually all molecules are fluxional in some respects, e.g. bond rotations in most organic compounds, the term fluxional depends on the context and the method used to assess the dynamics. Often, a molecule is considered fluxional if its spectroscopic signature exhibits line-broadening due to chemical exchange. In some cases, where the rates are slow, fluxionality is not detected spectroscopically, but by isotopic labeling and other methods.

<span class="mw-page-title-main">Magnesium hydride</span> Chemical compound

Magnesium hydride is the chemical compound with the molecular formula MgH2. It contains 7.66% by weight of hydrogen and has been studied as a potential hydrogen storage medium.

Binary compounds of hydrogen are binary chemical compounds containing just hydrogen and one other chemical element. By convention all binary hydrogen compounds are called hydrides even when the hydrogen atom in it is not an anion. These hydrogen compounds can be grouped into several types.

Cadmium hydride is an inorganic compound with the chemical formula (CdH
2)
n. It is a solid, known only as a thermally unstable, insoluble white powder.

Titanium(IV) hydride is an inorganic compound with the empirical chemical formula TiH
4. It has not yet been obtained in bulk, hence its bulk properties remain unknown. However, molecular titanium(IV) hydride has been isolated in solid gas matrices. The molecular form is a colourless gas, and very unstable toward thermal decomposition. As such the compound is not well characterised, although many of its properties have been calculated via computational chemistry.

<span class="mw-page-title-main">Iron hydride</span> Index of articles associated with the same name

An iron hydride is a chemical system which contains iron and hydrogen in some associated form.

<span class="mw-page-title-main">Chromium(I) hydride</span> Chemical compound

Chromium(I) hydride, systematically named chromium hydride, is an inorganic compound with the chemical formula (CrH)
n. It occurs naturally in some kinds of stars where it has been detected by its spectrum. However, molecular chromium(I) hydride with the formula CrH has been isolated in solid gas matrices. The molecular hydride is very reactive. As such the compound is not well characterised, although many of its properties have been calculated via computational chemistry.

Iron(II) hydride, systematically named iron dihydride and poly(dihydridoiron) is solid inorganic compound with the chemical formula (FeH
2)
n (also written ([FeH
2])n or FeH
2). ). It is kinetically unstable at ambient temperature, and as such, little is known about its bulk properties. However, it is known as a black, amorphous powder, which was synthesised for the first time in 2014.

In spectroscopy, collision-induced absorption and emission refers to spectral features generated by inelastic collisions of molecules in a gas. Such inelastic collisions may induce quantum transitions in the molecules, or the molecules may form transient supramolecular complexes with spectral features different from the underlying molecules. Collision-induced absorption and emission is particularly important in dense gases, such as hydrogen and helium clouds found in astronomical systems.

Stellar molecules are molecules that exist or form in stars. Such formations can take place when the temperature is low enough for molecules to form – typically around 6,000 K or cooler. Otherwise the stellar matter is restricted to atoms and ions in the forms of gas or – at very high temperatures – plasma.

<span class="mw-page-title-main">Calcium monohydride</span> Chemical compound

Calcium monohydride is a molecule composed of calcium and hydrogen with formula CaH. It can be found in stars as a gas formed when calcium atoms are present with hydrogen atoms.

<span class="mw-page-title-main">Magnesium monohydride</span> Chemical compound

Magnesium monohydride is a molecular gas with formula MgH that exists at high temperatures, such as the atmospheres of the Sun and stars. It was originally known as magnesium hydride, although that name is now more commonly used when referring to the similar chemical magnesium dihydride.

Neon compounds are chemical compounds containing the element neon (Ne) with other molecules or elements from the periodic table. Compounds of the noble gas neon were believed not to exist, but there are now known to be molecular ions containing neon, as well as temporary excited neon-containing molecules called excimers. Several neutral neon molecules have also been predicted to be stable, but are yet to be discovered in nature. Neon has been shown to crystallize with other substances and form clathrates or Van der Waals solids.

Argon compounds, the chemical compounds that contain the element argon, are rarely encountered due to the inertness of the argon atom. However, compounds of argon have been detected in inert gas matrix isolation, cold gases, and plasmas, and molecular ions containing argon have been made and also detected in space. One solid interstitial compound of argon, Ar1C60 is stable at room temperature. Ar1C60 was discovered by the CSIRO.

<span class="mw-page-title-main">Argonium</span> Chemical compound

Argonium (also called the argon hydride cation, the hydridoargon(1+) ion, or protonated argon; chemical formula ArH+) is a cation combining a proton and an argon atom. It can be made in an electric discharge, and was the first noble gas molecular ion to be found in interstellar space.

<span class="mw-page-title-main">Phosphorus monoxide</span> Chemical compound

Phosphorus monoxide is an unstable radical inorganic compound with molecular formula PO.

References

  1. 1 2 Wang, Xuefeng; Andrews, Lester (2009). "Infrared Spectra and Theoretical Calculations for Fe, Ru, and Os Metal Hydrides and Dihydrogen Complexes". The Journal of Physical Chemistry A. 113 (3): 551–563. Bibcode:2009JPCA..113..551W. doi:10.1021/jp806845h. PMID   19099441.
  2. 1 2 Hullah, Daniel F.; Burrow, Richard F.; Brown, John M. (September 1999). "Low-lying energy levels of the FeH molecule". Molecular Physics. 97 (1–2): 93–103. Bibcode:1999MolPh..97...93H. doi:10.1080/00268979909482812.
  3. ↑ Goodridge, Damian M.; Hullah, Daniel F.; Brown, John M. (8 January 1998). "Rotational analysis and assignment of the 630 nm band system of FeH to the e 6Π–c 6Σ1 transition". Journal of Chemical Physics. 108 (2): 428–435. Bibcode:1998JChPh.108..428G. doi:10.1063/1.475404.
  4. 1 2 Ram, R. S.; Bernath, P. F.; Davis, S. P. (10 May 1996). "Fourier Transform Emission Spectroscopy of the g4Δ–a4Δ System of FeF" (PDF). Journal of Molecular Spectroscopy. 179 (2): 297. Bibcode:1996JMoSp.179..282R. doi:10.1006/jmsp.1996.0207. Archived from the original (PDF) on 10 March 2005.
  5. 1 2 Phillips, J. G.; Davis, S. P.; Lindgren, B.; Balfour, W. J. (December 1987). "The near-infrared spectrum of the FeH molecule". Astrophysical Journal Supplement Series. 65: 721–778. Bibcode:1987ApJS...65..721P. doi:10.1086/191241. ISSN   0067-0049.
  6. 1 2 Carroll, P. K.; McCormack (1 October 1972). "The Spectrum of FeH: Laboratory and Solar Identification". Astrophysical Journal Letters. 177: L33 –L36. Bibcode:1972ApJ...177L..33C. doi:10.1086/181047.
  7. 1 2 Nordh, H. L.; Lindgren, B.; Wing, R. F. (April 1977). "A proposed identification of FeH in the spectra of M dwarfs and S stars". Astronomy and Astrophysics. 56 (1–2): 1–6. Bibcode:1977A&A....56....1N.
  8. 1 2 3 4 Schiavon, Ricardo P.; Barbuy, B.; Singh, Patan D. (20 July 1997). "The FeH Wing-Ford Band in Spectra of M Stars". The Astrophysical Journal. 484 (1). The American Astronomical Society: 499–510. arXiv: astro-ph/9701186 . Bibcode:1997ApJ...484..499S. doi:10.1086/304332. S2CID   118896684.
  9. ↑ Reiners, Ansgar; Schmitt, Jürgen H. M. M.; Liefke, C. (2007). "Rapid magnetic flux variability on the flare star CN Leonis" (PDF). Astronomy and Astrophysics. 466 (2): L13 –L16. arXiv: astro-ph/0703172 . Bibcode:2007A&A...466L..13R. doi:10.1051/0004-6361:20077095. S2CID   17926213.
  10. ↑ Mulchaey, John S. (February 1989). "The Rotational Temperature of the FeH Molecule in a Sunspot". Publications of the Astronomical Society of the Pacific. 101 (636). The University of Chicago Press: 211–214. Bibcode:1989PASP..101..211M. doi: 10.1086/132424 . JSTOR   40679297.
  11. ↑ Sinha, K. (1991). "Molecules in the sun". Proceedings of the Astronomical Society of Australia. 9 (1). Astronomical Society of Australia: 32. Bibcode:1991PASA....9...32S. doi:10.1017/S1323358000024814. S2CID   118585000. about 11 different molecules
  12. ↑ Cowen, Ron (4 July 1998). "So cool, and some are still stars". Science News.
  13. ↑ Burgasser, Adam J.; Marley, Mark S.; Ackerman, Andrew S.; Saumon, Didier; Lodders, Katharina; Dahn, Conard C.; Harris, Hugh C.; Kirkpatrick, J. Davy (1 June 2002). "Evidence of cloud disruption in the L/T dwarf transition". The Astrophysical Journal . 571 (2): L151 –L154. arXiv: astro-ph/0205051 . Bibcode:2002ApJ...571L.151B. doi:10.1086/341343. S2CID   17929123.
  14. ↑ Foote, Trevor O.; Lewis, Nikole K.; Kilpatrick, Brian M.; Goyal, Jayesh M.; Bruno, Giovanni; Wakeford, Hannah R.; Robbins-Blanch, Nina; Kataria, Tiffany; MacDonald, Ryan J.; López-Morales, Mercedes; Sing, David K.; Mikal-Evans, Thomas; Bourrier, Vincent; Henry, Gregory; Buchhave, Lars A. (2022), "The Emission Spectrum of the Hot Jupiter WASP-79b from HST/WFC3", The Astronomical Journal, 163 (1): 7, arXiv: 2107.14334 , Bibcode:2022AJ....163....7F, doi: 10.3847/1538-3881/ac2f4a , S2CID   236635028
  15. ↑ Chertihin, George V.; Andrews, Lester (1995). "Infrared spectra of FeH, FeH2, and FeH3 in solid argon". Journal of Physical Chemistry. 99 (32): 12131–12134. doi:10.1021/j100032a013.
  16. ↑ Andrews, Lester (30 January 2004). "Matrix infrared spectra and density functional calculations of transition metal hydrides and dihydrogen complexes". Chemical Society Reviews. 33 (2): 123–132. doi:10.1039/B210547K. PMID   14767507.
  17. ↑ Pasternak, M.; Van Der Heyden, M.; Langouche, G. (February 1984). "The characterization of FeH molecules by Mössbauer spectroscopy". Chemical Physics Letters. 104 (4): 398–400. Bibcode:1984CPL...104..398P. doi:10.1016/0009-2614(84)80087-1.
  18. ↑ Brown, John M.; Körsgen, Helga; Beaton, Stuart P.; Evenson, Kenneth M. (2006). "The rotational and fine-structure spectrum of FeH, studied by far-infrared laser magnetic resonance". The Journal of Chemical Physics. 124 (23). American Institute of Physics: 234309. Bibcode:2006JChPh.124w4309B. doi:10.1063/1.2198843. PMID   16821920. S2CID   31889615.

Extra reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.