Feed conversion ratio

Last updated

In animal husbandry, feed conversion ratio (FCR) or feed conversion rate is a ratio or rate measuring of the efficiency with which the bodies of livestock convert animal feed into the desired output. For dairy cows, for example, the output is milk, whereas in animals raised for meat (such as beef cows, [1] pigs, chickens, and fish) the output is the flesh, that is, the body mass gained by the animal, represented either in the final mass of the animal or the mass of the dressed output. FCR is the mass of the input divided by the output (thus mass of feed per mass of milk or meat). In some sectors, feed efficiency, which is the output divided by the input (i.e. the inverse of FCR), is used. These concepts are also closely related to efficiency of conversion of ingested foods (ECI).

Contents

Background

Feed conversion ratio (FCR) is the ratio of inputs to outputs; it is the inverse of "feed efficiency" which is the ratio of outputs to inputs. [2] FCR is widely used in hog and poultry production, while FE is used more commonly with cattle. [2] Being a ratio the FCR is dimensionless, that is, it is not affected by the units of measurement used to determine the FCR. [3]

FCR a function of the animal's genetics [4] and age, [5] the quality and ingredients of the feed, [5] and the conditions in which the animal is kept, [1] [6] and storage and use of the feed by the farmworkers. [7]

As a rule of thumb, the daily FCR is low for young animals (when relative growth is large) and increases for older animals (when relative growth tends to level out). However FCR is a poor basis to use for selecting animals to improve genetics, as that results in larger animals that cost more to feed; instead residual feed intake (RFI) is used which is independent of size. [8] RFI uses for output the difference between actual intake and predicted intake based on an animal's body weight, weight gain, and composition. [8] [9]

The outputs portion may be calculated based on weight gained, on the whole animal at sale, or on the dressed product; with milk it may be normalized for fat and protein content. [10]

As for the inputs portion, although FCR is commonly calculated using feed dry mass, it is sometimes calculated on an as-fed wet mass basis, (or in the case of grains and oilseeds, sometimes on a wet mass basis at standard moisture content), with feed moisture resulting in higher ratios. [11]

Conversion ratios for livestock

Animals that have a low FCR are considered efficient users of feed. However, comparisons of FCR among different species may be of little significance unless the feeds involved are of similar quality and suitability.

Beef cattle

As of 2013 in the US, an FCR calculated on live weight gain of 4.5–7.5 was in the normal range with an FCR above 6 being typical. [8] Divided by an average carcass yield of 62.2%, the typical carcass weight FCR is above 10. As of 2013 FCRs had not changed much compared to other fields in the prior 30 years, especially compared to poultry which had improved feed efficiency by about 250% over the last 50 years. [8]

Dairy cattle

The dairy industry traditionally didn't use FCR but in response to increasing concentration in the dairy industry and other livestock operations, the EPA updated its regulations in 2003 controlling manure and other waste releases produced by livestock operators. [12] : 11–11  In response the USDA began issuing guidance to dairy farmers about how to control inputs to better minimize manure output and to minimize harmful contents, as well as optimizing milk output. [13] [14]

In the US, the price of milk is based on the protein and fat content, so the FCR is often calculated to take that into account. [15] Using an FCR calculated just on the weight of protein and fat, as of 2011 an FCR of 13 was poor, and an FCR of 8 was very good. [15]

Another method for dealing with pricing based on protein and fat, is using energy-corrected milk (ECM), which adds a factor to normalize assuming certain amounts of fat and protein in a final milk product; that formula is (0.327 x milk mass) + (12.95 x fat mass) + (7.2 x protein mass). [11]

In the dairy industry, feed efficiency (ECM/intake) is often used instead of FCR (intake/ECM); an FE less than 1.3 is considered problematic. [13] [11]

FE based simply on the weight of milk is also used; an FE between 1.30 and 1.70 is normal. [10]

Pigs

Pigs have been kept to produce meat for 5,000 to 9,000 years. [16] As of 2011, pigs used commercially in the UK and Europe had an FCR, calculated using weight gain, of about 1 as piglets and ending about 3 at time of slaughter. [5] As of 2012 in Australia and using dressed weight for the output, a FCR calculated using weight of dressed meat of 4.5 was fair, 4.0 was considered "good", and 3.8, "very good". [17]

The FCR of pigs is greatest up to the period, when pigs weigh 220 pounds. During this period, their FCR is 3.5. [16] Their FCR begins increasing gradually after this period. For instance, in the US as of 2012, commercial pigs had FCR calculated using weight gain, of 3.46 for while they weighed between 240 and 250 pounds, 3.65 between 250 and 260 pounds, 3.87 between 260 and 270 lbs, and 4.09 between 280 and 270 lbs. [18]

Because FCR calculated on the basis of weight gained gets worse after pigs mature, as it takes more and more feed to drive growth, countries that have a culture of slaughtering pigs at very high weights, like Japan and Korea, have poor FCRs. [5]

Sheep

Some data for sheep illustrate variations in FCR. A FCR (kg feed dry matter intake per kg live mass gain) for lambs is often in the range of about 4 to 5 on high-concentrate rations, [19] [20] [21] 5 to 6 on some forages of good quality, [22] and more than 6 on feeds of lesser quality. [23] On a diet of straw, which has a low metabolizable energy concentration, FCR of lambs may be as high as 40. [24] Other things being equal, FCR tends to be higher for older lambs (e.g. 8 months) than younger lambs (e.g. 4 months). [21]

Poultry

As of 2011 in the US, broiler chickens has an FCR of 1.6 based on body weight gain, and mature in 39 days. [25] At around the same time the FCR based on weight gain for broilers in Brazil was 1.8. [25] The global average in 2013 is around 2.0 for weight gain (live weight) and 2.8 for slaughtered meat (carcass weight). [26]

For hens used in egg production in the US, as of 2011 the FCR was about 2, with each hen laying about 330 eggs per year. [25] When slaughtered, the world average layer flock as of 2013 yields a carcass FCR of 4.2, still much better than the average backyard chicken flock (FCR 9.2 for eggs, 14.6 for carcass). [26]

From the early 1960s to 2011 in the US broiler growth rates doubled and their FCRs halved, mostly due to improvements in genetics and rapid dissemination of the improved chickens. [25] The improvement in genetics for growing meat created challenges for farmers who breed the chickens that are raised by the broiler industry, as the genetics that cause fast growth decreased reproductive abilities. [27]

Carnivorous fish

In aquaculture, the fish feed for carnivorous fish commonly includes fish-derived products in the form of fishmeal and fish oil. There are therefore two ratios to be reported: [28] [29]

FIFO is a way of expressing the contribution from harvested wild fish used in aquafeed compared with the amount of edible farmed fish, as a ratio. The fish used in fishmeal and fish oil production are not used for human consumption, but with their use as fishmeal and fish oil in aquafeed they contribute to global food production.

Fishmeal and fish oil inclusion rates in aquafeeds have shown a continual decline over time as aquaculture grows and more feed is produced, but with a finite annual supply of fishmeal and fish oil. Calculations have shown that the overall fed aquaculture FIFO declined from 0.63 in 2000 to 0.33 in 2010, and 0.22 in 2015. In 2015, therefore, approximately 4.55 kg of farmed fish was produced for every 1 kg of wild fish harvested and used in feed. (For Salmon & Trout, the FIFO ratios for 2000, 2010, and 2015 are: 2.57, 1.38, 0.82.) [30]

As of 2015 farm-raised Atlantic salmon had a commodified feed supply with four main suppliers, and an FCR of around 1. [31] Tilapia is about 1.5, [32] and as of 2013 farmed catfish had a FCR of about 1. [8]

It is possible for fish to have an FCR below 1 despite obvious energy losses in feed-to-meat conversion. Fish feed tends to be dry food with higher energy density than water-rich fish flesh. [33]

Herbivorous and omnivorous fish

For herbivorous and omnivorous fish like Chinese carp and tilapia, the plant-based feed yields much lower FCR compared to carnivorous kept on a partially fish-based diet, despite a decrease in overall resource use. The edible (fillet) FCR of tilapia is around 4.6 and the FCR of Chinese carp is around 4.9. [34]

Rabbits

In India, rabbits raised for meat had an FCR of 2.5 to 3.0 on high grain diet and 3.5 to 4.0 on natural forage diet, without animal-feed grain. [35]

Global averages by species and production systems

In a global study, FAO estimated various feed conversion ratios, taking into account the diversity of feed material consumed by livestock. [36] [37] At global level, ruminants require 133 kg of dry matter per kg of protein while monogastrics require 30 kg. [36] [37] However, when considering human edible feed only, ruminants require 5.9 kg of feed to produce 1 kg of animal protein, while monogastrics require 15.8 kg. [36] [37] When looking at meat only, ruminants consume an average of 2.8 kg of human edible feed per kg of meat produced, while monogastrics need 3.2 kg. [36] [37] Finally, when accounting for the protein content of the feed, ruminant need an average of 0.6 kg of edible plant protein to produce 1 kg of animal protein while monogastric need 2 kg. [36] [37] This means that ruminants make a positive net contribution to the supply of edible protein for humans at global level. [36] [37]

Feed conversion ratios of meat alternatives

Many alternatives to conventional animal meat sources have been proposed for higher efficiency, including insects, meat analogues, and cultured meats. [34]

Insects

Although there are few studies of the feed conversion ratios of edible insects, the house cricket (Acheta domesticus) has been shown to have a FCR of 0.9 - 1.1 depending on diet composition. [38] A more recent work gives an FCR of 1.9–2.4. Reasons contributing to such a low FCR include the whole body being used for food, the lack of internal temperature control (insects are poikilothermic), high fecundity and rate of maturation. [34]

Meat analogue

If one treats tofu as a meat, the FCR reaches as low as 0.29. The FCRs for less watery forms of meat analogues are unknown. [34]

Cultured meat

Although cultured meat has a potentially much lower land footprint required, its FCR is closer to poultry at around 4 (2-8). It has a high need for energy inputs. [34]

See also

Related Research Articles

<span class="mw-page-title-main">Belgian Blue</span> Belgian breed of cattle

The Belgian Blue is a breed of beef cattle from Belgium. It may also be known as the Race de la Moyenne et Haute Belgique, or dikbil. Alternative names for this breed include Belgian Blue-White; Belgian White and Blue Pied; Belgian White Blue; Blue; and Blue Belgian. The Belgian Blue's extremely lean, hyper-sculpted, ultra-muscular physique is termed "double-muscling". The double-muscling phenotype is a heritable condition resulting in an increased number of muscle fibres (hyperplasia), instead of the (normal) enlargement of individual muscle fibres (hypertrophy).

<span class="mw-page-title-main">Meat</span> Animal flesh eaten as food

Meat is animal tissue, often muscle, that is eaten as food. Humans have hunted and farmed other animals for meat since prehistory. The Neolithic Revolution allowed the domestication of vertebrates, including chickens, sheep, goats, pigs, horses, and cattle, starting around 11,000 years ago. Since then, selective breeding has enabled farmers to produce meat with the qualities desired by producers and consumers.

<span class="mw-page-title-main">Animal husbandry</span> Management of farm animals

Animal husbandry is the branch of agriculture concerned with animals that are raised for meat, fibre, milk, or other products. It includes day-to-day care, management, production, nutrition, selective breeding, and the raising of livestock. Husbandry has a long history, starting with the Neolithic Revolution when animals were first domesticated, from around 13,000 BC onwards, predating farming of the first crops. During the period of ancient societies like ancient Egypt, cattle, sheep, goats, and pigs were being raised on farms.

<span class="mw-page-title-main">Fodder</span> Agricultural foodstuff used to feed domesticated animals

Fodder, also called provender, is any agricultural foodstuff used specifically to feed domesticated livestock, such as cattle, rabbits, sheep, horses, chickens and pigs. "Fodder" refers particularly to food given to the animals, rather than that which they forage for themselves. Fodder includes hay, straw, silage, compressed and pelleted feeds, oils and mixed rations, and sprouted grains and legumes. Most animal feed is from plants, but some manufacturers add ingredients to processed feeds that are of animal origin.

There are different systems of feeding cattle in animal husbandry. For pastured animals, grass is usually the forage that composes the majority of their diet. In turn, this grass-fed approach is known for producing meat with distinct flavor profiles. Cattle reared in feedlots are fed hay supplemented with grain, soy and other ingredients to increase the energy density of the feed. The debate is whether cattle should be raised on fodder primarily composed of grass or a concentrate. The issue is complicated by the political interests and confusion between labels such as "free range", "organic", or "natural". Cattle raised on a primarily foraged diet are termed grass-fed or pasture-raised; for example meat or milk may be called grass-fed beef or pasture-raised dairy. The term "pasture-raised" can lead to confusion with the term "free range", which does not describe exactly what the animals eat.

<span class="mw-page-title-main">Boer goat</span> South African breed of goat

The Boer or Boerbok is a South African breed of meat goat. It was selectively bred in the Eastern Cape from about 1920 for meat qualities and for the ability to survive by grazing on the thorn veldt of that region. It has been exported to many countries, and has been used to improve the meat qualities of other breeds.

<span class="mw-page-title-main">Fish meal</span> Commercial product made from fish to feed farm animals

Fish meal, sometimes spelt fishmeal, is a commercial product made from whole wild-caught fish, bycatch, and fish by-products to feed farm animals, e.g., pigs, poultry, and farmed fish. Because it is calorically dense and cheap to produce, fishmeal has played a critical role in the growth of factory farms and the number of farm animals it is possible to breed and feed.

High-quality feed block or HQFB, is a solid block consisting of molasses, non-protein nitrogen (NPN), rumen by-pass protein, minerals and lipids. It is provided to livestock ruminants in a manner similar to a salt lick.

<span class="mw-page-title-main">Beef cattle</span> Breed of cattle

Beef cattle are cattle raised for meat production. The meat of mature or almost mature cattle is mostly known as beef. In beef production there are three main stages: cow-calf operations, backgrounding, and feedlot operations. The production cycle of the animals starts at cow-calf operations; this operation is designed specifically to breed cows for their offspring. From here the calves are backgrounded for a feedlot. Animals grown specifically for the feedlot are known as feeder cattle, the goal of these animals is fattening. Animals not grown for a feedlot are typically female and are commonly known as replacement heifers. While the principal use of beef cattle is meat production, other uses include leather, and beef by-products used in candy, shampoo, cosmetics, and insulin.

<span class="mw-page-title-main">Protein (nutrient)</span> Nutrient for the human body

Proteins are essential nutrients for the human body. They are one of the building blocks of body tissue and can also serve as a fuel source. As a fuel, proteins provide as much energy density as carbohydrates: 17 kJ per gram; in contrast, lipids provide 37 kJ per gram. The most important aspect and defining characteristic of protein from a nutritional standpoint is its amino acid composition.

The dry matter or dry weight is a measure of the mass of a completely dried substance.

<span class="mw-page-title-main">Soybean meal</span> Ground soybeans used for food

Soybean meal is used in food and animal feeds, principally as a protein supplement, but also as a source of metabolizable energy. Typically 1 bushel of soybeans yields 48 lbs. (21.8 kg) of soybean meal. Soybean meal is produced as a co-product of soybean oil extraction. Some, but not all, soybean meal contains ground soybean hulls. Soybean meal is heat-treated during production, to denature the trypsin inhibitors of soybeans, which would otherwise interfere with protein digestion.

<span class="mw-page-title-main">Meat and bone meal</span> Product of the rendering industry

Meat and bone meal (MBM) is a product of the rendering industry. It is typically about 48–52% protein, 33–35% ash, 8–12% fat, and 4–7% water. It is primarily used in the formulation of animal feed to improve the amino acid profile of the feed. Feeding of MBM to cattle is thought to have been responsible for the spread of BSE ; therefore, in most parts of the world, MBM is no longer allowed in feed for ruminant animals. However, it is still used to feed monogastric animals.

<span class="mw-page-title-main">Commercial fish feed</span> Fish food manufactured commercially

Manufactured feeds are an important part of modern commercial aquaculture. They provide the balanced nutrition needed by farmed fish. The feeds, in the form of granules or pellets, give nutrition in a stable and concentrated form, enabling the fish to feed efficiently and grow to their full potential.

<span class="mw-page-title-main">Australian Yorkshire</span> Breed of pig

The Australian Yorkshire is a breed of domestic pig from Australia that was originally a part of the Yorkshire breed of pigs from Yorkshire, England. It is said to be the most common and popular breed of pig in Australia due to economic and nutritional advantages.

<i>Farmageddon</i> (book) 2014 book by Philip Lymbery and Isabel Oakeshott

Farmageddon: The True Cost of Cheap Meat is a 2014 non-fiction book by Philip Lymbery and Isabel Oakeshott. It surveys the effects of industrial livestock production and industrial fish farming around the world. The book is the result of Lymbery's investigations for which he travelled the world over three years. Isabel Oakeshott is the political editor of The Sunday Times, Lymbery is CEO of Compassion in World Farming. The book was published by Bloomsbury.

<span class="mw-page-title-main">Feed manufacturing</span> Production of animal feed

Feed manufacturing refers to the process of producing animal feed from raw agricultural products. Fodder produced by manufacturing is formulated to meet specific animal nutrition requirements for different species of animals at different life stages. According to the American Feed Industry Association (AFIA), there are four basic steps:

  1. Receive raw ingredients: Feed mills receive raw ingredients from suppliers. Upon arrival, the ingredients are weighed, tested and analyzed for various nutrients and to ensure their quality and safety.
  2. Create a formula: Nutritionists work side by side with scientists to formulate nutritionally sound and balanced diets for livestock, poultry, aquaculture and pets. This is a complex process, as every species has different nutritional requirements.
  3. Mix ingredients: Once the formula is determined, the mill mixes the ingredients to create a finished product.
  4. Package and label: Manufacturers determine the best way to ship the product. If it is prepared for retail, it will be "bagged and tagged," or placed into a bag with a label that includes the product's purpose, ingredients and instructions. If the product is prepared for commercial use, it will be shipped in bulk.
<span class="mw-page-title-main">FutureFeed</span>

FutureFeed was established by Australia's Commonwealth Scientific and Industrial Research Organisation (CSIRO) for seaweed as a ruminant livestock feed ingredient that can reduce methane emissions by 80% or more. FutureFeed holds the global intellectual property to use Asparagopsis for livestock feed. Lowered methane emissions can be achieved by the addition of a small amount of the seaweed into the daily diet of livestock. This discovery was made by a team of scientists from CSIRO and James Cook University (JCU), supported by Meat & Livestock Australia (MLA), who came together in 2013 to investigate the methane reduction potential of various native Australian seaweeds.

<span class="mw-page-title-main">Jarman–Bell principle</span> Ecological concept linking an herbivores diet and size

The Jarman–Bell principle is a concept in ecology that the food quality of a herbivore's intake decreases as the size of the herbivore increases, but the amount of such food increases to counteract the low quality foods. It operates by observing the allometric properties of herbivores. The principle was coined by P.J Jarman (1968.) and R.H.V Bell (1971).

<span class="mw-page-title-main">Insects as feed</span>

Insects as feed are insect species used as animal feed, either for livestock, including aquaculture, or as pet food.

References

  1. 1 2 Dan Shike, University of Illinois Beef Cattle Feed Efficiency
  2. 1 2 DJ Cottle and WS Pitchford. Production Efficiency. Chapter 18 in Beef Cattle Production and Trade, Ed Lewis Kahn. Csiro Publishing, 2014 ISBN   9780643109896 Pp 439-440
  3. ↑ Stickney, Robert R. (2009) Aquaculture: An Introductory Text, page 248, CABI, ISBN   9781845935894.
  4. ↑ Arthur P.F. et al. 2014 Lessons Learnt from 25 Years of Feed Efficiency Research in Australia. Proceedings, 10th World Congress of Genetics Applied to Livestock Production. Abstract here
  5. 1 2 3 4 Mike Varley for Pig Progress. Taking control of feed conversion ratio Apr 1, 2009, Last update:Jan 26, 2011
  6. ↑ National Research Council (Subcommittee on Environmental Stress). 1981. Effect of environment on nutrient requirements of domestic animals. National Academy Press, Washington. 168 pp.
  7. ↑ Dennis DiPietre for Pig 333. April 21, 2014 Feed Conversion Ratio: critically important but often misused
  8. 1 2 3 4 5 Dan W. Shike, Ph.D., University of Illinois at Urbana-Champaign Driftless Region Beef Conference 2013 Beef Cattle Feed Efficiency
  9. ↑ Travis D. Maddock, Darren D. Henry, and G. Cliff Lamb. Animal Sciences Department, UF/IFAS Extension. AN217: The Economic Impact of Feed Efficiency in Beef Cattle Original publication date May 2009. Revised October 2015.
  10. 1 2 Robert C. Fry, Atlantic Dairy Management Services. Measuring Feed Efficiency Why & How on the Back of a Napkin
  11. 1 2 3 Virginia Ishler for Progressive Dairyman. June 30, 2014 Calculating feed efficiency
  12. ↑ Cornell University, University of Wisconsin-Madison, USDA-Agricultural Research Service, Dairy Forage Research Center April 30, 2004 Whole-Farm Nutrient Management on Dairy Farms to Improve Profitability and Reduce Environmental Impacts
  13. 1 2 Michael F. Hutjens August 21, 2012 Feed Efficiency and Its Impact on Feed Intake
  14. ↑ USDA Natural Resources Conservation Service Conservation Practice Standard: Feed Management: (Animal Units (AUs) Affected): Code 592. September 2011
  15. 1 2 Tony Hall for Eastern Dairy Business September 2011 Define And Improve Your Herd’s Feed Conversion Ratio
  16. 1 2 Jukes TH (February 1992). "Today's non-Orwellian animal farm". Nature. 355 (6361): 582. doi: 10.1038/355582a0 . PMID   1538742. S2CID   4308400.
  17. ↑ Department of Agriculture and Fisheries, Queensland Government. Managing a piggery >> Production and performance >> Performance standards Last updated 28 September 2012
  18. ↑ David R. Stender, Iowa State University Extension. IPIC 25h. Swine Feed Efficiency: Influence of Market Weight 2012
  19. ↑ Knott, S. A., B. J. Leury, L. J. Cummins, F. D. Brien and F. R. Dunshea. 2003. Relationship between body composition, net feed intake and gross feed conversion efficiency in composite sire line sheep. In: Souffrant, W. B. and C. C. Metges (eds.). Progress in research on energy and protein metabolism. EAAP publ. no. 109. Wageningen
  20. ↑ Brand, T. S., S. W. P. Cloete and F. Franck. 1991. Wheat-straw as roughage component in finishing diets of growing lambs. S. Afr. J. Anim. Sci 21: 184-188.
  21. 1 2 National Research Council. 2007. Nutrient requirements of small ruminants. National Academies Press. 362 pp.
  22. ↑ Fahmy, M. H., J. M. Boucher, L. M. Pose, R. Grégoire, G. Butler and J. E. Comeau. 1992. Feed efficiency, carcass characteristics, and sensory quality of lambs, with or without prolific ancestry, fed diets with different protein supplements. J. Anim. Sci. 70: 1365-1374
  23. ↑ Malik, R. C., M. A. Razzaque, S. Abbas, N. Al-Khozam and S. Sahni. 1996. Feedlot growth and efficiency of three-way cross lambs as affected by genotype, age and diet. Proc. Aust. Soc. Anim. Prod. 21: 251-254.
  24. ↑ Cronjé. P. B. and E. Weites. 1990. Live mass, carcass and wool growth responses to supplementation of a roughage diet with sources of protein and energy in South African Mutton Merino lambs. S. Afr. J. Anim. Sci. 20: 141-168
  25. 1 2 3 4 Peter Best for WATTagnet.com November 24, 2011 Poultry performance improves over past decades
  26. 1 2 MacLeod, M.; Gerber, P.; Mottet, A.; Tempio, G.; Falcucci, A.; Opio, C.; Vellinga, T.; Henderson, B.; Steinfeld, H. (2013). Greenhouse gas emissions from pig and chicken supply chains – a global life cycle assessment (PDF). Food and Agriculture Organization of the United Nations. ISBN   978-92-5-107944-7.
  27. ↑ Mississippi State University Extension Service Broiler Breeder Management Is No Easy Task, 2013
  28. ↑ "FIFO explanation document" (PDF). Archived from the original (PDF) on 2016-10-10. Retrieved 2016-06-04.
  29. ↑ "FIFO explained". Archived from the original on 2016-07-01. Retrieved 2016-06-04.
  30. ↑ "Fish in: Fish Out (FIFO) ratios for the conversion of wild feed to farmed fish, including salmon | IFFO - The Marine Ingredients Organisation". IFFO. 2010-04-16. Retrieved 2020-04-04.
  31. ↑ FAO Cultured Aquatic Species Information Programme: Salmo salar (Linnaeus, 1758) 2004
  32. ↑ Dennis P. DeLong, Thomas M. Losordo and James E. Rakocy Southern Regional Aquaculture Center SRAC Publication No. 282: Tank Culture of Tilapia June 2009
  33. ↑ USAID Harvest. "Technical Bulletin #07: Feed Conversion Ratio (FCR): How to calculate it and how it is used" (PDF). Retrieved 22 March 2024.
  34. 1 2 3 4 5 Alexander, Peter; Brown, Calum; Arneth, Almut; Dias, Clare; Finnigan, John; Moran, Dominic; Rounsevell, Mark D.A. (December 2017). "Could consumption of insects, cultured meat or imitation meat reduce global agricultural land use?". Global Food Security. 15: 22–32. Bibcode:2017GlFS...15...22A. doi: 10.1016/j.gfs.2017.04.001 . hdl: 20.500.11820/17f627e0-ff81-4492-87d8-97bd6f454840 .
  35. ↑ Tamilnadu Veterinary Animal Sciences University Extension Service. TNAU Animal Husbandry ::Rabbit No date on website; site accessed June 16, 2016
  36. 1 2 3 4 5 6 Mottet, A.; de Haan, C.; Falcucci, A.; Tempio, G.; Opio, C.; Gerber, P. (2022). More fuel for the food/feed debate. Rome: FAO.
  37. 1 2 3 4 5 6 Mottet, Anne; de Haan, Cees; Falcucci, Alessandra; Tempio, Giuseppe; Opio, Carolyn; Gerber, Pierre (2017-09-01). "Livestock: On our plates or eating at our table? A new analysis of the feed/food debate". Global Food Security. Food Security Governance in Latin America. 14: 1–8. Bibcode:2017GlFS...14....1M. doi:10.1016/j.gfs.2017.01.001. ISSN   2211-9124.
  38. ↑ In Huis, Arnold. (2012). Potential of Insects as Food and Feed in Assuring Food Security. Annual review of entomology. 58. 10.1146/annurev-ento-120811-153704
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.