Development
In December 1938, a new unit was created in the British military that soon became known as Military Intelligence (Research), which is sometimes abbreviated as MI(R) or occasionally as MIR. MI(R) absorbed a technical section that was at first known as MI(R)c. In April 1939, Joe Holland, the head of MIR, recruited his old friend Major Millis Rowland Jefferis as director of the technical section. [2] Under his leadership the team developed a wide range of innovative weapons. [3] [4]
One of Jefferis' earliest ideas was a type of mine that could be towed behind a rowboat, which would attach itself to the hull of a ship that it passed. Getting a heavy bomb to stick to a ship reliably was a problem. The obvious answer was to use magnets, which should be as powerful as possible.
In July 1939, Jefferis read an issue of the popular magazine Armchair Science , which contained a small article on magnets:
The most powerful permanent magnet in the world—for its size—has been developed in the research laboratories of the General Electric Company in New York. Only half the size of the eraser on a lead pencil, it will lift a flat-iron weighing 5 pounds [2.3 kg]. Its magnetic attraction is several times as strong as that of any previous magnet. The strongly magnetic alloy forming the magnet can be used, too, in electrical equipment to replace electro-magnets that require current. [5]
On 17 July 1939, Jefferis contacted magazine editor Stuart Macrae for more information about the magnets.
During World War I, Macrae had briefly worked on a device for dropping hand grenades from aircraft, and he longed for a return to working on such challenges. When Jefferis' call came, Macrae promptly undertook to perform experiments and to produce prototypes. He contacted Cecil Vandepeer Clarke, managing director of the Low Loading Trailer Company. Macrae had met Clarke a couple of years previously when he was the editor of The Caravan & Trailer magazine. He had been impressed by Clarke's work, and now he wanted his expertise and the use of his workshops in Bedford. [6] [7] Macrae and Clarke soon agreed to cooperate on the design of a new weapon, but they quickly abandoned a towed mine as impractical. Instead, they worked on a bomb that could be carried by a diver and attached directly to a ship. [8] The new weapon became known as a limpet mine.
The first versions were assembled in a few weeks. Because of the time required to source the General Electric magnets from the United States, Macrae bought some toy horseshoe magnets from an ironmonger's shop, which were found to be adequate. [9] The body of the prototype was a large metal kitchen bowl obtained from the Bedford branch of Woolworths and modified by a local tinsmith to retain the magnets around the rim. After much experimentation, it was found that the detonator could be actuated by a slowly dissolving aniseed ball sweet to provide the necessary time to escape. [10] The sweets, which had initially been left in the workshop by Clarke's children, were the only substance tested which dissolved at a predictable rate. To protect this mechanism from damp which might cause premature detonation, it was covered by a condom which had to be removed before use. The prototype was tested in the swimming pool at Bedford Public Baths, using a steel plate lowered into the deep end to simulate a ship's hull. [11]
Just before war was declared, Macrae's name was put forward to Holland, who arranged to meet him. Holland considered that Macrae would make a good second in command for Jefferis: He saw Macrae as a capable administrator who could keep his geniuses in order. Macrae joined the War Office as a civilian and Holland saw to it that Macrae got a commission in October 1939 (backdated to 1 September). [8]
Clarke joined the top secret Cultivator No. 6 project as a civilian and later joined the army. He served in the Special Operations Executive (SOE) with Colin Gubbins and was later Commandant of one of the Secret Intelligence Service's schools. [12] He eventually rejoined Macrae when he was transferred to MD1 in 1942.
The "rigid limpets" used by the British during World War II contained only 4+1⁄2 pounds (2.0 kg) of explosive, [13] but placed two metres (6.6 ft) below the waterline they made a wide hole in an unarmoured ship. [14] SOE agents could be provided with a five-foot-long (1.5 m) placing rod. [15]
A smaller version named "Clam" was developed from the British limpet for use on land. It was intended for use against tanks, but before the British got a chance to deploy it, the Germans adopted Zimmerit coating on their tanks, which prevented magnetic mines from sticking to the armor. This was because the Germans were the largest user of magnetic mines during the war, such as the Hafthohlladung or Hassenhuttl, a shaped-charge anti-tank grenade which attached magnetically to a target. They feared that the Soviets would easily reverse-engineer this weapon and use it against them. In the end, the Soviets didn't care for the idea of the magnetic mine, and the Germans stopped using Zimmerit for the last year of the war. The British limpet adaptation was not the first magnetic mine and was not the reason that Zimmerit coating was developed.[ citation needed ] However, the Clam was found to be useful for sabotage and was enthusiastically adopted by the SOE. Using only an 8 ounces (230 g) charge, it could easily be concealed in a coat pocket and was capable of destroying a vehicle or aircraft. Some 2.5 million Clams were manufactured by M.D.1, the successor to MI(R), during the war. [16]
