Boric acid

Last updated

Contents

Orthoboric acid
Structural formula Boric-acid-2D.png
Structural formula
Space-filling model Boric-acid-3D-vdW.png
Space-filling model
Boric acid.jpg
Names
IUPAC name
Boric acid [1]
Other names
Orthoboric acid, Boracic acid, Sassolite, Borofax, Trihydroxyborane, Boranetriol, Hydrogen borate, Acidum boricum
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.030.114 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 233-139-2
E number E284 (preservatives)
KEGG
PubChem CID
UNII
  • InChI=1S/BH3O3/c2-1(3)4/h2-4H Yes check.svgY
    Key: KGBXLFKZBHKPEV-UHFFFAOYSA-N Yes check.svgY
  • InChI=1/BH3O3/c2-1(3)4/h2-4H
    Key: KGBXLFKZBHKPEV-UHFFFAOYAI
  • OB(O)O
  • [OH+]=[B-](O)O
Properties
BH3O3
Molar mass 61.83 g·mol−1
AppearanceWhite crystalline solid
Density 1.435 g/cm3
Melting point 170.9 °C (339.6 °F; 444.0 K)
Boiling point 300 °C (572 °F; 573 K)
2.52 g/100 mL (0 °C)
4.72 g/100 mL (20 °C)
5.7 g/100 mL (25 °C)
19.10 g/100 mL (80 °C)
27.53 g/100 mL (100 °C)
Solubility in other solventsSoluble in lower alcohols
moderately soluble in pyridine
very slightly soluble in acetone
log P -0.29 [2]
Acidity (pKa)9.24 (first proton),12.4 (second),13.3 (complete)
Conjugate base Borate
-34.1·10−6 cm3/mol
Structure
Trigonal planar
0 D
Pharmacology
S02AA03 ( WHO ) D08AD ( WHO )
Hazards
GHS labelling:
GHS-pictogram-silhouette.svg
NFPA 704 (fire diamond)
NFPA 704.svgHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
0
0
Flash point Nonflammable
Lethal dose or concentration (LD, LC):
2660 mg/kg, oral (rat)
Related compounds
Related compounds
 Boron trioxide
Borax
Supplementary data page
Boric acid (data page)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

Boric acid, more specifically orthoboric acid, is a compound of boron, oxygen, and hydrogen with formula B(OH)3. It may also be called hydrogen orthoborate , trihydroxidoboron or boracic acid. [3] It is usually encountered as colorless crystals or a white powder, that dissolves in water, and occurs in nature as the mineral sassolite. It is a weak acid that yields various borate anions and salts, and can react with alcohols to form borate esters.

Boric acid is often used as an antiseptic, insecticide, flame retardant, neutron absorber, or precursor to other boron compounds.

The term "boric acid" is also used generically for any oxoacid of boron, such as metaboric acid HBO2 and tetraboric acid H2B4O7.

History

Orthoboric acid was first prepared by Wilhelm Homberg (1652–1715) from borax, by the action of mineral acids, and was given the name sal sedativum Hombergi ("sedative salt of Homberg"). However boric acid and borates have been used since the time of the ancient Greeks for cleaning, preserving food, and other activities. [4]

Molecular and crystal structure

The three oxygen atoms form a trigonal planar geometry around the boron. The B-O bond length is 136 pm and the O-H is 97 pm. The molecular point group is C3h. [5]

Two crystalline forms of orthoboric acid are known: triclinic with space group P1, and trigonal with space group P32. The former is the most common; the second, which is a bit more stable thermodynamically, can be obtained with a special preparation method. [6]

The triclinic form of boric acid consists of layers of B(OH)3 molecules held together by hydrogen bonds with an O...O separation of 272 pm. The distance between two adjacent layers is 318 pm. [7] While the layers of the triclinic phase are nearly trigonal with γ = 119.76°, a = 701.87 pm, and b = 703.5 pm (compared to a = 704.53(4) pm for the trigonal form), the stacking of the layers is somewhat offset in the triclinic phase, with α = 92.49° and β = 101.46°. The triclinic phase has c = 634.72 pm and the trigonal one has a = 956.08(7) pm. [8] [9]

Boric-acid-unit-cell-3D-balls.png
Boric-acid-layer-3D-balls.png
The unit cell of boric acid
hydrogen bonding (dashed lines)
allows boric acid molecules to form
parallel layers in the solid state

Preparation

Boric acid may be prepared by reacting borax (sodium tetraborate decahydrate) with a mineral acid, such as hydrochloric acid:

Na2B4O7·10H2O + 2 HCl → 4 B(OH)3 + 2 NaCl + 5 H2O

It is also formed as a by product of hydrolysis of boron trihalides and diborane: [10]

B2H6 + 6 H2O → 2 B(OH)3 + 6 H2
BX3 + 3 H2O → B(OH)3 + 3 HX (X = Cl, Br, I)

Reactions

Pyrolysis

When heated, orthoboric acid undergoes a three step dehydration. The reported transition temperatures vary substantially from source to source.[ citation needed ]

When heated above 140 °C, orthoboric acid yields metaboric acid (HBO2) with loss of one water molecule: [11] [12]

B(OH)3 → HBO2 + H2O

Heating metaboric acid above about 180 °C eliminates another water molecule forming tetraboric acid, also called pyroboric acid (H2B4O7): [11] [12]

4 HBO2 → H2B4O7 + H2O

Further heating (to about 530 °C) leads to boron trioxide: [13] [11] [12]

H2B4O7 → 2 B2O3 + H2O

Aqueous solution

When orthoboric acid is dissolved in water, it partially dissociates to give metaboric acid:

B(OH)3⇌HBO2 + H2O

The solution is mildly acidic due to ionization of the acids:

B(OH)3 + H2O⇌[BO(OH)2]− + H3O+
HBO2 + H2O⇌[BO2]− + H3O+

However, Raman spectroscopy of strongly alkaline solutions has shown the presence of [B(OH)4]− ions, [14] leading some to conclude that the acidity is exclusively due to the abstraction of OH− from water: [14]

B(OH)3 + HO−⇌B(OH)−4

Equivalently,

B(OH)3 + H2O⇌B(OH)−4 +   H+ (Ka = 7.3×10−10; pKa = 9.14)

Or, more properly,

B(OH)3 + 2 H2O⇌B(OH)−4 + H3O+

This reaction occurs in two steps, with the neutral complex aquatrihydroxyboron B(OH)3(OH2) as an intermediate: [15]

  1. B(OH)3 + H2O → B(OH)3(OH2)
  2. B(OH)3(OH2) + H2O → [B(OH)4]− + H3O+

This reaction may be characterized as Lewis acidity of boron toward HO−, rather than as Brønsted acidity. [16] [17] [18] However, some of its behaviour towards some chemical reactions suggest it to be a tribasic acid in the Brønsted-Lowry sense as well.

Boric acid, mixed with borax Na2B4O7·10H2O (more properly Na2B4O5(OH)4·8H2O) in the weight ratio of 4:5, is highly soluble in water, though they are not so soluble separately. [19]

Sulfuric acid solution

Boric acid also dissolves in anhydrous sulfuric acid according to the equation: [7]

B(OH)3 + 6 H2SO4 → [B(SO4H)4]− + 2 [HSO4]− + 3 H3O+

The product is an extremely strong acid, even stronger than the original sulfuric acid. [7]

Esterification

Boric acid reacts with alcohols to form borate esters, B(OR)3 where R is alkyl or aryl. The reaction is typically driven by a dehydrating agent, such as concentrated sulfuric acid: [20]

B(OH)3 + 3 ROH → B(OR)3 + 3 H2O

With vicinal diols

The acidity of boric acid solutions is greatly increased in the presence of cis-vicinal diols (organic compounds containing similarly oriented hydroxyl groups in adjacent carbon atoms, (R1,R2)=C(OH)−C(OH)=(R3,R4)) such as glycerol and mannitol. [21] [7] [22]

The tetrahydroxyborate anion formed in the dissolution spontaneously reacts with these diols to form relatively stable anion esters containing one or two five-member −B−O−C−C−O− rings. For example, the reaction with mannitol H(HCOH)6H, whose two middle hydroxyls are in cis orientation, can be written as

B(OH)3 + H2O⇌[B(OH)4]− + H+
[B(OH)4]− + H(HCOH)6H⇌[B(OH)2(H(HCOH)2(HCO−)2(HCOH)2H)]− + 2 H2O
[B(OH)2(H(HCOH)2(HCO−)2(HCOH)2H)]− + H(HCOH)6H⇌[B(H(HCOH)2(HCO−)2(HCOH)2H)2]− + 2 H2O

Giving the overall reaction

B(OH)3 + 2 H(HCOH)6H⇌[B(H(HCOH)2(HCO−)2(HCOH)2H)2]− + 3 H2O + H+

The stability of these mannitoborate ester anions shifts the equilibrium of the right and thus increases the acidity of the solution by 5 orders of magnitude compared to that of pure boric oxide, lowering the pKa from 9 to below 4 for sufficient concentration of mannitol. [21] [7] [22] The resulting solution has been called mannitoboric acid.

The addition of mannitol to an initially neutral solution containing boric acid or simple borates lowers its pH enough for it to be titrated by a strong base as NaOH, including with an automated a potentiometric titrator. This property is used in analytical chemistry to determine the borate content of aqueous solutions, for example to monitor the depletion of boric acid by neutrons in the water of the primary circuit of light-water reactor when the compound is added as a neutron poison during refueling operations. [7]

Toxicology

Based on mammalian median lethal dose (LD50) rating of 2,660 mg/kg body mass, boric acid is only poisonous if taken internally or inhaled in large quantities. The Fourteenth Edition of the Merck Index indicates that the LD50 of boric acid is 5.14 g/kg for oral dosages given to rats, and that 5 to 20 g/kg has produced death in adult humans. For a 70 kg adult, at the lower 5 g/kg limit, 350 g could produce death in humans. For comparison's sake, the LD50 of salt is reported to be 3.75 g/kg in rats according to the Merck Index. According to the Agency for Toxic Substances and Disease Registry, "The minimal lethal dose of ingested boron (as boric acid) was reported to be 2–3 g in infants, 5–6 g in children, and 15–20 g in adults. [...] However, a review of 784 human poisonings with boric acid (10–88 g) reported no fatalities, with 88% of cases being asymptomatic." [23]

Long-term exposure to boric acid may be of more concern, causing kidney damage and eventually kidney failure (see links below). Although it does not appear to be carcinogenic, studies in dogs have reported testicular atrophy after exposure to 32 mg/(kg⋅day) for 90 days. This level, were it applicable to humans at like dose, would equate to a cumulative dose of 202 g over 90 days for a 70 kg adult, not far lower than the above LD50. [24]

According to the CLH report for boric acid published by the Bureau for Chemical Substances Lodz, Poland, boric acid in high doses shows significant developmental toxicity and teratogenicity in rabbit, rat, and mouse fetuses, as well as cardiovascular defects, skeletal variations, and mild kidney lesions. [25] As a consequence in the 30th ATP to EU directive 67/548/EEC of August 2008, the European Commission decided to amend its classification as reprotoxic category 2 and to apply the risk phrases R60 (may impair fertility) and R61 (may cause harm to the unborn child). [26] [27] [28] [29] [30]

At a 2010 European Diagnostics Manufacturing Association (EDMA) Meeting, several new additions to the substance of very high concern (SVHC) candidate list in relation to the Registration, Evaluation, Authorisation and Restriction of Chemicals Regulations 2007 (REACH) were discussed. Following the registration and review completed as part of REACH, the classification of boric acid CAS 10043-35-3 / 11113-50-1 is listed from 1 December 2010 is H360FD (May damage fertility. May damage the unborn child). [31] [32]

Uses

Industrial

The primary industrial use of boric acid is in the manufacture of monofilament fiberglass usually referred to as textile fiberglass. Textile fiberglass is used to reinforce plastics in applications that range from boats, to industrial piping to computer circuit boards. [33]

In the jewelry industry, boric acid is often used in combination with denatured alcohol to reduce surface oxidation and formation of firescale on metals during annealing and soldering operations. [34] [35]

Boric acid is used in the production of the glass in LCD flat panel displays. [36] [37]

In electroplating, boric acid is used as part of some proprietary formulas. One known formula uses about a 1 to 10 ratio of H
3BO
3 to NiSO
4, a very small portion of sodium lauryl sulfate and a small portion of H
2SO
4.

The solution of orthoboric acid and borax in 4:5 ratio is used as a fire retarding agent of wood by impregnation. [38]

It is also used in the manufacturing of ramming mass, a fine silica-containing powder used for producing induction furnace linings and ceramics.

Boric acid is added to borax for use as welding flux by blacksmiths. [39]

Boric acid, in combination with polyvinyl alcohol (PVA) or silicone oil, is used to manufacture Silly Putty. [40]

Boric acid is also present in the list of chemical additives used for hydraulic fracturing (fracking) in the Marcellus Shale in Pennsylvania. [41] It is often used in conjunction with guar gum as cross-linking and gelling agent for controlling the viscosity and the rheology of the fracking fluid injected at high pressure in the well. It is important to control the fluid viscosity for keeping in suspension on long transport distances the grains of the propping agents aimed at maintaining the cracks in the shales sufficiently open to facilitate the gas extraction after the hydraulic pressure is relieved. [42] [43] [44] The rheological properties of borate cross-linked guar gum hydrogel mainly depend on the pH value. [45]

Boric acid is used in some expulsion-type electrical fuses as a de-ionization/extinguishing agent. [46] During an electrical fault in an expulsion-type fuse, a plasma arc is generated by the disintegration and rapid spring-loaded separation of the fusible element, which is typically a specialized metal rod that passes through a compressed mass of boric acid within the fuse assembly. The high-temperature plasma causes the boric acid to rapidly decompose into water vapor and boric anhydride, and in-turn, the vaporization products de-ionize the plasma, helping to interrupt the electrical fault. [47]

Medical

Boric acid can be used as an antiseptic for minor burns or cuts and is sometimes used in salves and dressings, such as boracic lint. Boric acid is applied in a very dilute solution as an eye wash. Boric acid vaginal suppositories can be used for recurrent candidiasis due to non-albicans candida as a second line treatment when conventional treatment has failed. [48] [49] It is less effective than conventional treatment overall. [48] Boric acid largely spares lactobacilli within the vagina. [50] As TOL-463, it is under development as an intravaginal medication for the treatment for vulvovaginal candidiasis. [51] [52] [53]

As an antibacterial compound, boric acid can also be used as an acne treatment. It is also used as prevention of athlete's foot, by inserting powder in the socks or stockings. Various preparations can be used to treat some kinds of otitis externa (ear infection) in both humans and animals. [54] The preservative in urine sample bottles in the UK is boric acid. [55]

Boric acid solutions used as an eye wash or on abraded skin are known to be toxic, particularly to infants, especially after repeated use; this is because of its slow elimination rate. [56]

Boric acid is one of the most commonly used substances that can counteract the harmful effects of reactive hydrofluoric acid (HF) after an accidental contact with the skin. It works by forcing the free F− anions into the inert tetrafluoroborate anion. This process defeats the extreme toxicity of hydrofluoric acid, particularly its ability to sequester ionic calcium from blood serum which can lead to cardiac arrest and bone decomposition; such an event can occur from just minor skin contact with HF. [57] [ failed verification ]

Insecticidal

Boric acid was first registered in the US as an insecticide in 1948 for control of cockroaches, termites, fire ants, fleas, silverfish, and many other insects. The product is generally considered to be safe to use in household kitchens to control cockroaches and ants. It acts as a stomach poison affecting the insects' metabolism, and the dry powder is abrasive to the insects' exoskeletons. [58] [59] [60] Boric acid also has the reputation as "the gift that keeps on killing" in that cockroaches that cross over lightly dusted areas do not die immediately, but that the effect is like shards of glass cutting them apart. This often allows a roach to go back to the nest where it soon dies. Cockroaches, being cannibalistic, eat others killed by contact or consumption of boric acid, consuming the powder trapped in the dead roach and killing them, too.[ citation needed ]

Boric acid has also been widely used in the treatment of wood for protection against termites. The full complexity of its mechanism is not fully understood, but aside from causing dose-dependent mortality, boric acid causes dysbiosis in the Eastern Subterranean termite, leading to the opportunistic rise of insect pathogens that could be contributing to mortality. [61]

Preservation

In combination with its use as an insecticide, boric acid also prevents and destroys existing wet and dry rot in timbers. It can be used in combination with an ethylene glycol carrier to treat external wood against fungal and insect attack. It is possible to buy borate-impregnated rods for insertion into wood via drill holes where dampness and moisture is known to collect and sit. It is available in a gel form and injectable paste form for treating rot affected wood without the need to replace the timber. Concentrates of borate-based treatments can be used to prevent slime, mycelium, and algae growth, even in marine environments.[ citation needed ]

Boric acid is added to salt in the curing of cattle hides, calfskins, and sheepskins. This helps to control bacterial development, and helps to control insects.[ citation needed ]

pH buffer

Boric acid predominates in solution below pH 9 Borate pH.gif
Boric acid predominates in solution below pH 9
Boric acid buffers against rising pH in swimming pools Borate buffer.gif
Boric acid buffers against rising pH in swimming pools

Boric acid in equilibrium with its conjugate base the borate ion is widely used (in the concentration range 50–100 ppm boron equivalents) as a primary or adjunct pH buffer system in swimming pools. Boric acid is a weak acid, with pKa (the pH at which buffering is strongest because the free acid and borate ion are in equal concentrations) of 9.24 in pure water at 25 °C. But apparent pKa is substantially lower in swimming pool or ocean waters because of interactions with various other molecules in solution. It will be around 9.0 in a salt-water pool. No matter which form of soluble boron is added, within the acceptable range of pH and boron concentration for swimming pools, boric acid is the predominant form in aqueous solution, as shown in the accompanying figure. The boric acid – borate system can be useful as a primary buffer system (substituting for the bicarbonate system with pKa1 = 6.0 and pKa2 = 9.4 under typical salt-water pool conditions) in pools with salt-water chlorine generators that tend to show upward drift in pH from a working range of pH 7.5–8.2. Buffer capacity is greater against rising pH (towards the pKa around 9.0), as illustrated in the accompanying graph. The use of boric acid in this concentration range does not allow any reduction in free HOCl concentration needed for pool sanitation, but it may add marginally to the photo-protective effects of cyanuric acid and confer other benefits through anti-corrosive activity or perceived water softness, depending on overall pool solute composition. [62]

Lubrication

Colloidal suspensions of nanoparticles of boric acid dissolved in petroleum or vegetable oil can form a remarkable lubricant on ceramic or metal surfaces [63] with a coefficient of sliding friction that decreases with increasing pressure to a value ranging from 0.10 to 0.02. Self-lubricating B(OH)3 films result from a spontaneous chemical reaction between water molecules and B2O3 coatings in a humid environment. In bulk-scale, an inverse relationship exists between friction coefficient and Hertzian contact pressure induced by applied load.[ citation needed ]

Boric acid is used to lubricate carrom and novuss boards, allowing for faster play. [64]

Nuclear power

Boric acid is used in some nuclear power plants as a neutron poison. The boron in boric acid reduces the probability of thermal fission by absorbing some thermal neutrons. Fission chain reactions are generally driven by the probability that free neutrons will result in fission and is determined by the material and geometric properties of the reactor. Natural boron consists of approximately 20% boron-10 and 80% boron-11 isotopes. Boron-10 has a high cross-section for absorption of low energy (thermal) neutrons. By increasing boric acid concentration in the reactor coolant, the probability that a neutron will cause fission is reduced. Changes in boric acid concentration can effectively regulate the rate of fission taking place in the reactor. During normal at power operation, boric acid is used only in pressurized water reactors (PWRs), whereas boiling water reactors (BWRs) employ control rod pattern and coolant flow for power control, although BWRs can use an aqueous solution of boric acid and borax or sodium pentaborate for an emergency shutdown system if the control rods fail to insert. Boric acid may be dissolved in spent fuel pools used to store spent fuel elements. The concentration is high enough to keep neutron multiplication at a minimum. Boric acid was dumped over Reactor 4 of the Chernobyl nuclear power plant after its meltdown to prevent another reaction from occurring.[ citation needed ]

Pyrotechnics

Boron is used in pyrotechnics to prevent the amide-forming reaction between aluminium and nitrates. A small amount of boric acid is added to the composition to neutralize alkaline amides that can react with the aluminium.

Boric acid can be used as a colorant to make fire green. For example, when dissolved in methanol it is popularly used by fire jugglers and fire spinners to create a deep green flame much stronger than copper sulfate. [65]

Agriculture

Boric acid is used to treat or prevent boron deficiencies in plants. It is also used in preservation of grains such as rice and wheat. [66]

Related Research Articles

<span class="mw-page-title-main">Boron</span> Chemical element with atomic number 5 (B)

Boron is a chemical element. It has the symbol B and atomic number 5. In its crystalline form it is a brittle, dark, lustrous metalloid; in its amorphous form it is a brown powder. As the lightest element of the boron group it has three valence electrons for forming covalent bonds, resulting in many compounds such as boric acid, the mineral sodium borate, and the ultra-hard crystals of boron carbide and boron nitride.

A borate is any of a range of boron oxyanions, anions containing boron and oxygen, such as orthoborate BO3−3, metaborate BO−2, or tetraborate B4O2−7; or any salt of such anions, such as sodium metaborate, Na+[BO2]− and borax (Na+)2[B4O7]2−. The name also refers to esters of such anions, such as trimethyl borate B(OCH3)3 but they are alkoxides.

<span class="mw-page-title-main">Borax</span> Boron compound, a salt of boric acid

Borax (also referred to as sodium borate, tincal and tincar ) is a salt (ionic compound), a hydrated or anhydrous borate of sodium, with the chemical formula Na2H20B4O17 (also written as Na2B4O7·10H2O).

The self-ionization of water (also autoionization of water, autoprotolysis of water, autodissociation of water, or simply dissociation of water) is an ionization reaction in pure water or in an aqueous solution, in which a water molecule, H2O, deprotonates (loses the nucleus of one of its hydrogen atoms) to become a hydroxide ion, OH−. The hydrogen nucleus, H+, immediately protonates another water molecule to form a hydronium cation, H3O+. It is an example of autoprotolysis, and exemplifies the amphoteric nature of water.

Sodium borate is a generic name for any salt of sodium with an anion consisting of boron and oxygen, and possibly hydrogen, or any hydrate thereof. It can be seen as a hydrated sodium salt of the appropriate boroxy acid, although the latter may not be a stable compound.

<span class="mw-page-title-main">Boron trioxide</span> Chemical compound

Boron trioxide or diboron trioxide is the oxide of boron with the formula B2O3. It is a colorless transparent solid, almost always glassy (amorphous), which can be crystallized only with great difficulty. It is also called boric oxide or boria. It has many important industrial applications, chiefly in ceramics as a flux for glazes and enamels and in the production of glasses.

<span class="mw-page-title-main">Trimethyl borate</span> Chemical compound

Trimethyl borate is the organoboron compound with the formula B(OCH3)3 and a metal alkoxide. It is a colourless liquid that burns with a green flame. It is an intermediate in the preparation of sodium borohydride and is a popular reagent in organic chemistry. It is a weak Lewis acid (AN = 23, Gutmann-Beckett method).

<span class="mw-page-title-main">Tetraborate</span>

In chemistry, tetraborate or pyroborate is an anion with formula B4O2−7; or a salt containing that anion, such as sodium tetraborate, Na2B4O7. It is one of the boron oxoacids, that is, a borate.

Sodium perborate is chemical compound whose chemical formula may be written NaH2BO4, Na2H4B2O8, or, more properly, [Na+]2[B2O4(OH)4]2−. Its name is sometimes abbreviated as PBS.

Boron trichloride is the inorganic compound with the formula BCl3. This colorless gas is a reagent in organic synthesis. It is highly reactive towards water.

<span class="mw-page-title-main">Rosocyanine</span> Chemical compound

Rosocyanine and rubrocurcumin are two red colored materials, which are formed by the reaction between curcumin and borates.

<span class="mw-page-title-main">Fluoroboric acid</span> Chemical compound

Fluoroboric acid or tetrafluoroboric acid is an inorganic compound with the simplified chemical formula H+[BF4]−. Solvent-free tetrafluoroboric acid has not been reported. The term "fluoroboric acid" usually refers to a range of compounds including hydronium tetrafluoroborate, which are available as solutions. The ethyl ether solvate is also commercially available, where the fluoroboric acid can be represented by the formula [H( 2O)n]+[BF4]−, where n is 2.

Tetrahydroxyborate is an inorganic anion with the chemical formula [BH4O4]− or [B(OH)4]−. It contributes no colour to tetrahydroxyborate salts. It is found in the mineral hexahydroborite, Ca(B(OH)4)2 · 2 H2O, originally formulated CaB2O4 · 6 H2O. It is one of the boron oxoanions, and acts as a weak base. The systematic names are tetrahydroxyboranuide (substitutive) and tetrahydroxidoborate(1−) (additive). It can be viewed as the conjugate base of boric acid.

<span class="mw-page-title-main">Disodium octaborate</span> Chemical compound

Disodium octaborate is a borate of sodium, a chemical compound of sodium, boron, and oxygen — a salt with elemental formula Na2B8O13 or (Na+)2[B8O13]2−, also written as Na2O·4B2O3. It is a colorless crystalline solid, soluble in water.

<span class="mw-page-title-main">Sodium metaborate</span> Chemical compound

Sodium metaborate is a chemical compound of sodium, boron, and oxygen with formula NaBO2. However, the metaborate ion is trimeric in the anhydrous solid, therefore a more correct formula is Na3B3O6 or (Na+)3[B3O6]3−. The formula can be written also as Na2O·B2O3 to highlight the relation to the main oxides of sodium and boron. The name is also applied to several hydrates whose formulas can be written NaBO2·nH2O for various values of n.

<span class="mw-page-title-main">Borate esters</span> Organic compounds of the form B(OR)₃ or B₃O₃(OR)₃

In organic chemistry, borate esters are organoboron compounds which are conveniently prepared by the stoichiometric condensation reaction of boric acid with alcohols. There are two main classes of borate esters: orthoborates, B(OR)3 and metaborates, B3O3(OR)3. Metaborates contain 6-membered boroxine rings.

Boron phosphate is an inorganic compound with the chemical formula BPO4. The simplest way of producing it is the reaction of phosphoric acid and boric acid. It is a white infusible solid that evaporates above 1450 °C.

Boric is a chemistry term that refers to substances containing boron, such as:

Sodium pentaborate, more properly disodium decaborate, is a chemical compound of sodium, boron, and oxygen; a salt with elemental formula NaB5O8, Na2B10O16, or Na2O·5B2O3. It is a colorless crystalline solid, soluble in water.

Trisodium borate is a chemical compound of sodium, boron, and oxygen, with formula Na3BO3, or (Na+)3[BO3]3−. It is a sodium salt of the orthoboric acid B(OH)3.

References

  1. ↑ "Boric acid".
  2. ↑ "boric_msds".
  3. ↑ Entry "boracic acid" in the online Merriamm-Webster Dictionary. Gives the first use as 1790. Retrieved 2022-06-24.
  4. ↑ Ronald Eisler (2007). Eisler's Encyclopedia of Environmentally Hazardous Priority Chemicals. Elsevier. p. 59. ISBN   978-0-08-054707-7.
  5. ↑ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1291. ISBN   978-0-08-037941-8.
  6. ↑ Andrei Rotaru (2017): "Thermal and kinetic study of hexagonal boric acid versus triclinic boric acid in air flow." Journal of Thermal Analysis and Calorimetry, volume 127, pages 755–763. doi : 10.1007/s10973-016-5583-7
  7. 1 2 3 4 5 6 Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN   978-0-08-037941-8.
  8. ↑ Gajhede, M.; Larsen, S.; Rettrup, S. (1 December 1986). "Electron density of orthoboric acid determined by X-ray diffraction at 105 K and ab initio calculations". Acta Crystallographica Section B Structural Science. 42 (6): 545–552. Bibcode:1986AcCrB..42..545G. doi:10.1107/S0108768186097720.
  9. ↑ Shuvalov, Robert R.; Burns, Peter C. (15 June 2003). "A new polytype of orthoboric acid, H 3 BO 3 -3 T". Acta Crystallographica Section C Crystal Structure Communications. 59 (6): i47–i49. Bibcode:2003AcCrC..59I..47S. doi:10.1107/S0108270103009685. PMID   12794317.
  10. ↑ Housecroft, C. E.; Sharpe, A. G. (2008). "Chapter 13: The Group 13 Elements". Inorganic Chemistry (3rd ed.). Pearson. p. 340. ISBN   978-0-13-175553-6.
  11. 1 2 3 Gurwinder Kaur, Shagun Kainth, Rohit Kumar, Piyush Sharma and O. P. Pandey (2021): "Reaction kinetics during non-isothermal solid-state synthesis of boron trioxide via boric acid dehydration." Reaction Kinetics, Mechanisms and Catalysis, volume 134, pages 347–359. doi : 10.1007/s11144-021-02084-8
  12. 1 2 3 Siavash Aghili, Masoud Panjepour, and Mahmood Meratian (2018): "Kinetic analysis of formation of boron trioxide from thermal decomposition of boric acid under non-isothermal conditions." Journal of Thermal Analysis and Calorimetry, volume 131, pages 2443–2455. doi : 10.1007/s10973-017-6740-3
  13. ↑ Balci, Suna; Sezgi, Naime; Eren, Esin (2012). "Boron Oxide Production Kinetics Using Boric Acid as Raw Material". Industrial & Engineering Chemistry Research. 51 (34): 11091–11096. doi:10.1021/ie300685x.
  14. 1 2 Jolly, W. L. (1984). Modern Inorganic Chemistry. McGraw-Hill. p. 198.
  15. ↑ Masanori Tachikawa (2004): "A density functional study on hydrated clusters of orthoboric acid, B(OH)3(H2O)n (n=1–5)". Journal of Molecular Structure: THEOCHEM, volume 710, issues 1–3, pages 139-150. doi : 10.1016/j.theochem.2004.09.008
  16. ↑ Housecroft, C.E.; Sharpe, A.G. (2005). Inorganic Chemistry (2nd ed.). Pearson Prentice-Hall. pp. 314–5.
  17. ↑ MHE. Comprehensive Chemistry for JEE Advanced 2014. Tata McGraw-Hill Education. p. 15.5. ISBN   978-1-259-06426-5 – via Google Books.
  18. ↑ Darpan, Pratiyogita (1 May 2000). Competition Science Vision. Pratiyogita Darpan – via Internet Archive.
  19. ↑ Tsuyumoto, I.; Oshio, T.; Katayama, K. (2007). "Preparation of highly concentrated aqueous solution of sodium borate". Inorganic Chemistry Communications. 10 (1): 20–22. doi:10.1016/j.inoche.2006.08.019.
  20. ↑ Brown, Herbert C.; Mead, Edward J.; Shoaf, Charles J. (1956). "Convenient procedures for the preparation of alkyl borate esters". J. Am. Chem. Soc. 78 (15): 3613–3614. doi:10.1021/ja01596a015.
  21. 1 2 Mendham, J.; Denney, R. C.; Barnes, J. D.; Thomas, M. J. K. (2000), Vogel's Quantitative Chemical Analysis (6th ed.), New York: Prentice Hall, p. 357, ISBN   0-582-22628-7
  22. 1 2 NIST Special Publication. U.S. Government Printing Office. 1969.
  23. ↑ "Toxicological Profile for Boron" (PDF). Centers for Disease Control. November 2010. p. 11.
  24. ↑ "Report of the Food Quality Protection Act (FQPA) Tolerance Reassessment Eligibility Decision (TRED) for Boric Acid/Sodium Borate Salts" (PDF). United States Environmental Protection Agency. 2006. Archived from the original (PDF) on 6 October 2006. Retrieved 21 April 2008.
  25. ↑ "CLH report for boric acid – Proposal for Harmonised Classification and Labelling". Lodz, Poland: Bureau for Chemical Substances. 23 April 2018. Retrieved 18 October 2018.
  26. ↑ "Boric acid, ACC# 03260 MSDS" (PDF). 11 February 2008. Archived from the original (PDF) on 16 December 2011. Retrieved 24 September 2009.
  27. ↑ Ishii, Y.; Fujizuka, N.; Takahashi, T.; et al. (1993). "A fatal case of acute boric acid poisoning". Clinical Toxicology. 31 (2): 345–352. doi:10.3109/15563659309000402. PMID   8492348.
  28. ↑ Restuccio, A.; Mortensen, M. E.; Kelley, M. T. (1992). "Fatal ingestion of boric acid in an adult". American Journal of Emergency Medicine. 10 (6): 545–547. doi:10.1016/0735-6757(92)90180-6. PMID   1388380.
  29. ↑ Duldner, J. E. (30 January 2009). "Boric acid poisoning". A.D.A.M. Medical Encyclopedia. MedLine Plus.
  30. ↑ NSW Food Authority. "Borax and boric acid". Australia: New South Wales Government. Archived from the original on 15 October 2009. Retrieved 24 September 2009.
  31. ↑ "Boric acid as a substance of very high concern because of its CMR properties" (PDF). ECHA Document library. Archived from the original (PDF) on 18 May 2016. Retrieved 28 May 2017.
  32. ↑ Regulation (EC) No 1272/2008 of the European Parliament and of the Council, 16 December 2008
  33. ↑ Kistler, R. B.; Helvaci, C. (1994). "Boron and Borates". In Carr, D. D. (ed.). Industrial Minerals and Rocks (6th ed.). Littleton, CO: SME. pp. 171–186.
  34. ↑ Hettmansperger, Mary (2008). Wrap, Stitch, Fold & Rivet: Making Designer Metal Jewelry. Lark Books. ISBN   978-1-60059-125-9.
  35. ↑ Lewton-Brain, Charles. "Dealing with Fire Scale". Ganoksin Jewelry Making Resources. Retrieved 20 June 2024.
  36. ↑ "Technical Bulletin: Borates in glasses" (PDF). Borax. 2021.
  37. ↑ "Boron Flat Panel Displays". Borates Today. 9 February 2022.
  38. ↑ Tsuyumoto, I.; Oshio, T. (2009). "Development of fire resistant laminated wood using concentrated sodium polyborate aqueous solution". Journal of Wood Chemistry and Technology. 29 (4): 277–285. doi:10.1080/02773810903033721. S2CID   98730912.
  39. ↑ Dempsey, Jock (2009) [1998]. "Borax". Dempsey's Forge. Retrieved 23 July 2010.
  40. ↑ Prager, Felice. "Science Becomes a Toy – Silly Putty". Loti.com. Rewind the Fifites. Archived from the original on 12 May 2013. Retrieved 7 June 2013.
  41. ↑ "Chemicals used by hydraulic fracturing companies in pennsylvania for surface and hydraulic fracturing activities" (PDF). Pennsylvania Department of Environmental Protection, Bureau of Oil and Gas Management. 30 June 2010.
  42. ↑ Fink, Johannes (2015). "Fracturing fluids". Petroleum Engineer's Guide to Oil Field Chemicals and Fluids. pp. 567–651. doi:10.1016/B978-0-12-803734-8.00017-5. ISBN   978-0-12-803734-8.
  43. ↑ Bishop, Maximilienne; Shahid, Naureen; Yang, Jianzhong; Barron, Andrew R. (2004). "Determination of the mode and efficacy of the cross-linking of guar by borate using MAS11B NMR of borate cross-linked guar in combination with solution11B NMR of model systems". Dalton Trans. (17): 2621–2634. doi:10.1039/B406952H. ISSN   1477-9226. PMID   15514744.
  44. ↑ "European Patent EP3004279A1. Concentrated borate crosslinking solutions for use in hydraulic fracturing operations". European Patent Office. Retrieved 27 October 2019.
  45. ↑ Wang, Shibin; Tang, Hongbiao; Guo, Jianchun; Wang, Kunjie (2016). "Effect of pH on the rheological properties of borate crosslinked hydroxypropyl guar gum hydrogel and hydroxypropyl guar gum". Carbohydrate Polymers. 147: 455–463. doi:10.1016/j.carbpol.2016.04.029. ISSN   0144-8617. PMID   27178952.
  46. ↑ Electrical Sector Solutions Product Overview (PDF). Vol. 14: Fuses. Eaton Corporation. 2011.
  47. ↑ Strom, A. P.; Rawlins, H. L. (December 1932). "The Boric Acid Fuse". Transactions of the American Institute of Electrical Engineers. 51 (4): 1020–1025. doi:10.1109/T-AIEE.1932.5056215. ISSN   0096-3860. S2CID   51650608.
  48. 1 2 Iavazzo C, Gkegkes ID, Zarkada IM, Falagas ME (August 2011). "Boric acid for recurrent vulvovaginal candidiasis: the clinical evidence". J Womens Health (Larchmt). 20 (8): 1245–55. doi:10.1089/jwh.2010.2708. PMID   21774671.
  49. ↑ Abercrombie, P. (2010). "Vaginitis". In Maizes, V.; Low Dog, T. (eds.). Integrative Women's Health. New York, NY: Oxford University Press. p. 192. doi:10.1093/med/9780190214791.003.0013. ISBN   978-0-19-537881-8.
  50. ↑ Sobel JD, Sobel R (August 2021). "Current and emerging pharmacotherapy for recurrent bacterial vaginosis". Expert Opin Pharmacother. 22 (12): 1593–1600. doi:10.1080/14656566.2021.1904890. PMID   33750246. S2CID   232325625.
  51. ↑ "TOL 463 – AdisInsight".
  52. ↑ Nyirjesy P, Brookhart C, Lazenby G, Schwebke J, Sobel JD (April 2022). "Vulvovaginal Candidiasis: A Review of the Evidence for the 2021 Centers for Disease Control and Prevention of Sexually Transmitted Infections Treatment Guidelines". Clin Infect Dis. 74 (Suppl_2): S162–S168. doi:10.1093/cid/ciab1057. PMID   35416967.
  53. ↑ Marrazzo JM, Dombrowski JC, Wierzbicki MR, Perlowski C, Pontius A, Dithmer D, Schwebke J (February 2019). "Safety and Efficacy of a Novel Vaginal Anti-infective, TOL-463, in the Treatment of Bacterial Vaginosis and Vulvovaginal Candidiasis: A Randomized, Single-blind, Phase 2, Controlled Trial". Clin Infect Dis. 68 (5): 803–809. doi:10.1093/cid/ciy554. PMC   6376090 . PMID   30184181.
  54. ↑ Adriztina, I.; Adenin, L. I.; Lubis, Y. M. (January 2018). "Efficacy of Boric Acid as a Treatment of Choice for Chronic Suppurative Otitis Media and Its Ototoxicity". Korean J Fam Med. 39 (1): 2–9. doi:10.4082/kjfm.2018.39.1.2. PMC   5788841 . PMID   29383205.
  55. ↑ UK standards for microbiology investigations (PDF). Public Health England. 7 August 2017.
  56. ↑ Harvey, S. C. (1980). "Antiseptics and Disinfectants; Fungicides; Ectoparasiticides". In Gilman, A. G.; Goodman, L. S.; Gilman, A. (eds.). Goodman & Gillman's The Pharmacological Basis of Therapeutics (6th ed.). Macmillan. p.  971. ISBN   978-0-02-344720-4.
  57. ↑ "Method 3052 microwave assisted acid digestion of siliceous and organically based matrices" (PDF). US EPA. 22 June 2015.
  58. ↑ "Borates in Pesticides | AMERICAN BORATE COMPANY".
  59. ↑ Boone, C.; Bond, C.; Stone, D. (2012). "Boric Acid General Fact Sheet". National Pesticide Information Center, Oregon State University Extension Services.
  60. ↑ "R.E.D. Facts – Boric Acid" (PDF). United States Environmental Protection Agency. Archived (PDF) from the original on 23 December 2021. Retrieved 2 April 2022.
  61. ↑ Ashbrook, Aaron R.; Schwarz, Melbert; Schal, Coby; Mikaelyan, Aram (2024). "Lethal disruption of the bacterial gut community in Eastern subterranean termite caused by boric acid". Journal of Economic Entomology. doi: 10.1093/jee/toae221 . PMID   39401329 . Retrieved 21 October 2024.
  62. ↑ Birch, Robert G (2013). "Boric acid as a swimming pool buffer" (PDF). The University of Queensland. Retrieved 30 November 2013.
  63. ↑ Düzcükoğlu, H.; Acaroğlu, M. (2009). "Lubrication Properties of Vegetable Oils Combined with Boric Acid and Determination of Their Effects on Wear". Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 32 (3): 275–285. doi:10.1080/15567030802606053. S2CID   97537085.
  64. ↑ Singh, Harpreet. "Standard equipments". Punjab State Carrom Association. Archived from the original on 14 March 2007. Retrieved 24 September 2009.
  65. ↑ Weingart, George (1947). Pyrotechnics. Chemical Publishing Company. ISBN   978-0-8206-0112-0.
  66. ↑ "Use of Boric Acid and Borax in Food". cfs.gov.hk. Retrieved 22 May 2019.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.