Carbon-neutral fuel

Last updated

Carbon-neutral fuel is fuel which produces no net-greenhouse gas emissions or carbon footprint. In practice, this usually means fuels that are made using carbon dioxide (CO2) as a feedstock. Proposed carbon-neutral fuels can broadly be grouped into synthetic fuels, which are made by chemically hydrogenating carbon dioxide, and biofuels, which are produced using natural CO2-consuming processes like photosynthesis. [1]

Contents

The carbon dioxide used to make synthetic fuels may be directly captured from the air, recycled from power plant flue exhaust gas or derived from carbonic acid in seawater. Common examples of synthetic fuels include ammonia and methane, [2] although more complex hydrocarbons such as gasoline and jet fuel [3] have also been successfully synthesized artificially. In addition to being carbon neutral, such renewable fuels can alleviate the costs and dependency issues of imported fossil fuels without requiring either electrification of the vehicle fleet or conversion to hydrogen or other fuels, enabling continued compatible and affordable vehicles. [4] In order to be truly carbon-neutral, any energy required for the process must be itself be carbon-neutral or emissions-free, like renewable energy or nuclear energy. [5] [6] [7] [8]

If the combustion of carbon-neutral fuels is subject to carbon capture at the flue, they result in net-negative carbon dioxide emission and may thus constitute a form of greenhouse gas remediation. Negative emissions are widely considered an indispensable component of efforts to limit global warming, although negative emissions technologies are currently not economically viable for private sector companies. [9] Carbon credits are likely to play an important role for carbon-negative fuels. [10]

Production of synthetic hydrocarbons

Synthetic hydrocarbons can be produced in chemical reactions between carbon dioxide, which can be captured from power plants or the air, and hydrogen. The fuel, often referred to as electrofuel, stores the energy that was used in the production of the hydrogen. [11]

Hydrogen fuel is typically prepared by the electrolysis of water in a power to gas process. To minimize emissions, the electricity is produced using a low-emission energy source such as wind, solar, or nuclear power. [12]

Through the Sabatier reaction methane can then be produced which may then be stored to be burned later in power plants (as a synthetic natural gas), transported by pipeline, truck, or tanker ship, or be used in gas to liquids processes such as the Fischer–Tropsch process to make traditional fuels for transportation or heating. [4] [13] [14]

There are a few more fuels that can be created using hydrogen. Formic acid for example can be made by reacting the hydrogen with CO2. Formic acid combined with CO2 can form isobutanol. [15]

Methanol can be made from a chemical reaction of a carbon-dioxide molecule with three hydrogen molecules to produce methanol and water. The stored energy can be recovered by burning the methanol in a combustion engine, releasing carbon dioxide, water, and heat. Methane can be produced in a similar reaction. Special precautions against methane leaks are important since methane is nearly 100 times as potent as CO2, regarding the 20-year global warming potential. More energy can be used to combine methanol or methane into larger hydrocarbon fuel molecules. [4]

Researchers have also suggested using methanol to produce dimethyl ether. This fuel could be used as a substitute for diesel fuel due to its ability to self ignite under high pressure and temperature. It is already being used in some areas for heating and energy generation. It is nontoxic, but must be stored under pressure. [16] Larger hydrocarbons [17] and ethanol [18] can also be produced from carbon dioxide and hydrogen.

All synthetic hydrocarbons are generally produced at temperatures of 200–300 °C, and at pressures of 20 to 50 bar. Catalysts are usually used to improve the efficiency of the reaction and create the desired type of hydrocarbon fuel. Such reactions are exothermic and use about 3 mol of hydrogen per mole of carbon dioxide involved. They also produce large amounts of water as a byproduct. [5]

Sources of carbon for recycling

The most economical source of carbon for recycling into fuel is flue-gas emissions from fossil-fuel combustion where it can be obtained for about US$7.50 per ton. [7] [19] [13] However, this is not carbon-neutral, since the carbon is of fossil origin, therefore moving carbon from the geosphere to the atmosphere. Since carbonic acid in seawater is in chemical equilibrium with atmospheric carbon dioxide, extraction of carbon from seawater has been studied. [20] [21] Researchers have estimated that carbon extraction from seawater would cost about $50 per ton. [8] Carbon capture from ambient air is more costly, at between $94 and $232 per ton and is considered impractical for fuel synthesis or carbon sequestration. [22] Direct air capture is less developed than other methods. Proposals for this method involve using a caustic chemical to react with carbon dioxide in the air to produce carbonates. These can then be broken down and hydrated to release pure CO2 gas and regenerate the caustic chemical. This process requires more energy than other methods because carbon dioxide is at much lower concentrations in the atmosphere than in other sources. [4]

Researchers have also suggested using biomass as a carbon source for fuel production. Adding hydrogen to the biomass would reduce its carbon to produce fuel. This method has the advantage of using plant matter to cheaply capture carbon dioxide. The plants also add some chemical energy to the fuel from biological molecules. This may be a more efficient use of biomass than conventional biofuel because it uses most of the carbon and chemical energy from the biomass instead of releasing as much energy and carbon. Its main disadvantage is, as with conventional ethanol production, it competes with food production. [5]

Renewable and nuclear energy costs

Nighttime wind power is considered the most economical form of electrical power with which to synthesize fuel, because the load curve for electricity peaks sharply during the warmest hours of the day, but wind tends to blow slightly more at night than during the day. Therefore, the price of nighttime wind power is often much less expensive than any alternative. Off-peak wind power prices in high wind penetration areas of the U.S. averaged 1.64 cents per kilowatt-hour in 2009, but only 0.71 cents/kWh during the least expensive six hours of the day. [4] Typically, wholesale electricity costs 2 to 5 cents/kWh during the day. [23] Commercial fuel synthesis companies suggest they can produce gasoline for less than petroleum fuels when oil costs more than $55 per barrel. [24]

In 2010, a team of process chemists led by Heather Willauer of the U.S. Navy, estimates that 100 megawatts of electricity can produce 160 cubic metres (41,000 US gal) of jet fuel per day and shipboard production from nuclear power would cost about $1,600 per cubic metre ($6/US gal). While that was about twice the petroleum fuel cost in 2010, it is expected to be much less than the market price in less than five years if recent trends continue.[ needs update ] Moreover, since the delivery of fuel to a carrier battle group costs about $2,100 per cubic metre ($8/US gal), shipboard production is already much less expensive. [25]

Willauer said seawater is the "best option" for a source of synthetic jet fuel. [26] [27] By April 2014, Willauer's team had not yet made fuel to the standard required by military jets, [28] [29] but they were able in September 2013 to use the fuel to fly a radio-controlled model airplane powered by a common two-stroke internal combustion engine. [30] Because the process requires a large input of electrical energy, a plausible first step of implementation would be for American nuclear-powered aircraft carriers (the Nimitz-class and the Gerald R. Ford-class) to manufacture their own jet fuel. [31] The U.S. Navy is expected to deploy the technology some time in the 2020s. [26]

In 2023, a study published by the NATO Energy Security Centre of Excellence, concluded that e-fuels offer one of the most promising decarbonization pathways for military mobility across the land, sea and air domains. [32]

Demonstration projects and commercial development

A 250 kilowatt methane synthesis plant was constructed by the Center for Solar Energy and Hydrogen Research (ZSW) at Baden-Württemberg and the Fraunhofer Society in Germany and began operating in 2010. It is being upgraded to 10 megawatts, scheduled for completion in autumn 2012. [33] [34]

The George Olah carbon dioxide recycling plant operated by Carbon Recycling International in Grindavík, Iceland, has been producing 2 million liters of methanol transportation fuel per year from flue exhaust of the Svartsengi Power Station since 2011. [35] It has the capacity to produce 5 million liters per year. [36]

Audi has constructed a carbon-neutral liquefied natural gas (LNG) plant in Werlte, Germany. [37] The plant is intended to produce transportation fuel to offset LNG used in their A3 Sportback g-tron automobiles, and can keep 2,800 metric tons of CO2 out of the environment per year at its initial capacity. [38]

Zero, a British-based company set up by former F1 engineer Paddy Lowe, has developed a process it terms 'petrosynthesis' to develop synthetic fuels from atmospheric carbon dioxide and water using renewable energy. In 2022 it began work on a demonstration production plant [39] at Bicester Heritage near Oxford.

Commercial developments are taking place in Columbia, South Carolina, [40] Camarillo, California, [41] and Darlington, England. [42] A demonstration project in Berkeley, California, proposes synthesizing both fuels and food oils from recovered flue gases. [43]

Greenhouse gas remediation

Carbon-neutral fuels can lead to greenhouse gas remediation because carbon dioxide gas would be reused to produce fuel instead of being released into the atmosphere. Capturing the carbon dioxide in flue gas emissions from power plants would eliminate their greenhouse gas emissions, although burning the fuel in vehicles would release that carbon because there is no economical way to capture those emissions. [4] This approach would reduce net carbon dioxide emission by about 50% if it were used on all fossil fuel power plants. Most coal and natural gas power plants have been predicted to be economically retrofittable with carbon dioxide scrubbers for carbon capture to recycle flue exhaust or for carbon sequestration. [44] [19] [45] Such recycling is expected to not only cost less than the excess economic impacts of climate change if it were not done, but also to pay for itself as global fuel demand growth and peak oil shortages increase the price of petroleum and fungible natural gas. [46] [47]

Capturing CO2 directly from the air, known as direct air capture, or extracting carbonic acid from seawater would also reduce the amount of carbon dioxide in the environment, and create a closed cycle of carbon to eliminate new carbon dioxide emissions. [5] Use of these methods would eliminate the need for fossil fuels entirely, assuming that enough renewable energy could be generated to produce the fuel. Using synthetic hydrocarbons to produce synthetic materials such as plastics could result in permanent sequestration of carbon from the atmosphere. [4]

Technologies

Traditional fuels, methanol or ethanol

Some authorities have recommended producing methanol instead of traditional transportation fuels. It is a liquid at normal temperatures and can be toxic if ingested. Methanol has a higher octane rating than gasoline but a lower energy density, and can be mixed with other fuels or used on its own. It may also be used in the production of more complex hydrocarbons and polymers. Direct methanol fuel cells have been developed by Caltech's Jet Propulsion Laboratory to convert methanol and oxygen into electricity. [16] It is possible to convert methanol into gasoline, jet fuel or other hydrocarbons, but that requires additional energy and more complex production facilities. [4] Methanol is slightly more corrosive than traditional fuels, requiring automobile modifications on the order of US$100 each to use it. [5] [48]

In 2016, a method using carbon spikes, copper nanoparticles and nitrogen that converts carbon dioxide to ethanol was developed. [49]

Microalgae

Fuel made from microalgae could potentially have a low carbon footprint and is an active area of research, although no large-scale production system has been commercialized to date. Microalgae are aquatic unicellular organisms. Although they, unlike most plants, have extremely simple cell structures, they are still photoautotrophic, able to use solar energy to convert carbon dioxide into carbohydrates and fats via photosynthesis. These compounds can serve as raw materials for biofuels like bioethanol or biodiesel. [50] Therefore, even though combusting microalgae-based fuel for energy would still produce emissions like any other fuel, it could be close to carbon-neutral if they, as a whole, consumed as much carbon dioxide as is emitted during combustion.

The advantages of microalgae are their higher CO2-fixation efficiency compared to most plants [51] and their ability to thrive in a wide variety of aquatic habitats. [52] Their main disadvantage is their high cost. It has been argued that their unique and highly variable chemical compositions may make it attractive for specific applications. [50]

Microalgae also can be used as livestock feed due to their proteins. Even more, some species of microalgae produce valuable compounds such as pigments and pharmaceuticals. [53]

Production

Raceway pond used for the cultivation of microalgae. The water is kept in constant motion with a powered paddle wheel. Microalgenkwekerij te Heure bij Borculo.jpg
Raceway pond used for the cultivation of microalgae. The water is kept in constant motion with a powered paddle wheel.

Two main ways of cultivating microalgae are raceway pond systems and photo-bioreactors. Raceway pond systems are constructed by a closed loop oval channel that has a paddle wheel to circulate water and prevent sedimentation. The channel is open to the air and its depth is in the range of 0.25–0.4 m (0.82–1.31 ft). [50] The pond needs to be kept shallow since self-shading and optical absorption can cause the limitation of light penetration through the solution of algae broth. PBRs's culture medium is constructed by closed transparent array of tubes. It has a central reservoir which circulated the microalgae broth. PBRs is an easier system to be controlled compare to the raceway pond system, yet it costs a larger overall production expenses.[ citation needed ]

The carbon emissions from microalgae biomass produced in raceway ponds could be compared to the emissions from conventional biodiesel by having inputs of energy and nutrients as carbon-intensive. The corresponding emissions from microalgae biomass produced in PBRs could also be compared and might even exceed the emissions from conventional fossil diesel. The inefficiency is due to the amount of electricity used to pump the algae broth around the system. Using co-product to generate electricity is one strategy that might improve the overall carbon balance. Another thing that needs to be acknowledged is that environmental impacts can also come from water management, carbon dioxide handling, and nutrient supply, several aspects that could constrain system design and implementation options. But, in general, Raceway Pond systems demonstrate a more attractive energy balance than PBR systems.[ citation needed ]

Economy

Production cost of microalgae-biofuel through implementation of raceway pond systems is dominated by the operational cost which includes labour, raw materials, and utilities. In raceway pond system, during the cultivation process, electricity takes up the largest energy fraction of total operational energy requirements. It is used to circulate the microalgae cultures. It takes up an energy fraction ranging from 22% to 79%. [50] In contrast, capital cost dominates the cost of production of microalgae-biofuel in PBRs. This system has a high installation cost though the operational cost is relatively lower than raceway pond systems.[ citation needed ]

Microalgae-biofuel production costs a larger amount of money compared to fossil fuel production. The cost estimation of producing microalgae-biofuel is around $3.1 per litre ($11.57/US gal), [54] which is considerably more expensive than conventional gasoline. However, when compared with electrification of the vehicle fleet - a key advantage of such biofuel is the avoidance of the costly distribution of large amounts of electrical energy (as is required to convert existing vehicle fleets to battery electric technology), therein allowing for the re-use of the existing liquid-fuel transportation infrastructure. Biofuel such as ethanol is also greatly more energy dense than current battery technologies (approximately 6x as much [55] ) further promoting its economic viability.

Environmental impact

The construction of large-scale microalgae cultivation facilities would inevitably result in negative environmental impacts related to land use change, such as the destruction of existing natural habitats. Microalgae can also under certain conditions emit greenhouse gases, like methane or nitrous oxide, or foul-smelling gases, like hydrogen sulfide, although this has not been widely studied to date. If poorly managed, toxins naturally produced by microalgae may leak into the surrounding soil or ground water. [56]

Production

Water undergoes electrolysis at high temperatures to form hydrogen gas and oxygen gas. The energy to perform this is extracted from renewable sources such as wind power. Then, the hydrogen is reacted with compressed carbon dioxide captured by direct air capture. The reaction produces blue crude which consists of hydrocarbon. The blue crude is then refined to produce high efficiency E-diesel. [57] [58] This method is, however, still debatable because with the current production capability it can only produce 3,000 liters in a few months, 0.0002% of the daily production of fuel in the US. [59] Furthermore, the thermodynamic and economic feasibility of this technology have been questioned. An article suggests that this technology does not create an alternative to fossil fuel but rather converting renewable energy into liquid fuel. The article also states that the energy return on energy invested using fossil diesel is 18 times higher than that for e-diesel. [60]

History

Investigation of carbon-neutral fuels has been ongoing for decades. A 1965 report suggested synthesizing methanol from carbon dioxide in air using nuclear power for a mobile fuel depot. [61] Shipboard production of synthetic fuel using nuclear power was studied in 1977 and 1995. [62] [63] [64] A 1984 report studied the recovery of carbon dioxide from fossil fuel plants. [65] A 1995 report compared converting vehicle fleets for the use of carbon-neutral methanol with the further synthesis of gasoline. [48]

See also

Related Research Articles

<span class="mw-page-title-main">Biofuel</span> Type of biological fuel produced from biomass from which energy is derived

Biofuel is a fuel that is produced over a short time span from biomass, rather than by the very slow natural processes involved in the formation of fossil fuels, such as oil. Biofuel can be produced from plants or from agricultural, domestic or industrial biowaste. Biofuels are mostly used for transportation, but can also be used for heating and electricity. Biofuels are regarded as a renewable energy source. The use of biofuel has been subject to criticism regarding the "food vs fuel" debate, sustainability, deforestation, loss of biodiversity, etc.

Syngas, or synthesis gas, is a mixture of hydrogen and carbon monoxide, in various ratios. The gas often contains some carbon dioxide and methane. It is principally used for producing ammonia or methanol. Syngas is combustible and can be used as a fuel. Historically, it has been used as a replacement for gasoline, when gasoline supply has been limited; for example, wood gas was used to power cars in Europe during WWII.

<span class="mw-page-title-main">Gasification</span> Form of energy conversion

Gasification is a process that converts biomass- or fossil fuel-based carbonaceous materials into gases, including as the largest fractions: nitrogen (N2), carbon monoxide (CO), hydrogen (H2), and carbon dioxide (CO2). This is achieved by reacting the feedstock material at high temperatures (typically >700 °C), without combustion, via controlling the amount of oxygen and/or steam present in the reaction. The resulting gas mixture is called syngas (from synthesis gas) or producer gas and is itself a fuel due to the flammability of the H2 and CO of which the gas is largely composed. Power can be derived from the subsequent combustion of the resultant gas, and is considered to be a source of renewable energy if the gasified compounds were obtained from biomass feedstock.

<span class="mw-page-title-main">Alternative fuel</span> Fuels from sources other than fossil fuels

Alternative fuels, also known as non-conventional and advanced fuels, are fuels derived from sources other than petroleum. Alternative fuels include gaseous fossil fuels like propane, natural gas, methane, and ammonia; biofuels like biodiesel, bioalcohol, and refuse-derived fuel; and other renewable fuels like hydrogen and electricity.

<span class="mw-page-title-main">Fossil fuel power station</span> Facility that burns fossil fuels to produce electricity

A fossil fuel power station is a thermal power station which burns a fossil fuel, such as coal or natural gas, to produce electricity. Fossil fuel power stations have machinery to convert the heat energy of combustion into mechanical energy, which then operates an electrical generator. The prime mover may be a steam turbine, a gas turbine or, in small plants, a reciprocating gas engine. All plants use the energy extracted from the expansion of a hot gas, either steam or combustion gases. Although different energy conversion methods exist, all thermal power station conversion methods have their efficiency limited by the Carnot efficiency and therefore produce waste heat.

<span class="mw-page-title-main">Methanol economy</span>

The methanol economy is a suggested future economy in which methanol and dimethyl ether replace fossil fuels as a means of energy storage, ground transportation fuel, and raw material for synthetic hydrocarbons and their products. It offers an alternative to the proposed hydrogen economy or ethanol economy, although these concepts are not exclusive. Methanol can be produced from a variety of sources including fossil fuels as well as agricultural products and municipal waste, wood and varied biomass. It can also be made from chemical recycling of carbon dioxide.

Coal liquefaction is a process of converting coal into liquid hydrocarbons: liquid fuels and petrochemicals. This process is often known as "Coal to X" or "Carbon to X", where X can be many different hydrocarbon-based products. However, the most common process chain is "Coal to Liquid Fuels" (CTL).

<span class="mw-page-title-main">Synthetic fuel</span> Fuel from carbon monoxide and hydrogen

Synthetic fuel or synfuel is a liquid fuel, or sometimes gaseous fuel, obtained from syngas, a mixture of carbon monoxide and hydrogen, in which the syngas was derived from gasification of solid feedstocks such as coal or biomass or by reforming of natural gas.

<span class="mw-page-title-main">Biomass to liquid</span>

Biomass to liquid is a multi-step process of producing synthetic hydrocarbon fuels made from biomass via a thermochemical route.

<span class="mw-page-title-main">Waste-to-energy</span> Process of generating energy from the primary treatment of waste

Waste-to-energy (WtE) or energy-from-waste (EfW) is the process of generating energy in the form of electricity and/or heat from the primary treatment of waste, or the processing of waste into a fuel source. WtE is a form of energy recovery. Most WtE processes generate electricity and/or heat directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels, often derived from the product syngas.

Hydrogen gas is produced by several industrial methods. Fossil fuels are the dominant source of hydrogen. As of 2020, the majority of hydrogen (~95%) is produced by steam reforming of natural gas and other light hydrocarbons, and partial oxidation of heavier hydrocarbons. Other methods of hydrogen production include biomass gasification and methane pyrolysis. Methane pyrolysis and water electrolysis can use any source of electricity including renewable energy.

Renewable Fuels are fuels produced from renewable resources. Examples include: biofuels, Hydrogen fuel, and fully synthetic fuel produced from ambient carbon dioxide and water. This is in contrast to non-renewable fuels such as natural gas, LPG (propane), petroleum and other fossil fuels and nuclear energy. Renewable fuels can include fuels that are synthesized from renewable energy sources, such as wind and solar. Renewable fuels have gained in popularity due to their sustainability, low contributions to the carbon cycle, and in some cases lower amounts of greenhouse gases. The geo-political ramifications of these fuels are also of interest, particularly to industrialized economies which desire independence from Middle Eastern oil.

<span class="mw-page-title-main">Algae fuel</span> Use of algae as a source of energy-rich oils

Algae fuel, algal biofuel, or algal oil is an alternative to liquid fossil fuels that uses algae as its source of energy-rich oils. Also, algae fuels are an alternative to commonly known biofuel sources, such as corn and sugarcane. When made from seaweed (macroalgae) it can be known as seaweed fuel or seaweed oil.

<span class="mw-page-title-main">Bioenergy with carbon capture and storage</span>

Bioenergy with carbon capture and storage (BECCS) is the process of extracting bioenergy from biomass and capturing and storing the carbon, thereby removing it from the atmosphere. BECCS can theoretically be a "negative emissions technology" (NET), although its deployment at the scale considered by many governments and industries can "also pose major economic, technological, and social feasibility challenges; threaten food security and human rights; and risk overstepping multiple planetary boundaries, with potentially irreversible consequences". The carbon in the biomass comes from the greenhouse gas carbon dioxide (CO2) which is extracted from the atmosphere by the biomass when it grows. Energy ("bioenergy") is extracted in useful forms (electricity, heat, biofuels, etc.) as the biomass is utilized through combustion, fermentation, pyrolysis or other conversion methods.

<span class="mw-page-title-main">Electrofuel</span> Carbon-neutral drop-in replacement fuel

Electrofuels, also known as e-fuels, a class of synthetic fuels, are a type of drop-in replacement fuel. They are manufactured using captured carbon dioxide or carbon monoxide, together with hydrogen obtained from water split by sustainable electricity sources such as wind, solar and nuclear power.

Carbon Recycling International (CRI) is an Icelandic limited liability company which has developed a technology designed to produce renewable methanol from carbon dioxide and hydrogen, using water electrolysis or, alternatively, hydrogen captured from industrial waste gases. The technology is trademarked by CRI as Emissions-to-Liquids (ETL) and the renewable methanol produced by CRI is trademarked as Vulcanol. In 2011 CRI became the first company to produce and sell liquid renewable transport fuel produced using only carbon dioxide, water and electricity from renewable sources.

Power-to-gas is a technology that uses electric power to produce a gaseous fuel. When using surplus power from wind generation, the concept is sometimes called windgas.

E-diesel is a synthetic diesel fuel created by Audi for use in automobiles. Currently, e-diesel is created by an Audi research facility in partnership with a company named Sunfire. The fuel is created from carbon dioxide, water, and electricity with a process powered by renewable energy sources to create a liquid energy carrier called blue crude which is then refined to generate e-diesel. E-diesel is considered to be a carbon-neutral fuel as it does not extract new carbon and the energy sources to drive the process are from carbon-neutral sources. As of April 2015, an Audi A8 driven by Federal Minister of Education and Research in Germany is using the e-diesel fuel.

<span class="mw-page-title-main">Carbon capture and utilization</span>

Carbon capture and utilization (CCU) is the process of capturing carbon dioxide (CO2) from industrial processes and transporting it via pipelines to where one intends to use it in industrial processes.

Carbon tech is a group of existing and emerging technologies that are rapidly transforming oil and gas to low emissions energy. Combined, these technologies take a circular carbon economy approach for managing and reducing carbon footprints, while optimizing biological and industry processes. It builds on the principles of the circular economy for managing carbon emissions: to reduce the amount of carbon emissions entering the atmosphere, to reuse carbon emissions as a feedstock in different industries, to recycle carbon through the natural carbon cycle with bioenergy, and to remove carbon and store it. Carbon tech provides a third option for climate and environmental policy as an alternate to the binary business as usual and radical change.

References

Books and reports

Notes

  1. Trakimavičius, Lukas (October 6, 2021). "Synthetic fuels can bolster energy security in the Baltic region". EurActiv. Archived from the original on October 6, 2021. Retrieved October 12, 2021.
  2. Leighty and Holbrook (2012) "Running the World on Renewables: Alternatives for Trannd Low-cost Firming Storage of Stranded Renewable as Hydrogen and Ammonia Fuels via Underground Pipelines" Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition November 9–15, 2012, Houston, Texas
  3. "Air Fuel Synthesis shows petrol from air has future". Archived from the original on 2019-06-05. Retrieved 2019-06-05.
  4. 1 2 3 4 5 6 7 8 Pearson, R.J.; Eisaman, M.D.; et al. (2012). "Energy Storage via Carbon-Neutral Fuels Made From CO2, Water, and Renewable Energy" (PDF). Proceedings of the IEEE. 100 (2): 440–60. CiteSeerX   10.1.1.359.8746 . doi:10.1109/JPROC.2011.2168369. S2CID   3560886. Archived from the original (PDF) on May 8, 2013. Retrieved September 7, 2012. (Review.)
  5. 1 2 3 4 5 Zeman, Frank S.; Keith, David W. (2008). "Carbon neutral hydrocarbons" (PDF). Philosophical Transactions of the Royal Society A . 366 (1882): 3901–18. Bibcode:2008RSPTA.366.3901Z. doi:10.1098/rsta.2008.0143. PMID   18757281. S2CID   2055798. Archived from the original (PDF) on May 25, 2013. Retrieved September 7, 2012. (Review.)
  6. Wang, Wei; Wang, Shengping; Ma, Xinbin; Gong, Jinlong (2011). "Recent advances in catalytic hydrogenation of carbon dioxide". Chemical Society Reviews. 40 (7): 3703–27. CiteSeerX   10.1.1.666.7435 . doi:10.1039/C1CS15008A. PMID   21505692. (Review.)
  7. 1 2 MacDowell, Niall; et al. (2010). "An overview of CO2 capture technologies" (PDF). Energy and Environmental Science. 3 (11): 1645–69. doi:10.1039/C004106H. Archived (PDF) from the original on 2015-12-11. Retrieved 2019-07-16. (Review.)
  8. 1 2 Eisaman, Matthew D.; et al. (2012). "CO2 extraction from seawater using bipolar membrane electrodialysis". Energy and Environmental Science. 5 (6): 7346–52. CiteSeerX   10.1.1.698.8497 . doi:10.1039/C2EE03393C. Archived from the original on November 23, 2021. Retrieved July 6, 2013.
  9. McKie, Robin (2021-01-16). "Carbon capture is vital to meeting climate goals, scientists tell green critics". The Guardian. Archived from the original on 2021-04-30. Retrieved 2021-04-28.
  10. Mathews, John A. (March 2008). "Carbon-negative biofuels; 6:The role of carbon credits". Energy Policy. 36 (3): 940–945. doi:10.1016/j.enpol.2007.11.029.
  11. Pearson, Richard; Eisaman (2011). "Energy Storage Via Carbon-Neutral Fuels Made From Carbon dioxide, Water, and Renewable Energy" (PDF). Proceedings of the IEEE. 100 (2): 440–460. CiteSeerX   10.1.1.359.8746 . doi:10.1109/jproc.2011.2168369. S2CID   3560886. Archived from the original (PDF) on 8 May 2013. Retrieved 18 October 2012.
  12. Royal Society 2019, p. 7.
  13. 1 2 Pennline, Henry W.; et al. (2010). "Separation of CO2 from flue gas using electrochemical cells". Fuel. 89 (6): 1307–14. doi:10.1016/j.fuel.2009.11.036.
  14. Graves, Christopher; Ebbesen, Sune D.; Mogensen, Mogens (2011). "Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability". Solid State Ionics. 192 (1): 398–403. doi:10.1016/j.ssi.2010.06.014.
  15. https://cleanleap.com/extracting-energy-air-future-fuel Archived 2020-10-03 at the Wayback Machine Extracting energy from air - is this the future of fuel?
  16. 1 2 Olah, George; Alain Geoppert; G. K. Surya Prakash (2009). "Chemical recycling of Carbon Dioxide to Methanol and Dimethyl Ether: From Greenhouse Gas to Renewable, Environmentally Carbon Neutral Fuels and Synthetic Hydrocarbons". Journal of Organic Chemistry. 74 (2): 487–98. CiteSeerX   10.1.1.629.6092 . doi:10.1021/jo801260f. PMID   19063591. S2CID   25108611.
  17. "Integration of Power to Gas/Power to Liquids into the ongoing transformation process" (PDF). June 2016. p. 12. Archived (PDF) from the original on August 11, 2017. Retrieved August 10, 2017.
  18. "Technical Overview". Archived from the original on 2019-05-09. Retrieved 2017-08-10.
  19. 1 2 Socolow, Robert; et al. (June 1, 2011). Direct Air Capture of CO2 with Chemicals: A Technology Assessment for the APS Panel on Public Affairs (PDF) (peer reviewed literature review). American Physical Society. Archived (PDF) from the original on September 3, 2019. Retrieved September 7, 2012.
  20. DiMascio, Felice; Willauer, Heather D.; Hardy, Dennis R.; Lewis, M. Kathleen; Williams, Frederick W. (July 23, 2010). Extraction of Carbon Dioxide from Seawater by an Electrochemical Acidification Cell. Part 1 – Initial Feasibility Studies (PDF) (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Archived from the original on March 2, 2020. Retrieved September 7, 2012.
  21. Willauer, Heather D.; DiMascio, Felice; Hardy, Dennis R.; Lewis, M. Kathleen; Williams, Frederick W. (April 11, 2011). Extraction of Carbon Dioxide from Seawater by an Electrochemical Acidification Cell. Part 2 – Laboratory Scaling Studies (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Archived from the original on April 13, 2013. Retrieved September 7, 2012.
  22. Keith, David W.; Holmes, Geoffrey; St. Angelo, David; Heidel, Kenton (2018). "A Process for Capturing CO2 from the Atmosphere". Joule. 2 (8): 1573–1594. doi: 10.1016/j.joule.2018.05.006 . S2CID   134813287.
  23. Electricity Price Archived 2019-01-16 at the Wayback Machine NewFuelist.com (compare to off-peak wind power price graph. Archived 2014-10-06 at the Wayback Machine ) Retrieved September 7, 2012.
  24. Holte, Laura L.; Doty, Glenn N.; McCree, David L.; Doty, Judy M.; Doty, F. David (2010). Sustainable Transportation Fuels From Off-peak Wind Energy, CO2 and Water (PDF). 4th International Conference on Energy Sustainability, May 17–22, 2010. Phoenix, Arizona: American Society of Mechanical Engineers. Archived (PDF) from the original on November 15, 2011. Retrieved September 7, 2012.
  25. Willauer, Heather D.; Hardy, Dennis R.; Williams, Frederick W. (September 29, 2010). Feasibility and Current Estimated Capital Costs of Producing Jet Fuel at Sea (memorandum report). Washington, DC: Chemistry Division, Navy Technology Center for Safety and Survivability, U.S. Naval Research Laboratory. Archived from the original on April 8, 2013. Retrieved September 7, 2012.
  26. 1 2 Tozer, Jessica L. (April 11, 2014). "Energy Independence: Creating Fuel from Seawater". Armed with Science. U.S. Department of Defense. Archived from the original on April 12, 2014.
  27. Koren, Marina (December 13, 2013). "Guess What Could Fuel the Battleships of the Future?". National Journal. Archived from the original on June 3, 2015. Retrieved October 7, 2018.
  28. Tucker, Patrick (April 10, 2014). "The Navy Just Turned Seawater Into Jet Fuel". Defense One. Archived from the original on March 27, 2019. Retrieved October 7, 2018.
  29. Ernst, Douglas (April 10, 2014). "U.S. Navy to turn seawater into jet fuel". The Washington Times. Archived from the original on September 7, 2018. Retrieved October 7, 2018.
  30. Parry, Daniel (April 7, 2014). "Scale Model WWII Craft Takes Flight With Fuel From the Sea Concept". Naval Research Laboratory News. Archived from the original on August 22, 2017. Retrieved October 8, 2018.
  31. Putic, George (May 21, 2014). "US Navy Lab Turns Seawater Into Fuel". VOA News. Archived from the original on June 1, 2016. Retrieved October 7, 2018.
  32. Trakimavicius, Lukas (December 2023). "Mission Net-Zero: Charting the Path for E-fuels in the Military". NATO Energy Security Centre of Excellence.
  33. Center for Solar Energy and Hydrogen Research Baden-Württemberg (2011). "Verbundprojekt 'Power-to-Gas'". zsw-bw.de (in German). Archived from the original on February 16, 2013. Retrieved September 9, 2012.
  34. Center for Solar Energy and Hydrogen Research (July 24, 2012). "Bundesumweltminister Altmaier und Ministerpräsident Kretschmann zeigen sich beeindruckt von Power-to-Gas-Anlage des ZSW". zsw-bw.de (in German). Archived from the original on September 27, 2013. Retrieved September 9, 2012.
  35. "George Olah CO2 to Renewable Methanol Plant, Reykjanes, Iceland" Archived 2021-01-25 at the Wayback Machine (Chemicals-Technology.com)
  36. "First Commercial Plant" Archived February 4, 2016, at the Wayback Machine (Carbon Recycling International)
  37. Okulski, Travis (June 26, 2012). "Audi's Carbon Neutral E-Gas Is Real And They're Actually Making It". Jalopnik (Gawker Media). Archived from the original on 11 February 2021. Retrieved 29 July 2013.
  38. Rousseau, Steve (June 25, 2013). "Audi's New E-Gas Plant Will Make Carbon-Neutral Fuel". Popular Mechanics. Archived from the original on 6 October 2014. Retrieved 29 July 2013.
  39. Calderwood, Dave (2022-10-05). "Zero Petroleum to produce synthetic fuels at Bicester". FLYER. Retrieved 2023-01-13.
  40. "Doty Windfuels". Archived from the original on 2015-05-24. Retrieved 2012-09-04.
  41. "CoolPlanet Energy Systems". Archived from the original on 2013-03-05. Retrieved 2012-09-04.
  42. "Air Fuel Synthesis, Ltd". Archived from the original on 2015-04-27. Retrieved 2012-09-04.
  43. "Kiverdi Receives Energy Commission Funding for Its Pioneering Carbon Conversion Platform". Yahoo! Finance. September 5, 2012. Retrieved September 12, 2012.[ dead link ]
  44. DiPietro, Phil; Nichols, Chris; Marquis, Michael (January 2011). Coal-Fired Power Plants in the United States: Examination of the Costs of Retrofitting with CO2 Capture Technology, Revision 3 (PDF) (report NETL-402/102309). National Energy Technology Laboratory, U.S. Department of Energy. DOE contract DE-AC26-04NT41817. Archived from the original (PDF) on September 4, 2012. Retrieved September 7, 2012.
  45. House, K.Z.; Baclig, A.C.; Ranjan, M.; van Nierop, E.A.; Wilcox, J.; Herzog, H.J. (2011). "Economic and energetic analysis of capturing CO2 from ambient air" (PDF). Proceedings of the National Academy of Sciences. 108 (51): 20428–33. Bibcode:2011PNAS..10820428H. doi: 10.1073/pnas.1012253108 . PMC   3251141 . PMID   22143760. Archived (PDF) from the original on March 17, 2017. Retrieved September 7, 2012. (Review.)
  46. Goeppert, Alain; Czaun, Miklos; Prakash, G.K. Surya; Olah, George A. (2012). "Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere". Energy and Environmental Science. 5 (7): 7833–53. doi:10.1039/C2EE21586A. (Review.)
  47. Lackner, Klaus S.; et al. (2012). "The urgency of the development of CO2 capture from ambient air". Proceedings of the National Academy of Sciences of the United States of America. 109 (33): 13156–62. Bibcode:2012PNAS..10913156L. doi: 10.1073/pnas.1108765109 . PMC   3421162 . PMID   22843674.
  48. 1 2 Steinberg, Meyer (August 1995). The Carnol Process for CO2 Mitigation from Power Plants and the Transportation Sector (PDF) (informal report BNL–62110). Upton, New York: Department of Advanced Technology, Brookhaven National Laboratory. (Prepared for the U.S. Department of Energy under Contract No. DE-AC02-76CH00016). Archived from the original on November 22, 2021. Retrieved September 7, 2012.
  49. Johnston, Ian (2016-10-19). "Scientists accidentally turn pollution into renewable energy". The Independent . Archived from the original on 2016-10-20. Retrieved 2016-10-19.
  50. 1 2 3 4 Slade, Raphael; Bauen, Ausilio (2013-06-01). "Micro-algae cultivation for biofuels: Cost, energy balance, environmental impacts and future prospects". Biomass and Bioenergy. 53: 29–38. Bibcode:2013BmBe...53...29S. doi: 10.1016/j.biombioe.2012.12.019 . hdl: 10044/1/11762 . ISSN   0961-9534.
  51. Cuellar-Bermudez, Sara; Garcia-Perez, Jonathan (2015-07-01). "Photosynthetic bioenergy utilizing CO2: an approach on flue gases utilization for third generation biofuels". Journal of Cleaner Production. 98: 53–65. doi: 10.1016/j.jclepro.2014.03.034 . hdl: 11285/630358 . ISSN   0959-6526.
  52. Maheshwari, Neha; Krishna, Pushpa K.; Thakur, Indu Shekhar; Srivastava, Shaili (2020-08-01). "Biological fixation of carbon dioxide and biodiesel production using microalgae isolated from sewage waste water". Environmental Science and Pollution Research. 27 (22): 27319–27329. Bibcode:2020ESPR...2727319M. doi:10.1007/s11356-019-05928-y. ISSN   1614-7499. PMID   31317429. S2CID   197542555.
  53. Madeira, Marta; Cardoso, Carlos (2017-11-01). "Microalgae as feed ingredients for livestock production and meat quality: A review". Livestock Science. 205: 111–121. doi:10.1016/j.livsci.2017.09.020. ISSN   1871-1413. Archived from the original on 2021-04-28. Retrieved 2021-04-28.
  54. Sun, Amy; Davis, Ryan; Starbuck, Meghan; Ben-Amotz, Ami; Pate, Ron; Pienkos, Philip T. (2011-08-01). "Comparative cost analysis of algal oil production for biofuels". Energy. 36 (8): 5169–5179. doi:10.1016/j.energy.2011.06.020. ISSN   0360-5442.
  55. "The role of hydrogen and ammonia in meeting the net zero challenge" (PDF). The Royal Society. Archived (PDF) from the original on 2 July 2021. Retrieved 25 February 2024.
  56. Usher, Philippa K.; Ross, Andrew B.; Camargo-Valero, Miller Alonso; Tomlin, Alison S.; Gale, William F. (2014-05-04). "An overview of the potential environmental impacts of large-scale microalgae cultivation". Biofuels. 5 (3): 331–349. Bibcode:2014Biofu...5..331U. doi: 10.1080/17597269.2014.913925 . ISSN   1759-7269. S2CID   55670420.
  57. "How to Make Diesel Fuel from Water and Air - Off Grid World". Off Grid World. 2015-05-25. Archived from the original on 2018-12-07. Retrieved 2018-11-30.
  58. MacDonald, Fiona. "Audi Has Successfully Made Diesel Fuel From Carbon Dioxide And Water". ScienceAlert. Archived from the original on 2018-12-07. Retrieved 2018-11-30.
  59. "Reality check: Audi making e-diesel from air and water won't change the car industry". Alphr. Archived from the original on 2015-09-01. Retrieved 2018-12-07.
  60. Mearns, Euan (2015-05-12). "The Thermodynamic and Economic Realities of Audi's E Diesel". Energy Matters. Archived from the original on 2017-02-05. Retrieved 2018-12-07.
  61. Beller, M.; Steinberg, M. (November 1965). Liquid fuel synthesis using nuclear power in a mobile energy depot system (research report BNL 955 / T–396). Upton, New York: Brookhaven National Laboratory, under contract with the U.S. Atomic Energy Commission. hdl:2027/mdp.39015086582635. (General, Miscellaneous, and Progress Reports — TID–4500, 46th Ed.).
  62. Steinberg, M.; Dang, V. (1977). "Production of synthetic methanol from air and water using controlled thermonuclear reactor power—I. technology and energy requirement". Energy Conversion. 17 (2–3): 97–112. Bibcode:1977EnC....17...97S. doi:10.1016/0013-7480(77)90080-8. Archived from the original on 2021-09-27. Retrieved 2021-09-27.
  63. Bushore, U.S. Navy Lieutenant Robin Paul (May 1977). Synthetic Fuel Generation Capabilities of Nuclear Power Plants with Applications to Naval Ship Technology (M.Sc. thesis). Cambridge, Massachusetts: Department of Ocean Engineering, Massachusetts Institute of Technology. Retrieved September 7, 2012.
  64. Terry, U.S. Navy Lieutenant Kevin B. (June 1995). Synthetic Fuels for Naval Applications Produced Using Shipboard Nuclear Power (M.Sc. thesis). Cambridge, Massachusetts: Department of Nuclear Engineering, Massachusetts Institute of Technology. Archived from the original on August 10, 2012. Retrieved September 7, 2012.
  65. Steinberg, M.; et al. (1984). A Systems Study for the Removal, Recovery and Disposal of Carbon Dioxide from Fossil Power Plants in the U.S. (technical report DOE/CH/0016-2). Washington, D.C.: U.S. Department of Energy, Office of Energy Research, Carbon Dioxide Research Division. Archived from the original on November 21, 2021. Retrieved September 8, 2012.

Further reading